Trek Procaliber 9.6 Handleiding

Trek Fiets Procaliber 9.6

Lees hieronder de 📖 handleiding in het Nederlandse voor Trek Procaliber 9.6 (4 pagina's) in de categorie Fiets. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
2021 PROCALIBER CARBON
SERVICE MANUAL SUPPLEMENT
Table of Contents
Install the IsoSpeed 1
Install the rear derailleur hanger 3
Cable routings 3
Install the guards 4
Headset 4
Bottom Bracket 5
2021 Procaliber Carbon service manual supplement
NOTE This manual has the unique design
features and components for the 2021 Procaliber
carbon bicycle.
2
2021 Procaliber Carbon service manual supplement
7. Install the îž‚rst IsoSpeed bolt in the non-
drive side. Use your îž‚nger to push the sleeve
towards the bolt to begin threading.
NOTE Do not thread more than two
revolutions at this time.
8. Grease the driveside bearing bore.
9. While pushing the bolt and the sleeve towards
the drive side, install the second IsoSpeed
bolt and bearing in the drive side. Thread the
bolt and press the bearing into the sleeve from
the drive side.
10. Use two 5mm wrenches to tighten both bolts.
11. Torque the bolts to 8Nm.


Product specificaties

Merk: Trek
Categorie: Fiets
Model: Procaliber 9.6

Heb je hulp nodig?

Als je hulp nodig hebt met Trek Procaliber 9.6 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Fiets Trek

Handleiding Fiets

Nieuwste handleidingen voor Fiets