Toshiba F-ASE10MYH Handleiding
Pagina's 2 Niet gecategoriseerd
Bekijk de handleiding van Toshiba F-ASE10MYH gratis online of download de PDF. Deze handleiding is 0 keer bekeken. Vraag over dit model? Stel een vraag
IMPORTANT SAFETY
INSTRUCTIONS
• This appliance is for household use only.
• If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
• To protect against the risk of electrical shock, do
not immerse the unit, cord or plug in water or
other liquid.
• When the appliance is not in use and before
cleaning, unplug the appliance from the outlet.
• When the fan was assembled, the rotor blade
guard shall not be taken off anymore.
- Unplug fan before cleaning.
- The rotor guard shall not be dissembled/
opened to clean the rotor blades.
- Wipe the fan enclosure and rotor blade guard
with a slightly damp cloth.
TROUBLESHOOTING
If the fan appears abnormal during use, please check the following points
before repair.
ProblemCheck the following
The fan blades do
not rotate.
•Are the fan blades installed correctly?
•Is the power plug inserted into the socket correctly?
•Is there a fan blade contact protective cover?
The fan blades rotate
but make a strange
sound.
• Does the spiral hub cap secure the fan blades in place
correctly?
• Are the front and rear guards installed correctly?
• Is there a fan blade contact protective cover?
• Are the fan blades and protective cover clean?
SPECIFICATIONS
ModelF-ASE10MY(H)
Operating voltage220-240V~
Rated power45W
Rated frequency50Hz
Precautions
• Before cleaning this product, be sure to turn o the power switch and
unplug it.
• After cleaning and maintenance, be sure to wait until it is fully dry before
powering on for use or storage.
• Please unplug the power cord when not in use for a long time. It is
recommended to wrap it in the original packaging and store it in a dry
place.
• Do not rinse the machine body directly with water. Use a soft cloth
containing a little neutral detergent to gently wipe the surface of the
machine, and then wipe it dry. Do not use solvents such as gasoline.
• It is prohibited to disassemble the machine for modication. It is
recommended to check and clean the machine regularly to extend its
service life.
OPERATING INSTRUCTIONS
ADJUST AIRFLOW
To adjust the air flow upward or
downward, push the grilles lightly
to the desired direction.
Manual
OSCILLATION CONTROL
To make the fan oscillate, push
down on the oscillation knob
located on the top of the motor
housing. To stop the fan from
oscillating, pull up the oscillating
knob.
Oscillating Knob
Pull-up to stop
Push-down to swing
CONTROL PANEL
The timer is set to "TIMER OFF"
position, and the machine can
run continuously. Turn the knob
of the timer to the desired time
you want, the fan will stop when
the time is over. The longest
time set is 120 minutes.
Speed Control
--- High
--- Medium
--- Low
--- Off
Timer Knob
• Read Rules for Safe Operation and Instructions
Carefully.
• This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning
use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that
they do not play with the appliance.
• Never insert fingers, pencils, or any other object
through the grille when fan is running.
• Disconnect fan when moving from one location
to another.
• Be sure fan is on a stable surface when operating
to avoid overturning.
• Do not use fan in window, rain may create
electrical hazard.
CAUTION
WARNING
CLEANING AND MAINTENANCE
PART NAMEPRODUCT INSTALLATION
LIST OF PARTS
Note:
The pictures in the manual are for
reference only. The actual product in
the packaging box shall prevail.
Rear Grille
Motor Shaft
Piano Switch
Plastic Nut
Spinner
Front Grille
Motor
Housing
Clutch
Knob
Screw
Internal
Pole
Height
Adjustment
Ring
Extension
Pole
Base
Fan Blade
ASSEMBLY INSTRUCTIONS
Before installation, first remove L-shape screw from the pole, remove the grille
lock nut and blade lock nut from the motor shaft, and then install.
1 Base installation
Align the lower pole and the base, and then fasten securely with L-shape
screw.
Note:
Clockwise
2 Pole installation
2.1 Pull out and fix the internal pole (column) after adjusting the height by
way of tightening or loosening the knob.
2.2 Install and fix the machine body by way of tightening or loosening
tighten screw.
Height Adjustment
Turn counterclockwise
and loosen for
performing height
adjustment.
Height
Adjustment
Key
User Manual x1
5.3 Self-clipped installation.
Mesh clip
5.2 Press the grille in order with both hands.
A sound of “click” will be heard when
installed right.
Pa!
A straightly placed Logo
indicates the grille have
been correctly aligned.
1
2
33
2
1
4 Blade installation
Fix the blade on the motor shaft with the blade lock nut.
Press the blade
inwards firmly
Turn
counterclockwise
Fix the blade with
the left hand
Rotate the blade lock nut
counterclockwise with the right
hand
Convex to blade
concave
Tighten
3 Rear grille installation
3.1 Please take out the grille lock nut and blade lock nut from the motor shaft
first. Operation essentials: First fix the motor shaft by hand and then
loosen the blade lock nut clockwise. Then unscrew the lock nut of the grille
counterclockwise.
Fix Rear Grille
Loosen
Tighten
Align bumps on the
front shell of the motor and
water drop hole in the rear grille
3.2 Hang the rear grille on the motor; rotate the grille lock nut clockwise to lock
the rear grille.
5 Installation of Front Grille
5.1 From top to bottom align the clips of the front grille with the uppermost
mesh of the rear grille. After the alignms correct, look from back to
front according to the diagram.
MeshClip
MeshClip
Product specificaties
| Merk: | Toshiba |
| Categorie: | Niet gecategoriseerd |
| Model: | F-ASE10MYH |
Heb je hulp nodig?
Als je hulp nodig hebt met Toshiba F-ASE10MYH stel dan hieronder een vraag en andere gebruikers zullen je antwoorden