Trekstor PrimeTab T13B Handleiding

Trekstor Tablet PrimeTab T13B

Lees hieronder de 📖 handleiding in het Nederlandse voor Trekstor PrimeTab T13B (2 pagina's) in de categorie Tablet. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Diese Kurzanleitung, die Online-Bedienungsanleitung und das
Heft "Sicherheitshinweise und rechtliche Bestimmungen" sind
Bestandteile des Produktes.
Lesen Sie bitte alle drei Dokumente aufmerksam, bevor Sie Ihr
Primetab in Betrieb nehmen. Sie enthalten wichtige Hinweise zur
Benutzung, Sicherheit und Entsorgung des Primetab.
Bewahren Sie diese Dokumente sorgältig auf und händigen
Sie sie bei Weitergabe des Primetab vollständig an den neuen
Besitzer aus.
Die Online-Bedienungsanleitung sowie die FAQs
zu Ihrem Primetab finden Sie unter:
www.trekstor.de/service-support.html
Lieferumfang
TREKSTOR PRIMETAB T13B
Netzteil (100 V - 240 V)
Reinigungstuch
Kurzanleitung
Sicherheitshinweise und rechtliche Bestimmungen
PRIMECOVER*/PRIMECOVER+*
Nehmen Sie alle Teile aus der Verpackung und entfernen Sie
das Verpackungsmaterial, inkl. der Schutzfolien, vollständig.
Überprüfen Sie die Vollständigkeit der Lieferung.
Wenn Sie fehlende Teile oder Beschädigungen feststellen,
wenden Sie sich umgehend an den Kundendienst.
Technische Daten
Prozessor (CPU): Intel® Celeron® N3350 Prozessor*,
Intel® Pentium® N4200 Prozessor*
Betriebssystem: Windows 10 Home
Graikprozessor (GPU): Intel® HD Graphics 500*,
Intel® HD Graphics 505*
RAM/Interner Speicher: 4/64 GB
Display-Größe: 13,3" (33,8 cm)
Bildschirm: Kapazitives 10-Punkt-Multitouch-
Full-HD-IPS-Display
(1920 x 1080; 16:9)
Kamera: 1,8 MP (Front)
Schnittstellen: M.2 SSD extension,
2 x USB 3.1 Gen 1, Micro-HDM,
USB-Type-C™ 3.1 Gen 1,
Audio out/Mic in (3,5 mm)
Netzwerk: WLAN (802.11 ac/b/g/n: 2.4 GHz/
5 GHz), Bluetooth 4.2, Miracast™
Karteneinschub: M.2 SSD (42 mm - B key),
microSD(HC/XC) bis zu 256 GB
Weitere Merkmale: Fingerabdrucksensor*, Backlight*,
G-Sensor, Hall-Sensor,
Stereo-Lautsprecher, Dual-Mikrofon
Größe: ca. 335 x 210 x 15 mm
Gewicht: ca. 1465 g
Material/Farbe: Aluminium, Kunststoff/Dunkelgrau
Akku: Li-Polymer (laden über DC IN)
* Modellabngige Ausstattungsoption
Betrieb und Lagerung
Temperaturbereich: von 5° C bis 30° C
Relative Luftfeuchtigkeit: von 30 % bis 70 %
Technische Daten zum Netzteil und Akku entnehmen Sie bitte der ausührlichen
Bedienungsanleitung. Der Akku dieses Produktes kann nicht ohne Weiteres vom
Benutzer selbst ausgetauscht werden.
Kurzanleitung
Das Primetab auladen
Laden Sie Ihr Primetab vollständig auf, bevor Sie es zum ersten
Mal verwenden.
Verbinden Sie den DC-Stecker des mitgelieferten Netzteils
mit der Ladebuchse (DC IN) des Primetab.
Stecken Sie anschliend das Netzteil in eine Steckdose.
Die Lade-LED leuchtet während des Ladevorgangs.
Lassen Sie das Netzteil nur so lange an der Steckdose, bis
der Akku des Primetab vollständig geladen ist. Trennen Sie
außerdem immer das Netzteil vom Primetab, wenn Sie das
Primetab nicht laden.
Die Tastatur und den Ständer verwenden
Setzen Sie das Tablet auf die Tastatur auf und öffnen Sie
den Ständer, indem Sie mit beiden Händen in die seitlich
angebrachten Einkerbungen des Tablets greifen und den
Ständer vom Tablet wegziehen.
Das Primetab zum ersten Mal einschalten
a Drücken Sie ür ca. 3 Sekunden den Ein-/Ausschalter,
um das Primetab einzuschalten. Es erscheint der
Startassistent.
b Befolgen Sie die Anweisungen des Startassistenten, um Ihr
Primetab einzurichten.
Im Laufe des Startassistenten werden Sie aufgefordert,
sich mit Ihrem Microsoft-Konto anzumelden. Falls Sie noch
über kein Microsoft-Konto verfügen, richten Sie an dieser
Stelle bitte eines ein.
Nach Beendigung des Startassistenten wird Ihr Primetab
koniguriert. Dies kann einige Minuten in Anspruch nehmen.
Schalten Sie das Primetab in dieser Zeit nicht aus!
Den Bildschirm entsperren
Sobald das Primetab eingerichtet ist (und nach jedem
weiteren Einschalten und Hochfahren), erscheint der
Sperrbildschirm. Drücken Sie eine beliebige Taste auf der
Tastatur, um den Bildschirm zu entsperren.
Wenn Ihr Primetab durch ein Passwort geschützt ist,
müssen Sie anschließend das Passwort eingeben.
Alternativ können Sie sich auch über Windows Hello an
Ihrem Primebook anmelden. Wählen Sie "Einstellungen"
"Konten" "Anmeldeoptionen" "Windows Hello",
um diese Funktion zu aktivieren und einzurichten.
Das Startmenü
Um das Startmenü einzublenden, klicken Sie auf das
Windows-Symbol links unten im Display oder drücken Sie die
Windows-Taste auf der Tastatur. Ein erneutes Drücken blendet das
Startmenü wieder aus.
Das Startme besteht aus der
"klassischen" Navigationsliste (A)
und einem nützlichen App-Bereich (B)
rechts von der Navigationsliste.
In der Navigationsliste inden
Sie unter anderem den Link zum
Öffnen der Einstellungen (Zahn-
radsymbol). Im App-Bereich
können Sie Apps und Favoriten in
Form von Live-Kacheln "anheften"
und organisieren.
"Unterhalb" der Navigationsliste (A) finden Sie eine
alphabetisch geordnete Liste aller installierten Apps.
Um zu dieser zu gelangen, scrollen Sie in der
Navigationsliste nach oben.
1EN
Das Info-Center
Das Info-Center ist eine ein-und ausblendbare Leiste mit Kurzlinks
zu einigen wichtigen Funktionen des Primetab.
Um das Info-Center aufzurufen, klicken Sie auf das Notizzettel-
Symbol rechts unten.
WLAN aktivieren & Browser aufrufen
a Rufen Sie die Einstellungen auf (s. "Das Startmenü").
b Klicken Sie in den Einstellungen auf "Netzwerk und
Internet".
c Klicken Sie im folgenden Bildschirm links auf "WLAN".
d Klicken Sie auf den Schieber bzw. auf das Wort "Aus".
Neben dem Schieber erscheint nun das Wort "Ein".
Das Primetab sucht nach allen verfügbaren
Drahtlosnetzwerken in der he und zeigt diese anschließend
als Liste an ("Verfügbare Netzwerke anzeigen").
e Klicken Sie auf das Netzwerk, mit dem Sie sich verbinden
möchten.
f Geben Sie falls nötig den Netzwerkschlüssel (Passwort) ein.
g Klicken Sie auf "Verbinden". Das Primetab verbindet sich
mit dem ausgewählten Netzwerk.
Sie finden den Button zum Aufrufen des Internetbrowsers
in der Taskleiste unten im Display. Klicken Sie auf das
kleine blaue "e", um den Browser aufzurufen. Um eine
Internetadresse (URL) einzugeben, klicken Sie in die mittig
oben im Fenster angezeigte Suchleiste.
Reset
Sollte sich das Primetab "auhängen" und nicht mehr
reagieren, nnen Sie es zurücksetzen. Halten Sie dazu den
Ein-/Ausschalter mindestens 10 Sekunden lang gedrückt, bis
sich das Primetab ausschaltet. Warten Sie ca. 20 Sekunden
und schalten Sie das Primetab ganz normal wieder ein.
Durch das Zurücksetzen des Primetab gehen nicht
gespeicherte Dateien verloren.
Das Primetab ausschalten
Standby
Um den Standby-Modus zu aktivieren, drücken Sie kurz
den Ein-/Ausschalter. Erneutes kurzes Drücken weckt das
Primetab aus dem Standby-Modus auf.
Herunterfahren
Öffnen Sie das Startmenü. Klicken Sie im Startmenü unten
auf " " und anschließend auf "Herunterfahren".
Das Primetab ährt herunter.
Energie sparen
Deaktivieren Sie die WLAN-Funktion, wenn Sie sie
nicht verwenden.
Lassen Sie das Netzteil nur so lange an der Steckdose,
bis der Akku des Primetab vollständig geladen ist. Trennen
Sie außerdem immer das Netzteil vom Primetab, wenn Sie
das Primetab nicht laden.
Reduzieren Sie in den Einstellungen unter "System"
"Bildschirm" die Displayhelligkeit.
Aktivieren Sie den Standby-Modus oder schalten Sie das
Primetab vollständig aus, wenn Sie das Primetab nicht
verwenden.
This quick guide, the online operating instructions and the
"Important safety and legal information" booklet are part of
the product.
Please read all three documents carefully before you turn on
your device. They contain important information about device
safety, usage and disposal.
Please keep these documents in a safe place and pass them
on in full to the new owner if the device changes hands.
The online operating instructions and FAQs for your Primetab
can be found at:
www.trekstor.de/servicesupport.html
Package contents
TREKSTOR PRIMETAB T13B
Power adapter (100 V - 240 V)
Cleaning cloth
Quick guide
Important safety and legal information
PRIMECOVER*/PRIMECOVER+*
Remove all components from the packaging and remove the
packaging material, including the protective ilm. Check to
ensure that the delivery is complete.
If you ind that there are missing or damaged components,
contact customer service immediately.
Technical speciications
Processor (CPU): Intel® Celeron® N3350 processor*,
Intel® Pentium® N4200 processor*
Operating system: Windows 10 Home
Graphics unit (GPU): Intel® HD Graphics 500*,
Intel® HD Graphics 505*
RAM/Internal storage: 4/64 GB
Screen size: 13.3" (33.8 cm)
Display: 10-point capacitive multi-touch
Full HD IPS display
(1920 x 1080; 16:9)
Camera: 1.8 MP (front)
Interfaces: M.2 SSD extension,
2 x USB 3.1 Gen 1, Micro-HDM,
USB-Type-C™ 3.1 Gen 1,
audio out/mic in (3.5 mm)
Network: WLAN (802.11 ac/b/g/n: 2.4 GHz/
5 GHz), Bluetooth 4.2, Miracast™
Card slot: M.2 SSD (42 mm - B key),
microSD(HC/XC) up to 256 GB
More: Fingerprint sensor*, backlight*,
G-Sensor, Hall-Sensor,
stereo speaker, dual-microphone
Size: approx. 335 x 210 x 15 mm
Weight: approx. 1465 g
Material/Color: Aluminium, plastic/Dark grey
Battery: Lithium polymer
(charging via DC IN)
* Feature option depending on model
Operation and storage
Temperatures: between C to 3 C
Relative humidity: of 30 % to 70 %
Refer to the detailed operating instructions for technical speciications on the
power adapter and battery. The battery in this product cannot be easily replaced
by users themselves.
Quick guide
Charging the Primetab
Please charge your Primetab fully before using it for the
irst time.
Connect the DC plug on the supplied power adapter to the
charging socket (DC IN) on the Primetab.
Then plug the power adapter into a socket.
The charging LED lights up while the device is charging.
Only leave the power adapter connected to the socket until
the battery of the Primetab is fully charged. In addition,
always disconnect the power adapter from the Primetab
when you are not charging the Primetab.
Use the keyboard and the kickstand
Place the tablet on the keyboard and open the kickstand by
putting both hands in the laterally attached notches of the
tablet and pull the kickstand from the tablet.
Turning on the Primetab for the irst time
a Press the on/off switch for about 3 seconds to switch
on the Primetab. The setup assistant will then appear
on the screen.
b Follow the setup assistant instructions to set up your
Primetab.
During the startup, the wizard prompts you to register for
your Microsoft account. If you do not yet have a Microsoft
account, please set one up here.
After completion of the startup, your Primetab is conigured.
This may take several minutes to complete. Do not turn the
Primetab off during this time!
Unlocking the display
As soon as the device has been set up (and every time it is
subsequently switched on and booted up), the lock screen
appears. Press any key on the keyboard to unlock the screen.
If your Primetab is password-protected, you must then
enter the password.
Alternatively, you can also log into your Primebook via
Windows Hello. To activate and set up this feature,
select "Settings" "Accounts" "Sign-in options"
"Windows Hello".
Start menu
To display the start menu, click the Windows icon in the bottom
left of the display or press the Windows button on the keyboard.
Press the icon a second time to hide the Start menu.
The Start menu consists of the
classic navigation list (A) and
a useful app area (B) to the right
of the navigation list.
Among other things, the navigation
list includes a link to open Settings
(cog wheel icon). In the app area,
you can pin apps and favourites in
the form of live tiles and organise
them.
There is an alphabetically ordered list of all the apps
installed underneath the navigation bar (A).
To access this, scroll the navigation bar upwards.
The Action Center
The Info Center is a bar with quick links to some important
Primetab functions, which you can either display or hide.
To access the Info Center click the memo symbol in the bottom
right-hand corner.
Activating WiFi and opening the browser
a Call up Settings (see "Start menu").
b In the settings, click "Network & Internet".
c Click "Wi-Fi" on the left in the next screen.
d Click the slider or the word "Off". The word "On" now
appears next to the slider.
The Primetab searches for all available wireless networks
nearby and then displays them as a list ("Show available
networks").
e Click the network that you wish to connect to.
f Enter the network key (password) if necessary.
g Click "Connect". The Primetab connects to the selected
network.
The button for launching the Internet browser can be found
on the task bar at the bottom of the display. Click the little
blue "e" to launch the browser. To enter an Internet address
(URL), click the search bar displayed centrally at the top of
the window.
Reset
If the Primetab "freezes" and no longer responds, you can
reset it. Press and hold down the on/off switch for at least 10
seconds until the Primetab switches off. Wait for about 20
seconds and then turn the Primetab on normally.
Any files that have not been saved will be lost when the
Primetab is reset.
Switching off the Primetab
Standby
Briely press the on/off switch on the device to activate the
standby mode. Press it again quickly to take the Primetab out
of standby mode.
Shutting down
Open the Start menu. Click " " in the bottom area of the
Start menu and then tap "Shut down". The Primetab
shuts down.
Saving energy
Deactivate the WiFi function when it is not in use.
Only leave the power adapter connected to the socket until
the Primetab's battery is fully charged. In addition, always
disconnect the power adapter from the Primetab when
you are not charging the Primetab.
Reduce the display brightness under "System" "Display"
in the settings.
Activate standby mode or turn off the Primetab
completely if you are not using the Primetab.
Willkommen WelcomeDE EN
DE Bedienelemente
& Anschlüsse
EN Controls & Ports
Deze snelstartgids, de online-bedieningshandleiding en het
document "Veiligheidsaanwijzingen en wettelijke bepalingen"
maken deel uit van het product.
Neem alle drie de documenten zorgvuldig door voordat u
het apparaat in gebruik neemt. Ze bevatten belangrijke
aanwijzingen voor het gebruik, de veiligheid en de afvoering
van het apparaat.
Bewaar deze documenten zorgvuldig en geef ze bij overdracht
van het apparaat door aan de nieuwe eigenaar.
en FAQ‘s De online-bedieningshandleiding
over uw Primetab vindt u onder:
www.trekstor.de/servicesupport.html
Inhoud van de verpakking
TREKSTOR PRIMETAB T13B
Voeding (100 V – 240 V)
Reinigingsdoek
Snelstartgids
Veiligheidsaanwijzingen en wettelijke bepalingen
PRIMECOVER*/PRIMECOVER+*
Haal alle onderdelen uit de verpakking en verwijder al het
verpakkingsmateriaal en beschermfolie. Controleer of de
inhoud van de verpakking compleet is.
Ontbreken er onderdelen of is er iets beschadigd geraakt,
neem dan onmiddellijk contact op met de klantenservice
Technische speciicaties
Processor (CPU): Intel® Celeron® N3350 processor*,
Intel® Pentium® N4200 processor*
Besturingssysteem: Windows 10 Home
Graische processor (GPU): Intel® HD Graphics 500*,
Intel® HD Graphics 505*
RAM/Interne geheugen: 4/64 GB
Schermdiagonaal: 13,3" (33,8 cm)
Scherm: Capacitief 10-punts-multitouch-
Full-HD-IPS-display
(1920 x 1080; 16:9)
Camera: 1,8 MP (voorzijde)
Interfaces: M.2 SSD extension, Micro-HDM,
2 x USB 3.1 Gen 1,
USB-Type-C™ 3.1 Gen 1,
Audio out/Mic in (3,5 mm)
Netwerk: WLAN (802.11 ac/b/g/n: 2.4 GHz/
5 GHz), Bluetooth 4.2, Miracast™
Kaartsleuf: M.2 SSD (42 mm - B key),
microSD(HC/XC) tot 256 GB
Andere kenmerken: Vingerafdruksensor*, Hall-Sensor,
G-Sensor, Achtergrondverlichting*,
stereo-luidspreker, dual-microfoon
Afmetingen: ca. 335 x 210 x 15 mm
Gewicht: ca. 1465 g
Materiaal/Kleur: Aluminium, kunststof/Donkergrijs
Batterij: Li-polymeer (laden via DC IN)
* Ahankelijk van model
Gebruik en opbergen
Temperatuur: van C tot 30° C
Relatieve luchtvochtigheid: van 30 % tot 70 %
De technische speciicaties van de voeding en batterij vindt u in de uitvoerige
bedieningshandleiding. De batterij in dit product is door de gebruiker niet
gemakkelijk vervangbaar.
Snelstartgids
De Primetab opladen
Laad de Primetab volledig op voor het eerste gebruik.
Sluit de DC-stekker van de meegeleverde voeding aan
inoplaadbus (DC IN) op uw Primetab.
Sluit de voeding vervolgens aan op een stopcontact.
De laad-LED brandt tijdens het opladen.
Koppel de voeding los van het stopcontact als de batterij
van de Primetab volledig opgeladen is. Koppel ook altijd de
voeding los van de Primetab als het apparaat niet wordt
opgeladen.
Gebruik van het toetsenbord en de kickstand
Plaats de tablet op het toetsenbord en zet het met de
kickstand schuin of rechtop door met beide handen in de
uitsparingen van de zijkant van de tablet te grijpen en de
kickstand van de tablet weg te trekken.
De Primetab voor de eerste keer inschakelen
a Druk ongeveer 3 seconden op de aan-/uitschakelaar om de
Primetab in te schakelen. De opstarthulp verschijnt.
b Volg de aanwijzingen van de opstarthulp om de Primetab
in te stellen.
Tijdens de uitvoering van de opstarthulp wordt u gevraagd
u aan te melden met uw Microsoft-account. Indien u nog
geen Microsoft-account hebt, kunt u er hier een maken.
Als de opstarthulp is voltooid, wordt de Primetab
geconigureerd. Dit kan enige minuten in beslag nemen.
Schakel de Primetab gedurende deze tijd niet uit!
De display ontgrendelen
Als de Primetab is geconigureerd (en steeds na opnieuw
inschakelen en opstarten) verschijnt een vergrendelingsscherm.
Druk op een willekeurige toets op het toetsenbord om het
beeldscherm te ontgrendelen.
Als de Primetab met een wachtwoord is beveiligd, moet u
vervolgens het wachtwoord invoeren.
U kunt zich ook via Windows Hello bij uw Primebook
aanmelden. Selecteer "Instellingen" "Accounts"
"Aanmeldingsopties" "Windows Hello" om deze functie
in te schakelen en in te stellen.
Het startmenu
Klik op het Windows-pictogram linksonder op de display of
druk op de Windows-toets op het toetsenbord om het
startmenu weer te geven. Als u opnieuw op het pictogram
drukt, wordt het startmenu weer verborgen.
Het startmenu bestaat uit de
"klassieke" navigatiebalk (A) en
een handig overzicht met apps
(B) rechts van de navigatiebalk.
In de navigatiebalk staat onder
andere een koppeling om de
instellingen te openen
(tandwielpictogram). In het
overzicht met apps kunt u apps en
favorieten in de vorm van live-tegels
"vastzetten" en organiseren.
"Onder" de navigatiebalk (A) staat een alfabetisch
gesorteerde lijst met alle geïnstalleerde apps.
Scroll hiervoor in de navigatiebalk omhoog.
Het actiecentrum
Het actiecentrum is een balk met snelkoppelingen naar een
paar belangrijke functies van de Primetab, die kan worden
weergegeven en verborgen.
Klik op het pictogram met het notitieblaadje in de rechter
benedenhoek om het actiecentrum te openen.
WLAN inschakelen en browser openen
a Open de Instellingen (zie "Het startmenu").
b Klik in de Instellingen op "Netwerk en internet".
c Klik op het volgende scherm links op "Wi-Fi".
d Sleep de schuifregelaar naar het woord "Uit". Naast de
schuifregelaar verschijnt het woord "Aan".
De Primetab zoekt naar alle beschikbare draadloze
netwerken in de buurt en geeft deze vervolgens in een lijst
weer ("Beschikbare netwerken weergeven").
e Klik op het netwerk waarmee u verbinding wilt maken.
f Voer zo nodig de netwerksleutel (wachtwoord) in.
g Klik op "Verbinding maken". De Primetab maakt verbinding
met het geselecteerde netwerk.
De knop om de browser te openen staat in de taakbalk
onder in het scherm. Klik op de kleine blauwe "e" om de
browser te openen. Klik in het midden van de zoekbalk
boven in het venster om een webadres (URL) in te voeren.
Reset
Als de Primetab "vastloopt" en niet meer reageert,
kunt u het apparaat resetten. Hiervoor houdt u de aan-/
uitschakelaar minstens 10 seconden ingedrukt totdat de
Primetab wordt uitgeschakeld. Wacht ongeveer 20 seconden
en schakel de Primetab vervolgens weer in.
Als u de Primetab reset, gaan niet-opgeslagen bestanden
verloren.
De Primetab uitschakelen
Stand-by
Druk kort op de aan-/uitschakelaar om de stand-bymodus
in te schakelen. Als u nogmaals kort op de schakelaar drukt,
wordt de Primetab uit de stand-bymodus gehaald.
Afsluiten
Open het startmenu. Klik onder in het startmenu op " " en
vervolgens op "Afsluiten". De Primetab wordt afgesloten.
Energie besparen
Schakel de WLAN-functie uit als u die niet gebruikt.
Koppel de voeding los van het stopcontact als de batterij
van de Primetab volledig opgeladen is. Koppel ook altijd de
voeding los van de Primetab als het apparaat niet wordt
opgeladen.
Stel de display minder helder in bij de Instellingen onder
"Systeem" "Beeldscherm".
Schakel de stand-bymodus in of schakel de Primetab
helemaal uit als u het apparaat niet gebruikt.
NL Bedieningselementen
en aansluitingen
Copyright © 2018 • TREKSTOR GmbH
Copyright laws prohibit copying any data of this product or the contents
of this manual (illustrations, related documents etc.) in whole or in parts
without the permission of the copyright holder. TrekStor is a registered
trademark of TrekStor Ltd. in the European Community and other countries.
Intel and Intel Atom are trademarks of Intel Corporation in the U.S. and/
or other countries. Windows and Windows 10 Home are either registered
trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries. HDMI, the HDMI Logo and High-Deinition Multimedia
Interface are trademarks or registered trademarks of HDMI Licensing LLC.
The Bluetooth word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by TREKSTOR GmbH is
under license. All other trademarks are the property of their respective owners.
QG-PTT13B-V1-10-DE-EN-NL-180406
Hinweis zum Kundendienst
Um direkten Kontakt zu unserem Service-Team
aufzunehmen, besuchen Sie bitte die Seite:
www.trekstor.de/support-de.html
Notes on customer service
To contact our service team directly, please visit:
www.trekstor.de/support-en.html
Aanwijzing voor klantenservice
Ga naar de volgende pagina om direct contact
op te nemen met ons serviceteam:
www.trekstor.de/support-nl.html
Welkom NL
TREKSTOR GmbH
Berliner Ring 7
64625 Bensheim,
Germany
www.trekstor.de
PRIMETAB T13B
DE KURZANLEITUNG
EN QUICK GUIDE
NL SNELSTARTGIDS
M.2 SSD e xtension
F
G
D
E
H
BC
A
K
L
M
N
Q
I
T
U
S
V
W
P
Q
R
O
J
A) Speicherkartenleser
B) Lautstärkeregelung
C) Ein-/Ausschalter
D) Audio-Buchse
E) USB-Buchse 3.1 Gen 1
F) M.2 SSD-Schacht
G) Ständer
H) Ständer Einkerbung
I) Dual-Mikrofon
J) Lade-LED
K) DC IN
L) Micro-HDMI®-Buchse
M) USB-Buchse 3.1 Gen 1
N) USB-Type-C™ Anschluss
O) Kamera
P) Display
Q) Stereo-Lautsprecher
R) Tablet-Dock
S) Status-LED Feststelltaste*
T) Touchpad
U) Fingerabdrucksensor*
V) Status-LED Touchpad*
W) Tastatur-Dock
* Modellabhängige Ausstattungsoption
A) Memory card slot
B) Volume control
C) On/Off switch
D) Audio port
E) USB socket 3.1 Gen 1
F) M.2 SSD extension slot
G) Kickstand
H) Kickstand notches
I) Dual microphone
J) Charging LED
K) DC IN
L) Micro-HDMI® socket
M) USB socket 3.1 Gen 1
N) USB-Type™-C connector
O) Camera
P) Display
Q) Stereo speaker
R) Tablet dock
S) Status LED Caps Lock*
T) Touchpad
U) Fingerprint sensor*
V) Status LED touchpad*
W) Keyboard dock
* Feature option depending on model
A) Geheugenkaartsleuf
B) Volume controle
C) Aan-/Uitschakelaar
D) Audiopoort
E) USB-poort 3.1 Gen 1
F) M.2 SSD-slot
G) Kickstand
H) Kickstand Uitsparingen
I) Dual-Microfoon
J) Oplaad LED
K) DC IN
L) Micro-HDMI®-poort
M) USB-poort 3.1 Gen 1
N) USB-Type™-C-aansluiting
O) Camera
P) Display
Q) Stereo-luidspreker
R) Tabletaansluiting
S) Status-LED Caps Lock*
T) Touchpad
U) Vingerafdruksensor*
V) Status-LED touchpad*
W) Toetsenbordaansluiting
* Ahankelijk van model


Product specificaties

Merk: Trekstor
Categorie: Tablet
Model: PrimeTab T13B

Heb je hulp nodig?

Als je hulp nodig hebt met Trekstor PrimeTab T13B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Tablet Trekstor

Handleiding Tablet

Nieuwste handleidingen voor Tablet