TP Link TL-FC1420 Handleiding

Bekijk gratis de handleiding van TP Link TL-FC1420 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 275 mensen en kreeg gemiddeld 4.9 sterren uit 2 reviews. Heb je een vraag over TP Link TL-FC1420 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

14-Slot Rackmount Chassis

Installation Guide

Package Contents: , AC Power Cord, Fourteen Retainer-plates, Installation GuideChassis

Installation

Step 1: Install the Media Converters in the Chassis

Note:

It is recommended to use TP-Link media converters. Other vendors’ products may

be incompatible.

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

If you have any suggestions or needs on the product guides, welcome

to email techwriter@tp-link.com.cn.

To ask questions, find answers, and communicate with TP-Link users or

engineers, please visit https://community.tp-link.com to join TP-Link

Community.

© 2020 TP-Link 7106509020 REV3.2.1

The pictures are for demonstration purposes only. The actual product may dier in appearance from the depicted.

1. Tweak out the two screws on the media converter. Then install the

retainer-plate (provided with the chassis) to the media converter using

the screws removed from the media converter.

2. Remove the front metal plate of the slot on the chassis, then carefully

slide the media converter into the slot and lock it tightly with the

locking knob.

Step 2: (Optional) Install the Redundant Power Supply Module

Step 3: Mount the Chassis on the Rack

Step 4: Power On

Note:

1. The chassis supports EIA standard-sized, 19-inch racks.

2. For security reasons, it is recommended to install the chassis as shown below.

1. Electrically connect the Grounding Terminal on the rear panel of the

chassis to ground via the ground cable.

2. Connect the chassis to the AC outlet using the provided power cord.

Fasten the chassis to the rack with screws through the holes of the

brackets on each side.

Remove the protective cover on the power supply module slot of the chassis.

Then gently push in the module and plug it solidly into the connector.

Grounding Terminal

Chassis

Product specificaties