Tripp Lite PS610HGUK Handleiding

Tripp Lite Niet gecategoriseerd PS610HGUK

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PS610HGUK (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Owner’s Manual

Hospital-Grade

Power Strips

Models: PS410HGUK, PS610HGUK

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

17-04-347-9336F0-EN.indd 1 6/15/2017 10:53:23 AM

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING!

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment within oxygen-enriched

atmospheres, or within 0.3 m of a point at which an oxygen-enriched

atmosphere is intentionally vented.

CAUTION!

• Use only with outlets that are grounded. DO NOT connect to an ungrounded

outlet. DO NOT use with extension cords or adapters that eliminate the

connection to ground.

• The power strip is designed for indoor use only, in a controlled

environment. Install the power strip away from heat-emitting appliances

such as radiators or heat registers. DO NOT install where excessive

moisture or other conductive contaminants are present.

• Never install electrical wiring during a lightning storm.

• The power strip provides the convenience of multiple outlets, but DOES

NOT provide surge or line noise protection for connected equipment.

• Do not attempt to modify the power strip, input plugs or power cables.

• Do not drill into or attempt to open any part of the power strip housing.

There are no user-serviceable parts inside.

Installation

1 Connect Your Power Strip to Your AC Power Line

Plug the power cord into a standard BS 1363 utility outlet. For best performance

of the connected equipment, it is recommended the power strip be connected to a

standard 13A socket that has an isolated earth to eliminate unwanted ground noise.

2 Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension

cords or adapters that eliminate the connection to ground. DO NOT OVERLOAD your

power strip. If the current draw of the equipment connected to your power strip

exceeds your model’s Maximum Load Rating (13A), the fuse located inside the input

plug will blow to prevent any possible damage. When the fuse blows, it will need to

be replaced. Before replacing the fuse, remove excess equipment to prevent another

overload. For fuse replacement instruction, see Power Strip Care and Maintenance.

3 Equipotential Grounding Wire

The power strip is provided with an equipotential ground stud and wire for connecting

equipment. The use of equipotential grounding is recommended to reduce unwanted

leakage currents between equipment.

17-04-347-9336F0-EN.indd 2 6/15/2017 10:53:23 AM

Power Strip Care and Maintenance

Warning: Do not spray with liquid cleaning products.

• To clean, unplug unit and wipe with a clean cloth. Cloth may be dampened with

all-purpose cleaner.

• Check status and operation of the Mains ON indicator light, if applicable.

• Ensure mechanical integrity of case.

• Ensure mechanical integrity of power cord. It should be free of cuts, frays, and

exposed wires/conductors.

• Ensure mechanical integrity of built-in outlet safety covers, if applicable.

• Tripp Lite recommends annual inspection of its products when they are used in a

hospital/medical/healthcare/assisted living environment.

• Check the input plug fuse. Normal operation requires the fuse to be undamaged. If

the fuse is damaged, replace fuse with a British Plug Top Fuse BS 1362 (13A).

13A

FUSE

17-04-347-9336F0-EN.indd 3 6/15/2017 10:53:23 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	PS610HGUK
Kleur van het product:	Beige
Gewicht:	1800 g
Breedte:	75.9 mm
Diepte:	483.1 mm
Hoogte:	46 mm
Snoerlengte:	3.05 m
Gewicht verpakking:	2080 g
Breedte verpakking:	177 mm
Diepte verpakking:	579.9 mm
Hoogte verpakking:	100.1 mm
Materiaal behuizing:	Metaal
Ondersteuning voor plaatsing:	Binnen
Land van herkomst:	China
Kleur kabel:	Beige
(Buitenste) hoofdverpakking hoogte:	335 mm
(Buitenste) hoofdverpakking breedte:	380 mm
(Buitenste) hoofdverpakking brutogewicht:	13180 g
(Buitenste) hoofdverpakking lengte:	599.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	6 stuk(s)
AC-ingangsspanning:	230 V
AC-ingangsfrequentie:	50 - 60 Hz
Aantal producten inbegrepen:	1 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332203257
Aantal AC uitgangen:	6 AC-uitgang(en)
Stroom (max.):	13 A