Thermaltake Dr. Power III Pro Handleiding

Bekijk gratis de handleiding van Thermaltake Dr. Power III Pro (2 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 3 mensen en kreeg gemiddeld 4.7 sterren uit 2 reviews. Heb je een vraag over Thermaltake Dr. Power III Pro of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Dr. Power III Pro

User Manual

24pin connector

Check button

CPU 4pin or 8pin connector

Peripheral connector

SATA connector

PCI-E 6pin or 8pin connector

12+4pin connector

Connector Introduction

Operation Instructions

Manual Mode

1. Plug the PSU connectors into Dr. Power III Pro.

2Switch the PSU I/O switch to the “-” position. The screen will then display the TT logo animation..

3The screen will display the icons of the connectors that have been plugged into Dr. Power III Pro..

4Press the CHECK button to start the manual testing mode. The screen will display the 24P icon, the output voltage of .

each group, and PG.

5Press the CHECK button again. The system will proceed with the next test point CPU. The screen will display the CPU icon .

and the corresponding voltage output.

6Press the CHECK button again. The system will proceed with the next test point PCI-E. The screen will display the PCI-E icon .

and the corresponding voltage output. If the PCI-E 12+4pin is connected, the screen will display the SENSE0/SENSE1

sideband signals of the PCI-E 12+4pin connector (150W/300W/450W/600W).

7Press the CHECK button again. The system will proceed with the next test point MOX. The screen will display the MOX icon .

and the corresponding voltage output.

8Press the CHECK button again. The system will proceed with the next test point SATA. The screen will display the SATA icon .

and the corresponding voltage output.

9Press the CHECK button again to return to step 3..

10Once any fault occurs, a red warning icon will be displayed along with a beep sound..

Connect all of the

connectors and

turn on the PSU

Press buttonPress button

Press button

Press button

Press button

Press button

Note: 12+4P will only be displayed when

PCI-E 12+4pin is connected.

SATA

SATA

Product specificaties