Tripp Lite EN1511N4LATCH Handleiding

Tripp Lite Niet gecategoriseerd EN1511N4LATCH

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite EN1511N4LATCH (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

Installation Guide

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Español 7 • Français 13 • Русский 19

NEMA-4 Plastic Wi-Fi Access

Point Enclosure

Model: EN1511N4LATCH

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

www.tripplite.com/warranty

Components List

Installation

IMPORTANT:

Ensure you have received all parts according to the component checklist prior to installing. If any parts are

missing or faulty, visit www.tripplite.com/support for service.

x2 x2

x4 x4 x1

1. Attach Mounting Feet to the Rear of the Enclosure

Installation

• Installers are responsible for providing wall-mounting hardware. Use a minimum of two #10 x 2” or larger screws

(not included) to secure the enclosure in place.

• Make sure mounting screws are anchored into the center of the studs. Use of a stud ﬁnder is highly recommended.

• If there is no stud at the mounting location, it is recommended you use four anchors to secure the enclosure in place.

Due to the weight of the enclosure, plastic expansion wall anchors are not recommended for drywall installations.

Suitable anchors include: threaded drywall anchors, threaded drywall toggles, sleeve-type hollow wall anchors

(a.k.a. molly bolts) or toggle bolts.

• If placing the enclosure over a telecommunications receptacle, remove the wall plate, then fasten the enclosure to the

wall. Once secured, fasten the wall plate over the receptacle.

• If no telecommunications receptacle is available, a surface mount box (or biscuit jack) and equipment cord can be

mounted inside the unit.

• Use an adhesive-backed surface mount box.

2. Mount Enclosure to Wall

Mark the exact

location of the

mounting holes

Attach the

enclosure onto

the wall

Drill pilot holes

Find a wood stud

location for mounting

the enclosure

(Mounting Hardware

Not Included)

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	EN1511N4LATCH
Gewicht:	1800 g
Breedte:	282 mm
Diepte:	101.6 mm
Hoogte:	123.4 mm
Gewicht verpakking:	2330 g
Breedte verpakking:	325.1 mm
Diepte verpakking:	424.9 mm
Hoogte verpakking:	156 mm
Land van herkomst:	China
Geschikt voor:	Binnen & buiten
Materiaal:	Polycarbonaat (PC)
(Buitenste) hoofdverpakking hoogte:	335 mm
(Buitenste) hoofdverpakking breedte:	670 mm
(Buitenste) hoofdverpakking brutogewicht:	15540 g
(Buitenste) hoofdverpakking lengte:	870 mm
Hoeveelheid per (buitenste) hoofdverpakking:	8 stuk(s)
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332217841
Installatieopties:	Ceiling-mounted, Wall-mounted
NEMA-beoordeling:	4