TP Link VIGI C450 Handleiding

Bekijk gratis de handleiding van TP Link VIGI C450 (2 pagina’s), behorend tot de categorie Bewakingscamera. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.4 sterren uit 8 reviews. Heb je een vraag over TP Link VIGI C450 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

3. Secure the Camera

Route the cable through the side outlet. Insert anchors into the holes,

use screws to ax the camera base, and attach the camera to it.

Appearance

Camera Base

Speaker

7

IR LED

6

White LED

5

Built-in Microphone

1

2

Reset

3

Micro SD Card Slot

Insert a micro SD card for local

storage. Initialize the SD card via

VIGI app before recording videos.

Power Supply Interface

(12V DC) *

9

RJ45 Network Interface

(supports PoE) *

8

4

1

3

2

6

5

4

8

9

3. Secure the Camera

Route the cable through the wall/ceiling. Insert anchors into the holes,

use screws to ax the camera base, and attach the camera to it.

Stick the mounting template to the desired mounting place. Drill

3 screw holes and 1 cable hole according to the template.

1. Drill Holes

2. Open the Camera Case

Align the notch of the camera body with any score on the camera

base, and use a screwdriver to gently pry open the camera case.

Quick Start Guide

Option 1: Cable through the wall/ceiling

Stick the mounting template to the desired mounting place. Drill

3 screw holes according to the template.

1. Drill Holes

2. Open the Camera Case

Align the notch of the camera body with any score on the camera

base, and use a screwdriver to gently pry open the camera case.

Option 2: Cable through the side outlet

1

Wall/Ceiling Mounting

4. Adjust the Surveillance Angle

Adjust the surveillance angle as needed. Make sure the lens is

positioned above the IR LED for normal viewing.

4. Adjust the Surveillance Angle

Adjust the surveillance angle as needed. Make sure the lens is

positioned above the IR LED for normal viewing.

Cable Hole

(For the cable through wall/ceiling)

Score of

camera base

Notch of

camera body

Score of

camera base

Notch of

camera body

Side Outlet

*Images may dier from actual products.

Tilt: 0° to 85°

Pan: 0° to 360°

Rotate: 0° to 360°

Mounting TemplateAnchors & Screws

Network Camera

Quick Start Guide

Quick

Start

Guide

Press for 5 seconds to reset the

camera to factory settings.

7

*

The camera’s standard power supply is 12V DC or PoE (802.3af/at). The power

source should comply with Power Source Class 2 ( PS2) or Limited Power

Source(LPS) of IEC 62368-1

.

Tilt: 0° to 85°

Pan: 0° to 360°

Rotate: 0° to 360°

Product specificaties