Trek Speed Concept SLR 7 Handleiding

Trek Fiets Speed Concept SLR 7

Lees hieronder de 📖 handleiding in het Nederlandse voor Trek Speed Concept SLR 7 (66 pagina's) in de categorie Fiets. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/66
2022 SPEED CONCEPT
SERVICE MANUAL SUPPLEMENT
2022 Speed Concept SLR/TT
1
Safety
WARNING
Tighten hardware properly
Always tighten hardware to the specied torque.
Over-tightening hardware could deform or break the
hardware or components. Under-tightening hardware
could cause hardware or components to become loose.
Either situation could damage the bicycle and result in
injury to the rider.
WARNING
Re-apply threadlocker
All reused-fasteners with a pre-applied threadlocker
must be cleaned with isopropyl alcohol and have new
threadlocker applied before re-assembly. If a threadlock-
er is not applied, the fasteners may loosen, which could
damage the bicycle and result in injury to the rider.
Legend
Apply grease
Do not apply grease
Apply threadlocker
Nm Torque
ï‚«
ï‚«
ï‚«
ï‚«ï‚«Zip tie
Contents
Brake/shift routing –
Di2
Brake routing – eTap T47 bottom bracket Headset and base bar/
stem
Cockpit – towers
Cockpit – aero bars Cockpit – install the
towers and aero bars
Seat post – SLR Seat post – TT IsoSpeed – SLR
Chainkeeper Accessories – SLR Specications
Copyright 2022 Trek Bicycle Corporation All Rights Reserved
2022 Speed Concept SLR/TT
2
About this manual
The rider must be measured before assembling this bicycle
This bicycle features a customised t and parts specic to the rider’s proportions. Before purchasing this bicycle, you must
have been tted using the online Speed Concept Fit Finder.
Order of assembly
This manual follows an order of assembly starting with a bare frame (e.g. you route the rear brake hose before installing the
bottom bracket). Certain build portions may have been completed already – proceed to the section you need.
Scope of this manual
This manual does not contain detailed instructions for components not produced by Trek, such as shift levers and brake
callipers. Refer to the original manufacturer for more information.
Experienced bicycle mechanics required
These instructions are written for an experienced bicycle mechanic. The high-tech design of this bicycle requires precision and
the proper tools. If you are doing your own maintenance, consult your dealer about any issues.
SLR TT


Product specificaties

Merk: Trek
Categorie: Fiets
Model: Speed Concept SLR 7

Heb je hulp nodig?

Als je hulp nodig hebt met Trek Speed Concept SLR 7 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fiets Trek

Handleiding Fiets

Nieuwste handleidingen voor Fiets