Toolland FT101 Handleiding

Toolland Niet gecategoriseerd FT101

Lees hieronder de 📖 handleiding in het Nederlandse voor Toolland FT101 (25 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/25

FT101

BLOW TORCH

GASBRANDER

BRÛLEUR AU GAZ

SOPLETE DE GAS

ANWÄRMBRENNER

LAMPA LUTOWNICZA

MAÇARICO

USER MANUAL 3

GEBRUIKERSHANDLEIDING 6

MODE D’EMPLOI 9

MANUAL DEL USUARIO 12

BEDIENUNGSANLEITUNG 15

INSTRUKCJA OBSŁUGI 18

MANUAL DO UTILIZADOR 21

FT101

V. 03 25/07/2017 2 ©Velleman nv –

FT101

V. 03 25/07/2017 3 ©Velleman nv –

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle could

harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should

be taken to a specialized company for recycling. This device should be returned to your distributor or to

a local recycling service. Respect the local environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Toolland. Please read the manual thoroughly before bringing this device into service. If

the device was damaged in transit, do not install or use it and contact your dealer.

2. Safety Instructions

This device is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the device by a person responsible

for their safety.

Children shall be supervised to ensure that they do not play with the device.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping

liquids. Never put objects filled with liquids on top of or close to the device.

Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to

inflammable products even when they are not in sight. Only use in properly ventilated

rooms.

Incorrect use may cause fire.

Do not touch the shafts, tips, or hot air gun as this can cause serious burns. Keep the tips

and hot air away from the body, clothes, or other flammable material. Do not aim the

device at the eyes. Use gloves and/or heat-resistant tools to pick up the PCB assembly to

prevent burns. Always return the irons and gun to their stands between uses; always let

the device cool down after use and before storage.

Place the device on a level, stable, and fire resistant working surface.

Do not inhale solder fumes. The vapours that are released during soldering are harmful.

Therefore, you shall only use the soldering station in well-ventilated areas or under an

exhaust hood (solder fume extractor). Dispose of fume filters and solder residue in

accordance with local regulations.

Never use the device on live electronic circuits. Make sure power to the work piece is cut

and capacitors are discharged.

Do not block the device nozzle. This may cause heat reflection and may damage the

heating element.

Warning! Do not leave the device unattended when switched on.

 Do not use the device if it is damaged or not working correctly.

 In case of gas delivery problems, check if there is gas in the canister. If so, the problem could be resolved

by cleaning the injector.

 Never put down the tip of the device if the flame is lit (keep the flame 10 cm away from objects).

 Keep the tip of the device turned downwards (max 45°), away from persons and animals.

 Immediately replace the hose if it shows abrasions, deterioration or any imperfection.

 Avoid twisting or overheating the hose.

 Warning! When closing the device, some gas may remain in the extension tube and the flame may keep

burning for a while.

Product specificaties

Merk:	Toolland
Categorie:	Niet gecategoriseerd
Model:	FT101

Heb je hulp nodig?

Als je hulp nodig hebt met Toolland FT101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Toolland

Toolland VL104 Handleiding

15 Augustus 2023

Toolland DT20008N Handleiding

25 Juni 2023

Toolland DTB10000 Handleiding

23 Juni 2023

Toolland AC06 Handleiding

21 Juni 2023

Toolland DT20016N Handleiding

16 Juni 2023

Toolland DTB10001 Handleiding

15 Juni 2023

Toolland PHG2 Handleiding

15 Juni 2023

Toolland WKH3000B Handleiding

8 Juni 2023

Toolland PH340 Handleiding

7 Juni 2023

Toolland VTCOAX Handleiding

7 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024

Fakir Artemis TS 150 Handleiding

26 April 2024

Sony UTX-M03 Handleiding

26 April 2024

Sony URX-P03 Handleiding

26 April 2024

Sony WRU-806B Handleiding

26 April 2024

Sony UTX-B03 Handleiding

26 April 2024

Sony UTX-P03 Handleiding

26 April 2024

Sony ODS-L10 Handleiding

26 April 2024

Sony PDW-U4 Handleiding

26 April 2024

Sony NXL-FR318 Handleiding

26 April 2024