Tripp Lite B140-101X-U Handleiding

Tripp Lite Niet gecategoriseerd B140-101X-U

Lees hieronder de 📖 handleiding in het Nederlandse voor Tripp Lite B140-101X-U (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Owner’s Manual

DVI over Cat5 Extender Kit

Model: B140-101X-U

• Extends a DVI-D signal up to 125 ft. at 1920 x 1200 @ 60Hz, including 1080p

• Receiver unit features built-in Equalization control for video adjustment

• USB Micro-B port supplies power to the receiver unit; no external power supply

required

• Compatible with all operating systems

• Plug and play; no software or drivers required

• HDCP compatible

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Package Includes

• B140-101X-U Transmitter Unit

• B140-101X-U Receiver Unit

• USB Micro-B Cable – 3 ft.

• Screwdriver

• Owner’s Manual

15-08-270-9334A4.indd 1 10/1/2015 11:55:29 AM

Optional Accessories

System Requirements

Installation

• N202-Series Cat6 24 AWG Solid Wire

Patch Cables

• UR05C-Series USB Micro-B Charge-

Only Cables

• U280-002-W12 2-Port USB Wall

Charger

• UAC-1B 1-Port USB Wall Charger

• Computer with a DVI output port • Display with a DVI input port

1. Connect the transmitter unit’s built-in DVI cable to the computer’s DVI output port.

2. Connect the RJ45 port on the transmitter to the RJ45 port on the receiver using

Cat5e/6 cable.

Note: See the installation diagram for maximum extension distance and video resolutions.

3. Connect the receiver unit’s built-in DVI cable to a DVI monitor input port.

4. Connect the included USB Micro-B cable to the receiver unit and a USB port on

the display or a USB wall outlet.

5. Power on the DVI source and DVI display. The green LEDs on the transmitter’s

and receiver’s RJ45 ports will illuminate to indicate they are receiving power. The

orange LEDs on the receiver’s RJ45 ports will illuminate to indicate it is receiving a

signal from the source.

The orange LED on the transmitter’s RJ45 port does not illuminate.Note:

6. If necessary, adjust the Equalization control on the remote unit to improve the

video image.

Note: An improper Equalization setting can cause the monitor to not display a picture. Try

each Equalization setting until an acceptable image is displayed.

Notes:

1. Test to make sure the entire installation works properly before pulling cables through ceilings/

walls.

2. To achieve maximum distance and performance, 24 AWG solid wire Cat5e/6 cable must be

used. The use of stranded wire Cat5e/6 cable or cable with a gauge size higher than 24 AWG

will result in a shorter extension distance. All Tripp Lite N202-Series Cat6 cables are made with

24 AWG solid-wire cabling.

3. Make sure the power to all connected devices is turned off prior to installation.

24 AWG SOLID-WIRE

CAT5/6 CABLE

DVI

COMPUTER

DVI DISPLAY

Up to 125 ft. at 1080p,

1920 x 1200

15-08-270-9334A4.indd 2 10/1/2015 11:55:29 AM

Troubleshooting

If you are unable to get an acceptable image after following the installation

instructions, try the troubleshooting tips below:

1. Is the USB Micro-B cable that shipped with the product connected and

plugged into a working power source? For the product to function properly, the

receiver must be connected to and receiving power from the USB Micro-B cable.

2. Was the power to the DVI source turned off prior to installation? If not,

restart your computer.

3. What resolution are you trying to reach? Installation See the section in this

manual for details on maximum distance and resolution. The shorter the extension

distance, the higher the resolution you will be able to obtain. If you are not able to

get an acceptable image, try lowering your computer’s video resolution or adjusting

the refresh rate.

4. What type of cabling are you using? Inferior cabling can result in poor

performance, so it is important that you use cables that can support the video

resolution you are trying to obtain. To achieve maximum distance and resolution,

24 AWG solid-wire UTP cable (such as Tripp Lite’s N202-Series cables) must be

used.

5. Test your cables to ensure they are working properly. For example, connect

your Cat5e/6 cable between a computer and a network to verify that it establishes

a network connection.

6. Do you have any patch panels or other devices in between the transmitter

and receiver units? Tripp Lite’s DVI over Cat5 Extender Kit is designed to be

connected directly from the transmitter to the receiver via UTP cable. The more

connection points that are between the source and the remote monitor, the more

likely signal degradation will occur, causing poor performance. If you have a patch

panel or other device in between, it should be removed from the installation.

7. Do you have a splitter, switch or other device in between the computer

and transmitter, or in between the receiver and display? Tripp Lite’s DVI

over Cat5 Extender Kit is designed for the transmitter to connect directly with

the source computer and for the receiver to connect directly to the display. If you

have a splitter, switch, or other device in between, it should be removed from the

installation.

8. Check your cabling for any damage that may have occurred during

installation. If a cable connector is loosened from pulling through ceilings/walls or

the cable jacket is damaged, causing the wiring to be exposed, you will not be able

to achieve maximum performance.

9. Are the transmitter and/or receiver units located in an area that exposes

them to elevated temperatures? If the product is overheating, it will not function

properly.

15-08-270-9334A4.indd 3 10/1/2015 11:55:29 AM

Product specificaties

Merk:	Tripp Lite
Categorie:	Niet gecategoriseerd
Model:	B140-101X-U
Kleur van het product:	Zwart
Gewicht verpakking:	200 g
Breedte verpakking:	142 mm
Diepte verpakking:	43.9 mm
Hoogte verpakking:	199.9 mm
Gebruikershandleiding:	Ja
LED-indicatoren:	Ja
Ethernet LAN:	Ja
Ondersteunde video-modi:	480i, 480p, 720p, 1080i, 1080p
Maximum resolutie:	1920 x 1200 Pixels
Land van herkomst:	Taiwan
Aantal Ethernet LAN (RJ-45)-poorten:	2
HDCP:	Ja
Ondersteunde grafische resoluties:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA)
Plug and play:	Ja
Aansluiting(en):	DVI-D
Maximale afstand:	38 m
Aansluiting video:	DVI
(Buitenste) hoofdverpakking hoogte:	455.9 mm
(Buitenste) hoofdverpakking breedte:	213.1 mm
(Buitenste) hoofdverpakking brutogewicht:	2250 g
(Buitenste) hoofdverpakking lengte:	152.9 mm
Hoeveelheid per (buitenste) hoofdverpakking:	10 stuk(s)
Code geharmoniseerd systeem (HS):	8525.50.3035
GTIN (EAN/UPC)-nummer (buitenste) hoofdverpakking:	10037332190236
Ondersteundende kabel types:	Cat5e, Cat6
Hoeveelheid Video ports:	2