TK Audio M/S Blender 500 Handleiding

Bekijk gratis de handleiding van TK Audio M/S Blender 500 (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 4 mensen. Heb je een vraag over TK Audio M/S Blender 500 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

M/S Blender 500

Universal parallel processing tool

www.tkaudio.se

The M/S Blender 500 is a multi functional parallel processing tool. A dual mono blender,

a stereo blender and a M/S encoder/decoder. In standard mode the unit acts like two individual

mono blenders. If you activate the link function the left blend knob will control both channels for

easier blend of stereo signals. In M/S mode the left/right sends will be encoded into mid/side

sends and the returns will be decoded back to left/right before the blend control(s).

A cue function is also provided so that you can monitor the left, right, mid or side signal (to cue

the mid or side signal the M/S function need to be activated.) The cued signal will be sent to

both main outputs.

Parallel processing can help you get more energy on tracks like bass, vocal and guitars by

blending in compression. It can also give you more punch in a mix by blending in a compressed

signal. With parallel compression you will keep the transients from the direct signal while you

blend in compressed signal for more energy. It’s also very useful for blending in signals from

distortion, saturation and overdrive units.

The M/S Blender 500 can also be used as a M/S encoder/decoder for the inserted processor(s),

you don’t need to use stereo units for M/S processing, you can use separate units for mid and

side processing.

When you work in M/S mode the mid and side signal will be processed separately which can

help you get a more focused mid, adding some air to the sides at the same time. By altering the

side signal level you can control the width of the mix.

Product specificaties