Tripp Lite EBP240V5002 Handleiding

Tripp Lite Niet gecategoriseerd EBP240V5002

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite EBP240V5002 (80 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/80

Owner’s Manual

Extended-Run Battery Cabinet

Not suitable for mobile applications.

BP192V787C-1PH (Single-Phase),

BP480V200 and All BP240V Models

BP480V300 and BP480V400 Models BP480V500 Model

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

1. Table of Contents

1. Introduction 3

2. Important Safety Instructions 4

3. Battery Cabinet Installation 6

3.1 Preparation 6

3.2 Transportation 6

3.3 Mechanical Check 6

3.4 Internal Wiring (Typical) 7

3.5 Preliminary Electrical Check 7

3.6 Battery Cabinet Placement 7

3.7 Electrical Connection 8

3.8 Battery Charger Electrical Connection 8

(Select Models)

3.9 Final Electrical Check 8

4. Operation and Charging 9

4.1 Determine Charging Voltages 9

4.2 Initial Charge 9

4.3 Operational Check 9

4.4 Acceptance Test (Optional) 9

5. Maintenance 10

5.1 Maintenance Schedule 10

6. Diagrams 11

6.1 Battery Cabinet Diagrams 11

6.1.1 BP192V787C-1PH Model (2 Shelves) 11

6.1.2 All BP240V Models (3 Shelves) 12

6.1.3 BP480V200 Model (4 Shelves) 13

6.1.4 BP480V300 and BP480V400 Models 14

(4 Shelves)

6.1.5 BP480V500 Model (4 Shelves) 15

6.2 Battery and Breaker Diagrams 16

6.2.1 192 VDC (Single-Phase) 16

6.2.2 240 VDC (Single-Phase) 17

6.2.3 240 VDC (3-Phase) 18

6.2.4 +/- 240 VDC (3-Phase) 19

6.2.5 EBP-Series (+/- 120 VDC) 20

6.2.6 Busbar Connections for 21

Multi-Cabinet Systems

6.3 Integrated 7A Battery Charger 23

(Select Models)

7. Speciﬁcations 24

7.1 Dimensions and Floor Loading 24

7.2 Recommended Torque 25

8. Storage and Service 26

9. Warranty 26

Español 27

Русский 53

1. Introduction

Tripp Lite’s Extended-Run Battery Cabinets connect to SmartOnline® UPS Systems to provide long-lasting battery backup for data centers,

telecommunications, networks, industrial facilities, security, emergency systems and other mission-critical applications that require high

capacity, high availability and extended runtime.

Features

• Battery cabinets are available in voltages of 192 VDC, 240 VDC or 480 VDC and capacities from 55 to 140AH @ C20 to 1.67VPC.

• Battery cabinets contain multiple 12 VDC batteries connected in series for higher voltages. Multiple battery cabinets may be connected in

parallel for increased runtime.

• Depending on the number of individual batteries contained, each battery cabinet will have 2, 3 or 4 shelves with 4, 8, or 10 individual

batteries (maximum) per tier.

• Battery cabinets with the seismic option are certiﬁed to the 2012 edition of the International Building Code (IBC) and the 2013 edition of

the California Building Code (CBC), to meet IBC and CBC seismic design category F, Ss = 2.0 and importance factor 1.5.

• Hinged lockable door to facilitate access to batteries for periodic maintenance.

• There is a minimum of 5 inches of clearance above the individual batteries for access to terminals.

• Battery cabinet is constructed of heavy gauge welded steel.

• Baked powder coat ﬁnish provides chip and corrosion resistance.

• Battery cabinet is shipped bolted to pallet with a double layer of protective stretch wrap and integrated corner and top protection.

• Appropriate ventilation and convection cooling of the individual batteries is provided via spacing between batteries. Front and rear vents

allow the free ﬂow of warmer air out of the battery cabinet.

• The internal battery series’ circuits are completely wired.

• A molded case circuit breaker is provided for over-current protection (the molded case circuit breaker is ﬁtted with an auxiliary contact).

• User-supplied power output cables can be fed into the battery cabinet through built-in conduit knockouts in the top or sides of the cabinet

(gland plate included).

• For improved safety, higher power density and minimized maintenance, the cabinet systems use Valve-Regulated Lead-Acid (VRLA)

recombinant batteries. The electrolyte in these batteries is immobilized in either an absorbent mat separator or a gelling medium,

eliminating the spilling hazards and maintenance requirements of free liquid electrolyte. There is no need to add water or measure speciﬁc

gravity.

• Because the batteries are recombinant cells that employ an oxygen recombination cycle, minimal gasses are emitted during normal ﬂoat

charging. Each cell contains an individual valve which releases the gas products of overcharge and prevents pressure build-up within the

cell.

• Select battery cabinets (single-phase and “C” models) include an integrated battery charger that requires an AC power connection that is

not part of the UPS output.

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	EBP240V5002
Kleur van het product:	Zwart
Gewicht:	1083630 g
Breedte:	736.6 mm
Diepte:	800.1 mm
Hoogte:	1498.6 mm
Gewicht verpakking:	1119920 g
Breedte verpakking:	736.6 mm
Diepte verpakking:	800.1 mm
Hoogte verpakking:	1638.3 mm
Gebruikershandleiding:	Ja
Materiaal behuizing:	Staal
Vormfactor:	Tower
Land van herkomst:	Taiwan
Accu/Batterij voltage:	120 V
Ondersteund aantal accu's/batterijen:	40
Certificering:	TAA, UL 1778 CSA C22.2 NO. 107.1, CSA, CE EN 62040-1-2:2003, EN 60950-1
Aantal wielen:	4 wiel(en)
Duurzaamheidscertificaten:	CE
Aantal:	2
Naleving van duurzaamheid:	Ja
Compatibele producten:	SV20, SV40, SV60, SV80, SV100, SV120, SV140
(Buitenste) hoofdverpakking hoogte:	1638.3 mm
(Buitenste) hoofdverpakking breedte:	736.6 mm
(Buitenste) hoofdverpakking brutogewicht:	1119920 g
(Buitenste) hoofdverpakking lengte:	800.1 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)
Batterijtechnologie:	Sealed Lead Acid (VRLA)
Zwenkwieltjes:	Ja