Toa HY-CL10B Handleiding

Bekijk gratis de handleiding van Toa HY-CL10B (1 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 10 mensen en kreeg gemiddeld 4.4 sterren uit 3 reviews. Heb je een vraag over Toa HY-CL10B of wil je andere gebruikers van dit product iets vragen? Stel een vraag

133-01-00121-00

4.2. HY-CL20B

Mount all 4 speakers to the cluster bracket before suspending

them.

If conditions require that the cluster bracket be suspended first,

take scl ce g ay g to t ce peiaardurinssemblowinweighbalan

instability until all 4 speakers have been mounted.

Tip

The wall bracket supplied with each speaker is not used.

Step 1.h the ker t to the r of h of the 4 Attacspeabrackereaeac

sk cpeaerabinets. Use t s shescrewuppliedwihe th t sker. pea

(HY-CL10B: 2 x 4HYpieces; -CL20B: 4 pieces x 4)

Note

Mount the bracket so that the speaker is suspended in a

vertical orientation.

Step 2.Attach a joint bracket (4 brackets in total) to each of the 4

cluster bracket sections using the 16 screws supplied with

the cluster bracket.

Note

Before starting the work, ensure that all the screws used

for assembling the cluster bracket are firmly tightened.

Step 3.Mount the 4 speakers to the joint brackets.

Insert the speaker bracket into the joint bracket and put the

fixing bolt through the joint bracket.

Adjust each speaker's vertical orientation, then tighten the

fixing bolt.

The speaker angle can be adjusted in 7.5º steps within the

range as follows.

F-1000/2000 series: 15º to 45º downward

F-1300 series: 15º to 30º downward

Step 4.Lift the speaker cluster up to the installation position using

a suspension wire.

Step 5.ct e sker s to e r t Connethpeacablethspeakeinpu

terminals. For connections, refer to the instruction manual

enclosed with the speaker.

INSTALLATION MANUAL

CLUSTER BRACKETHY-CL10B

HY-CL20B

•re n or , be re to ry ad l e Befoinstallatiousesucaefullrealth

instructions in this section for correct and safe operation.

•Be sure to follow all the

precautionary instructions in this section,

whionaiimporanwarningandauionregardinch ctn tt s /or cts g

safety.

•After reading, keep this manual handy for future reference.

1. SAFETY PRECAUTIONS

Indicatepotentiallhazadousituatiowhis a y rs n ch, if

mishandled, could result in death or serious personal injury.

WARNING

•Refer all installation work to the dealer from whom the speaker

was purchased. Installation for flying requires extensive technical

knowledge and experience. The speaker may fall off if incorrectly

installed, resulting in possible personal injury.

•Flying Precautions

Be e to fw the ts w. se, the surolloinsruionctbeloOtherwi

supensiowirebelmanaanpeasn s or ts y be off or sp d the sker

may fall off, causing personal injury.

· Checonirhauspensiowireanbelark to cfm tt the sn s d ts e

strong enough to withstand the load.

· The cs of the sn s d ts st be onneorctsupensiowireanbelmu

securely linked with those of the load.

•Install the unit only in a location that can structurally support the

weight of the unit and the speaker. Doing otherwise may result in

the sr fg n d g l iy /or peakeallindowancausinpersonanjurand

property damage.

•Sce the t is sd for r use, do t l it inunideigneindoonoinalst

outdoors. I

f d rs, e g of rts s e installeoutdoothaginpacauseth

speaker to fall off, resulting in personal injury.

•Owing to the speaker's size and weight, be sure that at least two

personaravailablinsaluniailurcouls e e to tl the t. Fe to do so d

result in personal injury.

•Do t e r s n fd to t e t. nousothemethodthaspeciiemounthuni

Extreme force is applied to the unit and the speaker could fall off,

possibly resulting in personal injuries.

•Use nuts and bolts that are appropriate for the ceiling's structure

and composition. Failure to do so may cause the speaker to fall,

resulting in material damage and possible personal injury.

•Tighten each nut and bolt securely. Ensure that the unit has no

loe jots ar itlaon to nt accis at ld osinftensaltiprevedentthcou

result in personal injury.

•Use the specified speaker in combination. Doing otherwise may

cause the speaker to fall off, resulting in personal injury.

•Do not mount the unit in locations exposed to constant vibration.

Thunicadamageceibrationpotentialle t n be d by exssive v, y

causing the speaker to fall, which could result in personal injury.

•Do not use anti-rust lubricant. If it

contacts resin or rubber parts,

ty d tte d e the t to f, sy hecouldeerioraancausuniallposibl

resulting in personal injury.

Indicatepotentiallhazadousituatiowhis a y rs n ch, if

mihandledoulresulmoderaminopersonas, cd t in te or r l

injury, and/or property damage.

CAUTION

•Avoid touching the unit's sharp metal edge to prevent injury.

•Do not stand or sit on, nor hang down from the unit as this may

cause it to fall down or drop, resulting in personal injury and/or

property damage.

•Have the unit checked periodically by the shop from where it was

purchased. Failure to do so may result in corrosion or damage to

the t tt d se the t to f, sy csg unihacoulcauuniallposiblauin

personal injury.

The HYB ter -CL10Clus

Brackeallowtotat s a l of 4

F/0 Ss sker -1000130eriepea

syemuspendests to be sd

froceilininglm a g in a se

multi-directional cluster.

The HYB ter -CL20Clus

Braet is used r csr ckfolute

ceilinsuspensiog n of 4

F-2000 Series speakers.

2. GENERAL DESCRIPTION

[Finished assembling diagram]

4. SPECIFICATIONS

Note:The design and specifications are subject to change without

notice for improvement.

4.1. HY-CL10B

5. INSTALLATION

30°

30°

15°

Speaker bracket

[F-1000/2000 series: 15° to 45° downward]

[F-1300 series: 15° to 30° downward]

Joint bracket

45°

30°

30°

15°

Refer to the figures below for the positional relationship

between the speaker bracket's "groove" and the joint

bracket's "indentation."

Note

The mating surfaces of the speaker bracket and joint

bracket are designed to interlock.

Ensure that both parts are securely engaged with each

other after mounting is complete.

3

3

1

1

Fixing bolt

(supplied with the speaker)

Fixing bolt

(supplied with the speaker)

Speaker system

F-2000 series

Speaker system

F-1000 series

Speaker bracket

(supplied with the speaker)

Speaker bracket

(supplied with the speaker)

Screw M5 x 20

(supplied with the speaker)

Screw M5 x 20

(supplied with the speaker)

2

2

• HY-CL20B

• HY-CL10B

Joint bracket (supplied with the speaker)

Joint bracket (supplied with the speaker)

Accessory screw M5 x 10

Accessory screw M5 x 10

4

Suspension wire

Note

Use the outer 4 holes

for wire connections.

4

Suspension wire

Note

Use the outer 4 holes

for wire connections.

Cluster bracket HY-CL10B

Cluster bracket HY-CL20B

The figure at left

shows the screw

mounting positions

for the F-1300

series.

URL: http://w.a.jp/wwto

Applicle Speakerab

F-2000B, F-2000BT, F-2000W, F-2000WT

FilanishSteel plate, bck, paint

Dimensions

904 (w) x 395 (h) x 904 (d) mm

(Maximum dimensis when the installed on

4 speakers face 37.5° downward)

Weight

27.4 kg (When 4 F-20Bs0Ws are00/200

clusted)er

30 kg (When 4 F-20BTs0WTs are00/200

clusted)er

Accessories

Machine screw M5 x 10 with washers … 16

Applicle Speakerab

F-1000B, F-1000BT, F-1000W, F-1000WT,

F-1300B, F-1300BT, F-1300W, F-1300WT

FilanishSteel plate, bck, paint

Dimensions

492 (w) x 214 (h) x 492 (d) mm

(Maximum dimensions when the installed 4

F-1000 sees speakers face 30downward)ri°

568 (w) x 263 (h) x 568 (d) mm

(Maximum dimensions when the installed 4

F-1300 seriespeakers face 30downward)s °

Weight

7.3 kg (When 4 F-100000Bs/10Ws are

clusted)er

8.1 kg (When 4 F-10BTs/10WTs are0000

clusted)er

12.5 kg (When 4 F-1300Bs/1300Ws are

clusted)er

14.3 kg (When 4 F-1300BTs/1300WTs are

clusted)er

Accessories

Machine screw M5 x 10 with whers … 16as

Product specificaties