Toa BS-678BSB Handleiding

Toa Speaker BS-678BSB

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa BS-678BSB (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

WALL MOUNT SPEAKERS BS-678BSB

BS-678BSW

Thank you for purchasing TOA's Wall Mount Speaker.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,

Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg,

Germany

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS ........................... 1

2. GENERAL DESCRIPTION

AND FEATURES ......................................... 2

3. INSTALLATION .......................................... 2

4. DIMENSIONAL DIAGRAM ......................... 4

5. WIRING DIAGRAM ..................................... 4

6. FREQUENCY RESPONSE ......................... 5

7. SPECIFICATIONS ...................................... 5

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

When Installing the Unit

• Refer all installation work to the dealer from whom

the speaker was purchased. Installation work

requires extensive technical knowledge and

experience. The speaker may fall off if incorrectly

installed, resulting in possible personal injury.

• Install the speaker only in a location that can

structurally support the full weight of the unit and

mounting bracket. Doing otherwise may result in

the speaker falling down and causing personal

injury and/or property damage.

• Since the unit is designed for in-door use, do not

install it outdoors. If installed outdoors, the aging of

parts causes the unit to fall off, resulting in personal

injury. Also, when it gets wet with rain, there is a

danger of electric shock.

• Do not use other methods than specified to install

the speaker. Extreme force is applied to the

speaker and the speaker could fall off, possibly

resulting in personal injuries.

• Use screws that are appropriate for the wall's

material and structure. Failure to do so may cause

the speaker to fall, resulting in material damage

and possible personal injury.

• Ensure that all screws are securely tightened. If

they are loose after installation, the speaker could

fall down, possibly resulting in personal injury.

• Do not mount the speaker in locations exposed to

constant vibration. The speaker or its mounts can

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

WARNING

2. GENERAL DESCRIPTION AND FEATURES

The BS-678BSB and BS-678BSW are certified according to the European Standard EN 54-24: 2008, the

International Standard ISO 7240-24: 2010 and compliant with the British Standard BS 5839-8: 2008 14-8.

• The BS-678BSB and BS-678BSW, of which cabinet is made of wood, can be installed in a vertical or

horizontal orientation.

• Either concealed in-wall wiring or open wiring can be used for speaker cable connection.

• The speaker structure that permits direct wall-mounting with screws prevents the speaker from falling easily

even if an outward force is applied to.

• The input impedance can be easily changed by changing the tap position of the transformer.

• A 6.5-inch cone speaker unit delivers high quality sound.

• Two screw terminals (steatite) make cable connections easy and allow bridge wiring.

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

CAUTION

Baffle

Cabinet

Baffle

V-shaped spring

Squeeze the spring to detach

from the cabinet.

Cabinet

3. INSTALLATION

Step 1. Pull out the baffle, and unlatch 2 V-shaped

springs to detach the baffle from the cabinet.

be damaged by excessive vibration, potentially

causing the speaker to fall, which could result in

personal injury.

• Do not use anti-rust lubricant. If it contacts resin or

rubber parts, they could deteriorate and cause the

speaker to fall, possibly resulting in personal injury.

• Do not install the speaker in indoor swimming pools

or such locations where liquid chemicals are used.

The parts deteriorate if corroded, causing the

speaker to fall, which could result in personal

injury.

When the Unit is in Use

• If any of the following irregularities occurs,

immediately switch off the amplifier's power, and

inform the shop from where the speaker was

purchased. Further using the speaker may result in

fire or electric shock.

· If you detect smoke or a strange smell coming

from the speaker

· If water or any metallic object gets into the

speaker

· If the speaker falls, or the speaker case breaks

• To prevent a fire or electric shock, never open nor

remove the speaker case. Refer all servicing to

your nearest TOA dealer.

When Installing the Unit

• Avoid touching the speaker's sharp metal edge to

prevent injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

When the Unit is in Use

• Do not operate the speaker for an extended period

of time with the sound distorting. Doing so may

cause the speaker to heat, resulting in a fire.

• Do not stand or sit on, nor hang down from the

speaker as this may cause it to fall down or drop,

resulting in personal injury and/or property

damage.

• Have the speaker checked periodically by the shop

from where it was purchased. Failure to do so may

result in corrosion or damage to the speaker or the

mounts that could cause it to fall, possibly causing

personal injury.

From the

amplifier

To the next

speaker

COM

5 mm (0.2")

HOT

Earth

COM

HOT

Earth

Screw terminal

Notches for open wiring

Screws for

horizontal mounting

Screws for

vertical mounting Tapping screws 4 x 35 (accessory)

Cabinet

Screw terminal

Step 2. Install the cabinet to the wall using the supplied tapping screws 4 x 35. In this case, route the cables

from a cable entry hole.

Notes

• If the supplied tapping screws are not appropriate for the construction of wall, separately prepare

the appropriate screws.

• The speaker can be installed in a vertical or horizontal orientation. Either concealed in-wall wiring or

open wiring is available for speaker cable connection.

[Cabinet mounting dimensions]

3-ø5 (0.2)

Unit: mm (in)

Cabinet outside

dimensions

83.5

(3.29)

250 (9.84)

83.5

(3.29)

190 (7.48)

Cable entry hole

(for open wiring at horizontal mounting)

Cable entry hole

(for concealed wiring at horizontal mounting)

Cable entry hole

(for concealed and open wirings at vertical mounting)

Step 3. Make wiring.

3-1. Insert the lead-in cables (cables from the amplifier) and lead-out cables (cables to other speakers)

into the screw terminals attached to the cabinet.

3-2. Insert the fasten s fitted at the ends of the

HOT and COM cables from the screw

terminals on the cabinet into the taps of the

matching transformer on the speaker unit.

Connect the COM cable to the transformer's

COM tap, and the HOT cable to the desired

transformer's input tap (Refer to the figure at

right.)

The table at right shows the relationship

between impedance and input power.

3.3kΩ

1.7kΩ

COM

6.7kΩ

13kΩ

HOT (black)

COM (white)

Matching transformer

Impedance 1.7 kΩ Ω Ω3.3 k 6.7 k 13 kΩ

100 V line 6 W 3 W 1.5 W 0.8 W

70 V line 3 W 1.5 W 0.8 W 0.4 W

Product specificaties

Merk:	Toa
Categorie:	Speaker
Model:	BS-678BSB
Kleur van het product:	Zwart
Gewicht:	1700 g
Breedte:	250 mm
Diepte:	110 mm
Hoogte:	190 mm
Gemiddeld vermogen:	- W
Aantal per verpakking:	1 stuk(s)
Aantal:	1
Speaker plaatsing:	Muur-montage
Diameter driver:	160 mm
Frequentiebereik:	150 - 18000 Hz
Gevoeligheid:	94 dB
Bedrijfstemperatuur (T-T):	-10 - 50 °C
Geluidsdruk niveau (max):	98 dB