TP Link TL-ANT2424B Handleiding

TP Link Tv-antenne TL-ANT2424B

Lees hieronder de 📖 handleiding in het Nederlandse voor TP Link TL-ANT2424B (4 pagina's) in de categorie Tv-antenne. Deze handleiding was nuttig voor 27 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4

Installation Guide

24dBi 2.4GHz Grid Parabolic Antenna

TL- ANT2424B

7106506909 REV 2.0.0

Specifications are subject to change without notice. is a

registered trademark of TP Technologies C . Other brands -Link o., Ltd

and product names are trademarks or registered trademarks of their

respective holders.

No part of the specifications may be reproduced in any form or by any

means or used to make any derivative such as translation,

transformation, or adaptation without permission from TP-Link

http://www.tp- link.com

Installation:

1. Assembly the two pieces of reflector symmetrically.

2. Mount the feed horn on the reflector according to the Mounting

diagram. Make sure the feed dipoles parallel with most bars of the

grid reflector. When the feed dipoles and most grid bars are vertical

to the ground, the antenna is vertical polarized. When the feed

dipole and most grid bars are horizontal to the ground, the antenna

is horizontal polarized.

3. Mount the “L” type bracket at the back of the reflector, then mount

the antenna on the mast supplied by customer according to the

Mounting diagram.

4. Test the antenna with equipment to make sure the antenna receive

the best signal by turning the azimuth and pitching angle, then lock

all the screws and seal the connector between antenna and cable.

Product specificaties

Merk:	TP Link
Categorie:	Tv-antenne
Model:	TL-ANT2424B
Gewicht:	3500 g
Breedte:	1000 mm
Diepte:	0 mm
Hoogte:	600 mm
Antenne versterkingsniveau (max):	24 dBi
Impedantie:	50 Ohm
Montage:	Muur
Polarisatie:	Circulaire polarisatie
H-plane (3 dB straalbreedte):	14 °
E-plane (3 dB straalbreedte):	10 °
Voltage Standing Wave Ratio (VSWR):	1.5
Netwerkconnectietype:	802.11b/g