Toa BS-1034EN Handleiding

Toa Speaker BS-1034EN

Lees hieronder de 📖 handleiding in het Nederlandse voor Toa BS-1034EN (8 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8

Thank you for purchasing TOA's Wall Mount Speaker.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

BS-1034ENWALL MOUNT SPEAKER

INSTRUCTION MANUAL

1. SAFETY PRECAUTIONS

• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe

operation.

• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or

cautions regarding safety.

• After reading, keep this manual handy for future reference.

When Installing the Unit

• Refer all installation work to the dealer from whom

the speaker was purchased. Installation work

requires extensive technical knowledge and

experience. The speaker may fall off if incorrectly

installed, resulting in possible personal injury.

• Install the speaker only in a location that can

structurally support the full weight of the unit and

mounting bracket. Doing otherwise may result in

the speaker falling down and causing personal

injury and/or property damage.

• When installing the speaker in the snowy area,

take appropriate measures to prevent snow from

lying on the speaker. If the snow lies on it, the

speaker may fall, causing personal injuries.

• Do not use other methods than specified to install

the speaker. Extreme force is applied to the

speaker and the speaker could fall off, possibly

resulting in personal injuries.

• Use screws that are appropriate for the wall's

material and structure. Failure to do so may cause

the speaker to fall, resulting in material damage

and possible personal injury.

• Ensure that all screws are securely tightened. If

they are loose after installation, the speaker could

fall down, possibly resulting in personal injury.

• Do not mount the speaker in locations exposed to

constant vibration. The speaker or its mounts can

be damaged by excessive vibration, potentially

causing the speaker to fall, which could result in

personal injury.

WARNING

Indicates a potentially hazardous situation which,

if mishandled, could result in death or serious

personal injury.

1. SAFETY PRECAUTIONS ........................... 1

2. GENERAL DESCRIPTION

AND FEATURES ......................................... 2

3. CONNECTION ............................................ 2

4. INSTALLATION .......................................... 3

5. DETACHING THE SPEAKER .................... 4

6. DIMENSIONAL DIAGRAM ......................... 4

7. WIRING DIAGRAM ..................................... 5

8. FREQUENCY RESPONSE ......................... 5

9. SPECIFICATIONS ...................................... 5

TABLE OF CONTENTS

Traceability Information for Europe

Manufacturer:

TOA Corporation

7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,

Japan

Authorized representative:

TOA Electronics Europe GmbH

Suederstrasse 282, 20537 Hamburg,

Germany

• Do not use anti-rust lubricant. If it contacts resin or

rubber parts, they could deteriorate and cause the

speaker to fall, possibly resulting in personal injury.

• Avoid installing the speaker near seaside or in

locations exposed to corrosive gas. The speaker or

its parts may be subject to corrosion, which might

cause it to fall or result in personal injury.

• Do not install the speaker in indoor swimming pools

or such locations where liquid chemicals are used.

The parts deteriorate if corroded, causing the

speaker to fall, which could result in personal

injury.

When the Unit is in Use

• If any of the following irregularities occurs,

immediately switch off the amplifier's power, and

inform the shop from where the speaker was

purchased. Further using the speaker may result in

fire or electric shock.

· If you detect smoke or a strange smell coming

from the speaker

· If water or any metallic object gets into the

speaker

· If the speaker falls, or the speaker case breaks

• To prevent a fire or electric shock, never open nor

remove the speaker case. Refer all servicing to

your nearest TOA dealer.

When Installing the Unit

• Avoid touching the speaker's sharp metal edge to

prevent injury.

• To avoid electric shocks, be sure to switch off the

amplifier's power when connecting speakers.

When the Unit is in Use

• Do not operate the speaker for an extended period

of time with the sound distorting. Doing so may

cause the speaker to heat, resulting in a fire.

• Do not stand or sit on, nor hang down from the

speaker as this may cause it to fall down or drop,

resulting in personal injury and/or property

damage.

• Have the speaker checked periodically by the shop

from where it was purchased. Failure to do so may

result in corrosion or damage to the speaker or the

mounts that could cause it to fall, possibly causing

personal injury. Do not stand or sit on, nor hang

down from the speaker as this may cause it to fall

down or drop, resulting in personal injury and/or

property damage.

CAUTION

Indicates a potentially hazardous situation which,

if mishandled, could result in moderate or minor

personal injury, and/or property damage.

2. GENERAL DESCRIPTION AND FEATURES

The BS-1034EN is certified according to the European Standard EN 54-24: 2008 and the International

Standard ISO 7240-24: 2010.

• BS-1034EN of which cabinet is made of HIPS resin, can be installed in a vertical or horizontal orientation.

• Thin type wall mount speaker with 5" cone speaker unit

• Two-way speaker system employing a balanced dome tweeter and elliptical horn for high-frequency sound

reproduction in combination with a 5" cone speaker unit ensures high-quality sound.

• The speaker's smoothly curved surface in combination with its straight lines permits it to blend in with

virtually all modern buildings.

• Equipped with a speaker receptacle, providing speaker cable connection and installation ease.

• Equipped with a lock mechanism, preventing the speaker from being detached easily after installation.

• In-wall wiring, exposed wiring, or bridge wiring available for speaker cable connection

• The input power (impedance) can be easily changed by the rear-mounted rotary switch.

TERMINAL

(HOT)

(COM)

C R

HOT COM

HOT (N)

COM (C)

Speaker receptacle

(Rear)

Terminal block

with thermal fuse

To the speaker

From the

amplifier

To other

speaker

HOT

COM

3. CONNECTION

Connect the speaker cable to the supplied

speaker receptacle.

Notes

• Use the supplied terminal block only when

wirings are concealed in the wall or a terminal

box is installed for wirings.

• The supplied terminal block is equipped with a

thermal fuse and fiberglass tube. For safety

purposes, connect the terminal block between

the speaker cable and the speaker receptacle

as shown at right.

Obstacle

Wall

170 mm (6.69") or more

250 mm (9.84") or more

Tapping screw 4 x 35

(accessory)

Notes on speaker receptacle mounting

70 (2.76)

"UP" mark

120 (4.72)

66.7

(2.63)

83.5

(3.29)

If the supplied tapping screws are not appropriate for the

construction of wall, separately prepare the appropriate screws.

Install the speaker receptacle referring to its "UP" mark.

Position the receptacle at the specified distance away from any

object above and below it for vertical speaker mounting. Keep

the same distance to the right and left of the receptacle

(positioned sideways) for horizontal speaker mounting.

•

Unit: mm (in)

4. INSTALLATION

Step 1. Attach the speaker receptacle to a wall.

[Notes on horizontal speaker mounting]

• Even if the speaker receptacle is mounted

horizontally, the speaker may be tilted due to its

weight unbalance when attached to the receptacle.

• When changing the logo direction, peel off the logo

carefully as it is affixed using double-faced tape.

Then, re-affix it in the right orientation.

[Exposed wiring]

Notch the top of the speaker receptacle using long-

nose pliers, then make connections.

Speaker cable

Split the speaker cable into 2 branches just before it

enters the speaker receptacle so that it can be routed in

the cable-guide groove on the rear side of the speaker.

Speaker receptacle

Speaker (Rear)

Notch the top of the

speaker receptacle

using long-nose pliers.

Impedance 500 10 kΩ1 kΩ2 k 3.3 kΩ Ω Ω

100 V line Never use this. 5 W 3 W 1 W10 W

70 V line 10 W 5 W 2.5 W 1.5 W 0.5 W

Step 2. Change the input power (impedance) as needed.

The input power (impedance) is factory-preset to

1 k for 10 W/100 V line or 5 W/70 V line.Ω

When changing this setting, use a standard

screwdriver to turn the rotary switch on the

speaker's rear panel to the desired position.

Note

Be sure to follow the instructions below. Failure

to do so may cause damage to the speaker as

excessive input power is applied to it.

· Switch off the amplifier's power when changing

the input power.

· Never make 500 connection in a 100 V lineΩ

system, as excessive input power is applied to

the speaker, possibly resulting in damage.

Step 3. Hold and slide the speaker to insert its speaker

plug into the speaker receptacle.

Note

In this case, force the speaker onto the speaker

receptacle holding the speaker outer frame.

10W

3W 1.5W

0.5W

2.5W

10W

3.3kΩ

10kΩ

2kΩ

1kΩ

500Ω

OFF

100V

LINE

70V

LINE IMP.

Speaker (Rear)

Rotary switch

Speaker receptacle

Speaker (Rear)

Speaker plug

Bold figures represent factory-preset values.

Product specificaties

Merk:	Toa
Categorie:	Speaker
Model:	BS-1034EN
Kleur van het product:	Wit
Gewicht:	1400 g
Breedte:	210 mm
Diepte:	80 mm
Hoogte:	330 mm
Bluetooth:	Nee
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	10 W
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Intercomsysteem
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Muur-montage
Frequentiebereik:	120 - 20000 Hz
Gevoeligheid:	89 dB
Montagebeugels meegeleverd:	Ja
Bedrijfstemperatuur (T-T):	-10 - 50 °C