Transcend JetDrive 520 Handleiding

Transcend Harde schijf JetDrive 520

Lees hieronder de 📖 handleiding in het Nederlandse voor Transcend JetDrive 520 (11 pagina's) in de categorie Harde schijf. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
1
User’s Manual
Transcend
ÂŽ
JetDrive Firmware Update Utility
Version 1.1
2
Supported Operating Systems
Supported on Mac OS: Mac OS X Lion (10.7) or later, and Mac that is produced after 2010
Note:
You must have Administrator Privileges on your Mac to run this utility.
Before Use
1. Updating your JetDrive
may result in data loss. Therefore, we strongly recommend you
back up your data before proceeding.
2. Please DO NOT unplug the device or the power source during firmware update. This
may cause unpredictable damage.
3. Please DO NOT use the firmware update utility to downgrade the firmware to an older
version
Preparation for Mac OS
 A USB flash drive with minimum 128MB capacity.
 The image file you downloaded from Transcend website.
 Backup your USB data first before you restore image to the USB flash drive. The
restore operation will repartition and format your USB flash drive so the data in it will
be lost.
Getting Started
There are four steps to perform firmware update on Mac OS:
1. Partition and format the USB flash drive
2. Restore image file to the USB flash drive
3. Boot from the USB flash drive
4. Perform Firmware update
3
Partition and format the USB flash drive
1. Launch Disk Utility.
2. Select your USB flash drive and click the Partition tab.
3. Select “MS-DOS(FAT)” as the format and select “1 Partition” as the Partition Layout.


Product specificaties

Merk: Transcend
Categorie: Harde schijf
Model: JetDrive 520

Heb je hulp nodig?

Als je hulp nodig hebt met Transcend JetDrive 520 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden