Tripp Lite BP24V36-2US Handleiding

Tripp Lite Niet gecategoriseerd BP24V36-2US

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite BP24V36-2US (52 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 123 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/52

Owner’s Manual

BP Series

External Battery Packs

Not suitable for mobile applications.

Introduction 2

Important Safety Instructions 2

Mounting 4

Connection 11

Maintenance 12

Warranty and Product Registration 13

Español 14

Français 27

 40

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

24V Battery Packs 36V Battery Packs 48V Battery Packs 72V Battery Packs

BP24V15RT2U, 14AH

BP24V28-2U, 28AH

BP24V36-2US, 36AH

BP24V70-3U, 70AH

BP36V15-2U, 18AH

BP36V42-3U, 21AH

BP48V24-2U, 18AH

BP48V27-2US, 27AH

BP48V48RT4U, 42AH

BP48V60RT-3U, 42AH

BP72V15-2U, 15AH

BP72V18-2US, 18AH

BP72V28RT-3U, 28AH

19-01-135-9336FF.indb 1 1/9/2019 1:17:56 PM

Introduction

Important Safety Instructions

Tripp Lite BP Series External Battery Packs are designed for use with various Tripp Lite

UPS systems equipped with external battery pack connectors.

SAVE THESE INSTRUCTIONS

WARNING! The mounting shelves are not intended to support more than

one battery pack. Do not stack multiple battery packs on a single set of

mounting shelves. Failure to follow this warning may lead to product

damage and/or risk of personal bodily harm.

• Use caution when lifting battery packs. Because of the considerable weight of

all battery packs, at least two people should assist in lifting and installing

them.

• Make certain the battery packs and UPS use the same DC voltage before

connecting them.

• Use only Tripp Lite external battery packs with overcurrent protection.

Installation is by qualified service personnel only. Contact Tripp Lite Customer

Support at 773.869.1234 for the appropriate Tripp Lite battery pack to

connect.

• Your external metal battery cabinets are provided with a means for

equipotential protective bonding for safety. When using 2-pin connector

external batteries, be sure to bond the metal enclosure of your external

battery to the metal enclosure of the UPS system. Three-pin/conductor battery

packs are equipped with a ground bond plug. Plastic enclosures do not require

bonding. See below for ground bonding strap requirements:

24V Battery Packs

BP24V15RT2U: Plastic enclosure, so ground bonding strap is not required.

BP24V28-2U: 12 AWG ground bonding strap

BP24V36-2US: 12 AWG ground bonding strap

BP24V70-3U: 12 AWG ground bonding strap

36V Battery Packs

BP36V15-2U: 12 AWG ground bonding strap

BP36V42-3U: 12 AWG ground bonding strap

48V Battery Packs

BP48V24-2U: 12 AWG ground bonding strap

BP48V27-2US: 12 AWG ground bonding strap

BP48V48RT4U: 12 AWG ground bonding strap

BP48V60RT-3U: 12 AWG ground bonding strap

Note: The battery connector on 72V battery packs has a built-in ground bonding plug, so an

additional ground bonding strap isn’t needed.

19-01-135-9336FF.indb 2 1/9/2019 1:17:57 PM

Important Safety Instructions

Securely attach the provided ground strap to the UPS system as illustrated

below:

• Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not

recommended. Do not use this equipment in the presence of a flammable

anesthetic mixture with air, oxygen or nitrous oxide.

• Suggested mounting procedures are for common rack types and may not be

appropriate for all rack configurations. User must determine the fitness of rack and

wall-mount hardware and procedures before mounting.

• When connecting multiple battery packs to a single UPS, the battery packs should be

approximately the same age.

• It is normal for sparks to occur when connecting external batteries.

• Do not unplug external batteries from the UPS while the UPS is operating on battery

power, due to the possibility of dangerous arcing.

• Batteries can present a risk of electrical shock and burn from high short-circuit

current. Observe proper precautions. Do not dispose of the batteries in a fire. Do not

open the UPS or batteries. Do not short or bridge the battery terminals with any

object. Unplug and turn off the UPS before performing battery replacement. Use tools

with insulated handles. There are no user-serviceable parts inside the UPS. Battery

replacement should be performed only by authorized service personnel using the

same number and type of batteries (Sealed Lead-Acid). The batteries are

recyclable. Refer to your local codes for disposal requirements or visit

http://www.tripplite.com/support/recycling-program for recycling information. Tripp Lite

offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).

Visit Tripp Lite on the Web at http://www.tripplite.com/products/battery-finder/ to locate

the specific replacement battery for your UPS.

19-01-135-9336FF.indb 3 1/9/2019 1:17:57 PM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	BP24V36-2US
Kleur van het product:	Zwart
Gewicht:	26940 g
Breedte:	439.4 mm
Diepte:	351 mm
Hoogte:	86.6 mm
Gewicht verpakking:	32660 g
Breedte verpakking:	581.7 mm
Diepte verpakking:	535.9 mm
Hoogte verpakking:	228.6 mm
Land van herkomst:	Taiwan
Accu/Batterij voltage:	24 V
Levensduur batterij/accu:	6 jaar
Duurzaamheidscertificaten:	RoHS
Compatibiliteit:	TrippLite SMART750RMXL2U, SU750RTXL2U, SU750RTXLCD2U, SU1000RTXL2UA, SU1000RTXLCD2U, SUINT1000RTXL2UA
(Buitenste) hoofdverpakking hoogte:	228.6 mm
(Buitenste) hoofdverpakking breedte:	581.7 mm
(Buitenste) hoofdverpakking brutogewicht:	32660 g
(Buitenste) hoofdverpakking lengte:	535.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	1 stuk(s)