Tripp Lite SmartRack SRWALLBRKT4U Handleiding

Tripp Lite Niet gecategoriseerd SmartRack SRWALLBRKT4U

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite SmartRack SRWALLBRKT4U (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 38 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Installation Guide
Contents
Installation
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE
MAY OCCUR!
SRWALLBRKT Vertical Wall Bracket
Español 2 • Français 3
SRWALLBRKT2U
175 lb. (80 kg) Max
SRWALLBRKT4U
175 lb. (80 kg) Max
SRWALLBRKT6U
200 lb. (90 kg) Max
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an ISOBAR6ULTRA
surge protector—a $100 value!
www.tripplite.com/warranty
M6 Screw x12 M6 Cage Nut x12 M6 Cup Washer x12
1 Mount the bracket to a wall. Choose appropriate hardware
according to the weight load and mounting surface.
Installers are responsible to provide hardware.
Installers must verify the supporting surface will safely support
the combined load of the equipment and all attached hardware
and components.
If mounting to wood studs, make sure
mounting screws are anchored
into the center of the studs.
Use of a studnder is
highly recommended.
2 Attach and secure equipment to the top
horizontal rails using four M6 Screws, Cup
Washers and Cage Nuts. Repeat for each
additional unit.
2U bracket panel shown.
All brackets install the same,
regardless of size.
16”
[406 mm]
16”
[406 mm]
2
Guía de Instalación
Contenido
Instalación
PRECAUCIÓN: NO EXCEDA LA CAPACIDAD MÁXIMA DE CARGA INDICADA. ¡PUEDE OCURRIR UNA LESIÓN
SEVERA O DAÑO A LA PROPIEDAD!
Soporte Vertical para Pared SRWALLBRKT
English 1 • Français 3
SRWALLBRKT2U
80 kg (175 lb.) Max
SRWALLBRKT4U
80 kg (175 lb.) Max
SRWALLBRKT6U
90 kg (200 lb.) Max
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2017 Tripp Lite. Todos los derechos reservados.
Tornillo M6 x12 Tuerca de Fijación
M6 x12
Arandela de Copa
M6 x12
1 Instale el soporte en una pared. Elija los accesorios apropiados de
acuerdo al peso y la superficie de instalación.
Los instaladores son responsables de proporcionar los
accesorios.
Cerciórese que la superficie de instalación pueda soportar
con seguridad la carga combinada de todo el
hardware y componentes instalados.
Si se instala en paredes con
entramados de madera,
cerciórese que los tornillos
de instalación estén
anclados en el
centro de los
montantes.
Es muy
recomendable
el uso de un
detector de
montantes.
2 Coloque y fije el equipo a los rieles
horizontales superiores usando cuatro
tornillos M6, arandelas de copa y
tuercas de fijación. Repita para cada
unidad adicional.
16”
[406 mm]
16”
[406 mm]
Se muestra el panel de soporte de
2U. Todos los soportes se instalan
igual, sin importar el tamaño.
3
Guide d’installation
Contenu
Installation
MISE EN GARDE : NE PAS EXCÉDER LA CAPACITÉ PONDÉRALE MAXIMUM INDIQUÉE. DES BLESSURES
GRAVES OU DES DOMMAGES MATÉRIELS RISQUENT DE SE PRODUIRE!
Support mural vertical SRWALLBRKT
English 1 • Español 2
SRWALLBRKT2U
80 kg (175 lb) Max
SRWALLBRKT4U
80 kg (175 lb) Max
SRWALLBRKT6U
90 kg (200 lb) Max
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Droits d’auteur © 2017 Tripp Lite. Tous droits réservés.
Vis M6 x 12 Écrou à cage
M6 x 12
Rondelle à collerette
M6 x 12
1 Monter le support au mur. Choisir la quincaillerie appropriée en
fonction de la charge pondérale et de la surface de montage.
Les installateurs sont responsables de fournir la quincaillerie.
S’assurer que la surface d’appui peut supporter sans risque
la charge combinée de l’équipement et de tout le matériel et
composants attachés.
Si le produit est monté sur des montants
muraux en bois, s’assurer que les
vis de montage sont ancrées
au centre des montants.
Il est fortement
recommandé
d’utiliser un
localisateur
de montants.
2 Fixer l’équipement et le retenir en place
sur les rails horizontaux en utilisant
quatre vis M6, rondelles à collerette et
écrous à cage. Répéter pour chaque
appareil supplémentaire.
16”
[406 mm]
16”
[406 mm]
Panneau du support 2U
illustré. Tous les supports
s’installent de la même façon,
quelle que soit la taille.


Product specificaties

Merk: Tripp Lite
Categorie: Niet gecategoriseerd
Model: SmartRack SRWALLBRKT4U

Heb je hulp nodig?

Als je hulp nodig hebt met Tripp Lite SmartRack SRWALLBRKT4U stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tripp Lite

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd