Teltonika PRIEDASKIR Handleiding

Bekijk gratis de handleiding van Teltonika PRIEDASKIR (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 6 mensen en kreeg gemiddeld 5.0 sterren uit 5 reviews. Heb je een vraag over Teltonika PRIEDASKIR of wil je andere gebruikers van dit product iets vragen? Stel een vraag

RFID reader

DATASHEET // RFID reader

1-WIRE WIRELESS AUTHENTICATION READER

Technical data

InterfaceWhite wire – 1-wire data, Brown wire – power supply, Green - ground

Power supply range6,5-30 V DC

Frequency125 kHz

Type of transponder Manchester, 64 cycles per bit

Antenna surface area6,8 cm2

Reading range4 cm

Reading frequency

6 times per second for identication

2 times per second when transponder is in range of the reader

Supported 1-Wire commands

0x33 (0x0F) - Read ROM

0xF0 - Search ROM

Mounting methodM12 Thread

Cable length40 cm

Operating temperatureFrom -20 ºC to +55 ºC

RegulatoryRoHS certied

Copyright © 2020, Teltonika. Specications and information given in this document are subject to change by Teltonika without prior notice.

COMPATABILITY

Reads RFID devices and emulates signal as iButton

for easy compatability.

125 KHZ STANDARD

Supports the Unique 125 kHz RFID device standard

The easy solution for implementing driver authentication using RFID. Read is able to receive

identication data wirelessly from passive transponders (cards, tags, etc.).

Product specificaties