Tripp Lite PDUMNH20HVAT1 Handleiding

Tripp Lite Niet gecategoriseerd PDUMNH20HVAT1

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite PDUMNH20HVAT1 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 37 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36

Owner’s Manual

Metered Rack-Mount PDU

with Automatic Transfer Switch

Models: PDUMH15HVAT, PDUMH15HVATNET, PDUMH20HVAT,

PDUMH20HVAT1, PDUMH20HVATNET, PDUMH20HVATS,

PDUMNH20HVAT1

Series Number: AGAC7625

1. Important Safety Instructions 2

2. Installation 4

2.1 Mounting the PDU 4

2.2 Connecting the PDU 4

2.3 Networking the PDU 6

3. Features 7

4. Conﬁguration and Operation 10

4.1 Automatic Transfer Switch 10

5. Warranty and Product Registration 12

Español 13

Français 25

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR®

surge protector in our monthly drawing!

tripplite.com/warranty

SAVE THESE INSTRUCTIONS

• This manual contains instructions and warnings that should be followed

during the installation, operation and storage of this product. Failure to

heed these instructions and warnings may affect the product warranty.

• Warning: This equipment is compliant with Class A of CISPR 32. In a

residential environment, this equipment may cause radio interference.

• The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise

protection for connected equipment.

• The PDU is designed for indoor use only, in a controlled environment, away from excess

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

• Keep indoor ambient temperature between 0°C and 50°C (32°F and 122°F).

• The PDU must be installed by a qualified technician only.

• Do not attempt to mount the PDU to an insecure or unstable surface.

• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian

Electrical Code, Part I, C22.1. Be sure to use the proper overcurrent protection for the

installation, in accordance with the plug/equipment rating.

• Connect the PDU to an outlet that is in accordance with your local building codes and that is

adequately protected against excess currents, short circuits and earth faults.

• The electrical outlets supplying power to the equipment should be installed near the equipment

and easily accessible.

• Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that

eliminate the connection to ground.

• Be sure to provide a local disconnect device on any models that are permanently installed

without a plug that is easily accessible.

• Never attempt to install electrical equipment during a thunderstorm.

• Individual equipment connected to the PDU should not draw more current than the individual

PDU’s outlet’s rating.

• The total load connected to the PDU must not exceed the maximum load rating for the PDU.

• Do not attempt to modify the PDU, input plugs or power cables.

• Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable

parts inside.

• Do not attempt to use the PDU if any part of it becomes damaged.

• Use of this equipment in life support applications where failure of this equipment can reasonably

be expected to cause the failure of the life support equipment or to significantly affect its safety

or effectiveness is not recommended.

• The AC Mains tolerance of this equipment is +6/-10%

• Short-circuit backup protection and overcurrent protection is provided by the building installation.

• To reduce the risk of fire, connect only to a circuit provided branch circuit overcurrent protection

in accordance with the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical

Code, Part I, C22.1. Be sure to use maximum 20A overcurrent protection in accordance with

the plug/equipment rating, for the installation.

• The plugs on the power supply cords and appliance inlet serve as the disconnect devices. Make

sure the socket-outlets providing power to the PDU are easily accessible.

• This equipment is not suitable for use in locations where children are likely to be present.

1. Important Safety Instructions

• Only those who are properly trained or qualified to use this device should do so. Anyone who is

not trained or qualified should not use this device unless it is under the supervision of someone

who is properly trained or qualified to do so.

• Children must be supervised to ensure that they do not use the device as a toy.

• Never use the device if the cord and plug are damaged. If the device is not working properly or if

it has been dropped or damaged, take it to an authorized service center for inspection and

repair.

• If the power cord is damaged, it must be replaced by the manufacturer, its authorized service

agent or qualified personnel in order to avoid danger.

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	PDUMNH20HVAT1
Kleur van het product:	Zwart
Gewicht:	4690 g
Breedte:	440.2 mm
Diepte:	375.2 mm
Hoogte:	43.7 mm
Snoerlengte:	3.66 m
Gewicht verpakking:	7710 g
Breedte verpakking:	528.3 mm
Diepte verpakking:	594.4 mm
Hoogte verpakking:	137.2 mm
Soort:	Eenfasig
LED-indicatoren:	Ja
Aan/uitschakelaar:	Ja
Beeldscherm:	LCD
Land van herkomst:	Taiwan
Aantal Ethernet LAN (RJ-45)-poorten:	1
Aantal USB-aansluitingen:	2
Duurzaamheidscertificaten:	CE, RoHS
Temperatuur bij opslag:	-30 - 50 °C
Naleving van duurzaamheid:	Ja
Spanning:	200 - 240 V
Maximaal vermogen:	3840 W
Montage:	Horizontaal
Seriële poort(en):	1
Stekker:	C20 stekker
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Rackcapaciteit:	1U
AC-ingangsfrequentie:	50/60 Hz
Relatieve vochtigheid in bedrijf (V-V):	5 - 95 procent
Aantal AC uitgangen:	10 AC-uitgang(en)
Nominale input voltage:	208 - 240 V
Stopcontacttypes:	C13 coupler, C19 coupler
Stroom (max.):	20 A
PDU types:	Metered, Monitored
Monitoring:	Current, Voltage