Thrustmaster T-Wireless 3in1 Rumble Force (PC) Handleiding

Thrustmaster Niet gecategoriseerd T-Wireless 3in1 Rumble Force (PC)

Lees hieronder de 📖 handleiding in het Nederlandse voor Thrustmaster T-Wireless 3in1 Rumble Force (PC) (50 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/50
PODR CZNIK U YTKOWNIKAĘ Ż
1/6
Compatible: PC / PlayStation® 3 / PlayStation® 2
User Manual
TECHNICAL FEATURES
1. 2 vibration motors
(for PlayStation® 2)
2. 8 action buttons
3. SELECT and START buttons
4. 2 analog mini-sticks / 2 digital action buttons
5. D-Pad
6. MAPPING button (for programming)
7. HOME button for PlayStation® 3
and Analog/Digital for PlayStation® 1 and 2
8. Gamepad CONNECT button
9. PS2 Gameport connector on
Wireless receiver
10. USB PC and PS3 connector on
Wireless receiver
11. Gamepad LED
12. Receiver CONNECT button
(with LED)
13. POWER and MOTORS switches
14. Battery compartment
2/6
INSTALLING BATTERIES
Insert 3 1.5V type LR03 / AAA batteries in the battery compartment located at the back of the gamepad (14).
OVERVIEW
POWER switch (13):
- OFF position = the gamepad is off (and doesn’t use up batteries).
- ON position = the gamepad is on.
MOTORS switch (13):
- OFF position = vibration mode is disabled (uses less battery power).
- ON position = vibration mode is enabled (uses more battery power).
CONNECT buttons (8 and 12)
The connection between the gamepad and the receiver is established automatically.
These 2 buttons allow you to establish a connection in case of failure or when using more than one T-
Wireless gamepad at the same time.
- Both LEDs are on = signal between the gamepad and the receiver.
- Both LEDs flash quickly = no signal between the gamepad and the receiver.
- Both LEDs are off = the gamepad is in standby mode or switched off.
- Both LEDs flash slowly = change batteries.
STANDBY MODE:
- The gamepad switches off automatically after 5 minutes of inactivity.
- To reactivate it, press the START button.
PLAYSTATION® 2
INSTALLATION ON PLAYSTATION® 2
1. Connect the receiver’s PS2 Gameport connector (9) to port number 1 on your console.
2. Switch on your console.
3. Switch on your gamepad using the POWER ON switch (13).
4. Start up your game.
You are now ready to play!
ATTENTION: NEVER CONNECT THE USB CABLE (10) TO YOUR PLAYSTATION® 2
(to avoid the risk of damaging your gamepad or your console)


Product specificaties

Merk: Thrustmaster
Categorie: Niet gecategoriseerd
Model: T-Wireless 3in1 Rumble Force (PC)

Heb je hulp nodig?

Als je hulp nodig hebt met Thrustmaster T-Wireless 3in1 Rumble Force (PC) stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Thrustmaster

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd