Thule 821 Low Rider Handleiding

Bekijk gratis de handleiding van Thule 821 Low Rider (3 pagina’s), behorend tot de categorie Robot porszívó. Deze gids werd als nuttig beoordeeld door 67 mensen en kreeg gemiddeld 4.3 sterren uit 7 reviews. Heb je een vraag over Thule 821 Low Rider of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Test security by tugging at forks. If forks can move out

of the skewer, open lever and tighten the nut slightly.

Close lever again with firm pressure. Repeat if necessary.

Drill 4 places using 5/16" or 8mm drill bit

When printing from Acrobat Reader, please

make sure that “Page Scaling” is selected

to “None”.

NOTE:If you do not select “None” in

the “Page Scaling” option, the

drillling template will not be to

actual size.

Low Rider attaches securely

to flat surfaces.

Recommended Mounting

Hardware 1/4" or (6mm)

bolts or screws, fender

washers, and locking nuts.

821 LOW RIDER

T

H

U

L

E

F

O

R

Y

O

U

R

T

R

U

C

K

T

H

U

L

E

F

O

R

Y

O

U

R

T

R

U

C

K

T

H

U

L

E

F

O

R

Y

O

U

R

T

R

U

C

K

T

H

U

L

E

F

O

R

Y

O

U

R

T

R

U

C

K

1

DRILLING TEMPLATE - ACTUAL SIZE OF TEMPLATE SHOULD BE 3 15/16" x 2 1/4"

Use the template below to scribe four

drilling points.

•5/16" (8mm) drill bit recommended.

•Always check handlebar

clearance before attaching

block.

2

•Align block with drilled holes.

•Tighten hardware securely.

Test installation by pulling

and shaking block.

3

•With lever open, tighten nut

until the lever closes with

some resistance.

•Loosen or tighten the nut as

needed so that lever closes

with some resistance.

5

•Set the bicycle forks onto the skewer.

4

501-5329-031 of 3

Product specificaties