Toshiba RAS-H10BKCV-M Handleiding

Toshiba Airco RAS-H10BKCV-M

Lees hieronder de 📖 handleiding in het Nederlandse voor Toshiba RAS-H10BKCV-M (8 pagina's) in de categorie Airco. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

OWNER’S MANUAL

AIR CONDITIONER (SPLIT TYPE)

For general public use

Indoor unit

RAS-H10, 13, 18BKCV-M

RAS-10, 13, 16, 18BKCV-IN

Outdoor unit

RAS-H10, 13, 18BACV-M

RAS-10, 13, 16, 18BACV-IN

ENGLISH

ESPAÑOL

FRANÇAIS

ENGLISH

BAHASA MALAYSIA

01_1118350205_EN.indd 1

01_1118350205_EN.indd 101_1118350205_EN.indd 1 2/17/2559 BE 17:21

2/17/2559 BE 17:21

2/17/2559 BE 17:212/17/2559 BE 17:21

1Press : Move the louver in

the desired vertical direction.

2Press : Swing the air

automatically and press again to

stop.

3For horizontal direction, adjust

manually.

Note:

● Do not move the louver manually by others.

● The louver may automation positioning by some operation mode.

● Display brightness can be adjusted, follow procedure on . "

AUTOMATIC OPERATION

To automatically select cooling or fan only operation

1. Press : Select A.

2. Press : Set the desired temperature.

3. Press : Select AUTO, LOW , LOW+ , MED ,

MED+ , or HIGH .

1. Press : Select Cool or Fan only .

2. Press : Set the desired temperature.

Cooling: Min. 17°C, Fan Only: No temperature indication

3. Press : Select AUTO, LOW , LOW+ , MED ,

MED+ , or HIGH .

DRY OPERATION

COOLING / FAN ONLY OPERATION

For dehumidi cation, a moderate cooling performance is controlled ﬁ

automatically.

1. Press : Select Dry .

2. Press : Set the desired temperature.

Hi-POWER OPERATION

To automatically control room temperature and air ow for faster cooling ﬂ

(except in DRY and FAN ONLY mode)

Press : Start and stop the operation.

1TIMER (White)

2OPERATION (White)

1Infrared signal emitter

2Start/Stop button

3Mode select button (MODE)

4Temperature button (TEMP)

5Fan speed button (FAN)

6Swing louver button (SWING)

7Set louver button (FIX)

8Off timer button (OFF)

9High power button (Hi-POWER)

!Economy button (ECO)

"Clear button (CLEAR)

#Check button (CHECK)

PRECAUTIONS FOR SAFETY

REMOTE CONTROL

INDOOR UNIT DISPLAY

PREPARATION BEFORE USE

AIRFLOW DIRECTION

Preparing Filters

1. Open the air inlet grille and remove the air lters.ﬁ

2. Attach the lters. (see detail in the accessory sheet).ﬁ

Loading Batteries (when use wireless operation.)

1. Remove the slide cover.

2. Insert 2 new batteries (AAA type) following the (+)

and (–) positions.

Remote Control Reset

1. Remove the batteries.

2. Press .

3. Insert the batteries.

DANGER

●

Do not install, repair, open or remove the cover. It may

expose you to dangerous voltages. Ask the dealer or the

specialist to do this.

●

Turning off the power supply will not prevent potential electric

shock.

●

The appliance shall be installed in accordance with national

wiring regulation.

●

Means for disconnection from the supply having a contact

separation of at least 3 mm in all poles must be incorporated

in the xed wiring.ﬁ

WARNING

●

Do not expose your body directly to cool air for a long time.

●

Do not insert your nger or any article into the air inlet/outlet.ﬁ

●

When an abnormality (burning smell, etc.) occurs, stop the

air conditioner and disconnect the power supply or turn off

the breaker.

●

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

●

Children should be supervised to ensure that they do not play

with the appliance.

●

Do not use any refrigerant different from the one speci ed ﬁ

for complement or replacement. Otherwise, abnormally high

pressure may be generated in the refrigeration cycle, which

may result in a failure or explosion of the product or an injury

to your body.

CAUTION

●

Do not wash the unit with water. It may cause an electric

shock.

●

Do not use this air conditioner for other purposes such as

preserving food, breeding animal, etc.

●

Do not step or put anything on the indoor/outdoor unit. It may

cause an injury or damage the unit.

●

Do not touch aluminium n because it may cause an injury.ﬁ

●

Before cleaning the unit, turn off the main switch or the circuit

breaker.

●

When the unit won’t be used for a long time, turn off the main

switch or the circuit breaker.

●

It is recommended that maintenance be performed by a

specialist when the unit has been operated for a long time.

●

The manufacturer shall not assume any liability for the

damage caused by not observing the description of this

manual.

01_1118350205_EN.indd 2

01_1118350205_EN.indd 201_1118350205_EN.indd 2 2/17/2559 BE 17:21

2/17/2559 BE 17:21

2/17/2559 BE 17:212/17/2559 BE 17:21

ECO OPERATION

To automatically control room to save energy (except in DRY and FAN ONLY

mode)

Press : Start and stop the operation.

Note: Cooling operation; the set temperature will increase automatically 1

degree/hour for 2 hours (maximum 2 degrees increase).

TEMPORARY OPERATION

In case of the misplaced or discharged remote control

● Pressing the RESET button, the unit can start

or stop without using the remote control.

● Operation mode is set on AUTOMATIC

operation, preset temperature is 24°C and fan

operation is automatic speed.

Set the timer when the air conditioner is operating.

Setting the OFF timer

1Press for enter OFF timer setting.

2Press for select desired OFF timer. (0.5 - 12 hrs)

3Press for set OFF timer.

4Press again for cancel OFF timer.

TIMER OPERATION

AUTO RESTART OPERATION

DISPLAY LAMP BRIGHTNESS ADJUSTMENT

To automatically restart the air conditioner after the power failure (Power of

the unit must be on.)

Setting

1. Press and hold the RESET button on the indoor unit for 3 seconds to

set the operation. (3 beep sound and OPERATION lamp blink 5 time/

sec for 5 seconds)

2. Press and hold the RESET button on the indoor unit for 3 seconds to

cancel the operation. (3 beep sound but OPERATION lamp does not

blink)

• In case of ON timer or OFF timer are set, AUTO RESTART

OPERATION does not activate.

To decrease the display lamp brightness or turn it off.

1. Press and hold for 3 seconds until brightness level ( , ,

or ) is shown on remote control LCD then release the button.

2. Press Rise or

Decrease

to adjust brightness in 4 levels.

Remote control

LCD Operation display Brightness

Lamp illuminates full brightness.

100%

Lamp illuminates 50% brightness.

50%

Lamp illuminates 50% brightness and the operation lamp

is turned off.

50%

All lamps are turned off.

All turned off

● In the examples of and , the lamp illuminates for 5 seconds before

going off.

SELF CLEANING OPERATION

(COOL AND DRY OPERATION ONLY)

OPERATION AND PERFORMANCE

1. Three-minute protection feature: To prevent the unit from being

activated for 3 minutes when suddenly restarted or switched to ON.

2. Some minor cracking sound may occur when unit operating. This is

normal because the cracking sound may be caused by expansion/

contraction of plastic.

Air conditioner operating conditions

Temp.

Operation

Outdoor Temperature Room Temperature

Cooling –10°C ~ 46°C 21°C ~ 32°C

Dry –10°C ~ 46°C 17°C ~ 32°C

The unit does not operate. Cooling is abnormally low.

● The power main switch is

turned off.

● The circuit breaker is

activated to cut off the power

supply.

● Stoppage of electric current

● ON timer is set.

● The lters are blocked with dust.ﬁ

● The temperature has been set

improperly.

● The windows or doors are opened.

● The air inlet or outlet of the outdoor

unit is blocked.

● The fan speed is too low.

● The operation mode is FAN or DRY.

TROUBLESHOOTING (CHECK POINT)

REMOTE CONTROL A-B SELECTION

To separate using of remote control for each indoor unit in case of 2 air

conditioner are installed nearly.

Remote Control B Setup.

1. Press RESET button on the indoor unit to turn the air conditioner ON.

2. Point the remote control at the indoor unit.

3. Push and hold button on the Remote Control by the tip of the

pencil. “00” will be shown on the display. (Picture )1

4. Press during pushing . “B” will show on the display

and “00” will disappear and the air conditioner will turn OFF. The

Remote Control B is memorized. (Picture )2

Note: 1. Repeat above step to reset Remote Control to be A.

2. Remote Control A has not “A” display.

3. Default setting of Remote Control from factory is A.

Firstly, turn off the circuit breaker.

Indoor Unit and Remote Control

● Clean the indoor unit and the remote control with a wet cloth when

needed.

● No benzine, thinner, polishing powder or chemically-treated duster.

Air ltersﬁ

Clean every 2 weeks.

1. Open the air inlet grille.

2. Remove the air lters.ﬁ

3. Vacuum or wash and then dry them.

4. Reinstall the air lters and close the air inlet grille.ﬁ

MAINTENANCE

To protect bad smell caused by the humidity in the indoor unit.

1. If the button is pressed once during “Cool” or “Dry” mode,

the fan will continue to run for other 30 minutes, then it will turn off

automatically. This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the more 2 times

within 30 seconds.

01_1118350205_EN.indd 3

01_1118350205_EN.indd 301_1118350205_EN.indd 3 2/17/2559 BE 17:21

2/17/2559 BE 17:21

2/17/2559 BE 17:212/17/2559 BE 17:21

Product specificaties

Merk:	Toshiba
Categorie:	Airco
Model:	RAS-H10BKCV-M
Kleur van het product:	Wit
Soort:	Splitssysteem
Inverter technologie:	Ja
Air conditioner functies:	Cooling, Dehumidifying
Jaarlijks energieverbruik (koelen):	- kWu
Jaarlijks energieverbruik (verwarming) (warmer stookseizoen):	- kWu
Jaarlijks energieverbruik (verwarming) (gemiddelde stookseizoen):	- kWu
Extern geluidsniveau:	63 dB
Intern geluidsniveau (hoge snelheid):	56 dB
Op afstand bedienbaar:	Ja
Verwarmingscapaciteit in watt (opgegeven) (warmer stookseizoen):	- W
Verwarmingscapaciteit in watt (opgegeven) (gemiddelde stookseizoen):	- W
Verwarmingscapaciteit in watt (opgegeven) (kouder stookseizoen):	- W
Energieverbruik per uur (koeling):	- kWu
Energieverbruik per uur (verwarming):	- kWu
Breedte binnenunit:	798 mm
Diepte binnenunit:	230 mm
Hoogte binnenunit:	293 mm
Ontvochtiging capaciteit:	1.5 L/u
Indoor unit type:	Muur-montage
Indoor eenheid gewicht:	9000 g
Jaarlijks energieverbruik (verwarming) (kouder stookseizoen):	- kWu
Ontwerpbelasting (koeling):	- kW
Ontwerpbelasting (verwarming) (warmer stookseizoen):	- kW
Ontwerpbelasting (verwarming) (gemiddelde stookseizoen):	- kW
Ontwerpbelasting (verwarming) (kouder verwarmingsseizoen):	- kW
Outdoor eenheid gewicht:	22000 g
Breedte buitenunit:	660 mm
Diepte buitenunit:	240 mm
Hoogte buiteneenheid:	530 mm
Indoor units hoeveelheid:	1
Outdoor units hoeveelheid:	1
AC-ingangsspanning:	230-240 V