Theater Solutions CS8C Handleiding

Bekijk gratis de handleiding van Theater Solutions CS8C (4 pagina’s), behorend tot de categorie Speaker. Deze gids werd als nuttig beoordeeld door 40 mensen en kreeg gemiddeld 4.8 sterren uit 3 reviews. Heb je een vraag over Theater Solutions CS8C of wil je andere gebruikers van dit product iets vragen? Stel een vraag

To obtain the full potential of your new speaker, please read all

instructions before starting the installation.

PARTS LIST

Each speaker package includes the following items:Reference Series

() speaker with grille2Theater Solutions Reference Seriesss

(1) Hole cut out and paint mask template

(1) Grille removal tool

(1) Adhesive to secure the grille

SPEAKER LOCATION GUIDE

To achieve the best performance from your Theater Solutions

Speakers, it is important to carefully select the location for installation.

INTRODUCTION

Congratulations on the purchase of your Theater SolutionsReference

Series In-Ceiling Speaker System. Th speaker wmanufacturedesesere

with high quality components and engineered to accurately reproduce

including today'ssound tracks from both music and video sources,

demanding digital signals. Mounted flush ,to a wall or ceiling

architectural speaker is ideal for many applications where traditional

speakers impractical or impossible.would beThey are especially

suited for distributing sound throughout a house and can be used to

enhance surround sound systems. When properly installed, this

product will provide you with years of entertainment pleasure.

REFERENCE SERIES

In-Ceiling Speaker System

Instruction Booklet

TROUBLESHOOTING

Should your speakers not work properly, check the following:

If there is no sound from either speaker:

.Confirm that the receiver/amplifier is on and an active source is

selected and playing.

.Most receivers have an A/B speaker selector switch. Confirm

which output the speakers are connected to (A or B) and make

sure this is selected.

.Check all wiring and connections between the receiver/amplifier

and the speakers. Make sure all wires are connected. Make sure

none of the speaker wires are frayed, cut or punctured.

If the receiver cuts on and off:

.This could be caused by a short circuit between the positive and

negative output leads. Check the connections at the back of the

eceiver/amplifier and then at the speaker. Make sure that no

strands of wire from one connector are touching the other connector.

If there is low or weak bass:

.Check the polarity of the speaker wiring. All speakers must be "n i

Phase"with each other or bass performance will be compromised.

.Many modern receivers can be configured to drive a subwoofer

directly. In this mode, bass energy is routed to the subwoofer only.

If you do not have a subwoofer, make sure the receiver is not

configured for a subwoofer.

Onlyfactorydirect 6433 Topanga Cyn. Blvd, Suite 175, Canoga Park,CA 91363

customerservice@onlyfactorydirect.com

r

grilles are attached. Always paint the frame and grille separately. Use

the Paint Masking Template to cover the woofer/tweeter assembly to

prevent damage to them. When painting the grille do not put such a

heavy coat of paint on the grille that the perforations are blocked.

If there is no sound coming from one speaker:

.Check the balance control on the receiver/amplifier. Make sure it

is centered.

.Check all wiring and connections between the receiver/amplifier

and the speakers. Make sure all wires are connected. Make sure

none of the speaker wires are frayed, cut or punctured.

THEATER SOLUTIONS

Product specificaties