Tecsun PL450 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Tecsun PL450 (5 pagina's) in de categorie Portable radio. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Tecsun PL-450 User's Manual
Picture illustration
Power On
1.Insert 3 AA batteries or connect the radio with the power adapter.
2.Long press the (1) POWER/SLEEP button.
Radio Listening
1. Band Selection -
Short press (12) FM-MW-LW to select the band. Short press (13) SW.METER BAND repeatedly
to select the meter band. Under the frequency mode, you can input, for example, 1,9 and press (13)
SW.METER BAND button to get fast access to 19 meter band.
2. Station Searching -
2.1 Manual or Auto Search – Short press (6) UP or (7) DOWN button to adjust the
frequencies. Long press (6) UP or (7) DOWN button for auto search. The searching process
will stop for 5 seconds when it find a station. Short press the (6) UP or (7) DOWN button to
confirm otherwise the radio will continue to search for the next station.
1
www.tecsunradio.com hch@cantonmade.com
2.2 Tuning Knob - Rotate the (25) TUNING knob to search for the station. You can short
press the (5) TUNING FAST/SLOW button to set the step.
2.3 Direct Frequency Input – Example : MW 756kHz . Short press (12) FM-MW-LW.
Select MW. Then press the number 7, 5,6 .
2.4 ATS – Long press (12) FM-MW-LW button , the radio will auto search and store all the
stations. You can use the (25) TUNING knob or short press (6) UP or (7) DOWN to select
from the stored stations.
3. Volume Control, Treble/Bass - (28) Volume , (22) Treble/Bass
4. Use of Antenna – Extend the (2) antenna to receive FM or SW stations. Rotate the radio for best
reception for MW/LW stations.
Power Of f
1. Long press (1) POWER/SLEEP .
Battery Recharge
1. Insert the included rechargeable batteries.
2. Connect the power adapter.
3. Under radio off mode, short press (16) CHARGE ON/FF button to start the charging process.
The charging process will stop automatically when the batteries are fully charged.
Memory Presets and Recall
Memory Presets :
1. The radio can store 600 stations. Page 1- 10 with 50 stations each page and Page P0 with 100
stations preset as factory default.
2. Search for the required station. Short press (17) MEMORY . You will see the station flashing.
Short press (17) MEMORY again to confirm. You can exit operation any time with the (25)
TUNING knob.
Memory Recall :
1. Short press (8) FREQ./PRESET button to listen to the preset stations.
2. Rotate (25) or short press (6) UP or (7) DOWN to switch for stations.
ATS
1.Long press (12) FM-MW-LW button until the search process starts. Stations will be stored from
“P0:01”. The radio will turn to the first station when the searching process is finished. Rotate (25)
or short press (6) or (7) to switch between stations.
Page Change
1. After you have searched the station, short press (17) MEMORY .
2. Short Press (9) PAGE button , the page number will blink.
3. Rotate (25) TUNING knob or short press (6) or (7) to select the page for storage.
Time Set
2
www.tecsunradio.com hch@cantonmade.com
Clock Setting :
1. Long press (10) TIME , the hour digit will blink.
2. Rotate (25) TUNING knob or short press (6) UP , (7) DOWN button to adjust the hour.
3. Short press (10) TIME button , the minute digit will blink.
4. Rotate (25) TUNING knob or short press (6) UP, (7) DOWN button to adjust the minute. The
setting will be confirmed automatically after three seconds.
Alarm Time Setting :
1. Under off mode, long press (11) ALARM button , the hour digit will blink.
2. Rotate (25) TUNING knob or short press (6) UP , (7) DOWN button to adjust the hour.
3. Short press (11) ALARM button , the minute digit will blink.
4. Rotate (25) TUNING knob or short press (6) UP, (7) DOWN button to adjust the minute.
5. Short press (11) , the sleep and the alarm icon will blink.
6. Rotate (25) TUNING knob or short press (6) UP, (7) DOWN button to adjust the sleep time (auto
power off ) .
Direct Number Input :
1. Example 6:30 – Long press (10) , the hour digit will blink. Short press 0,6,3,5 . The clock will
confirm the setting automatically after 3 seconds.
2. Example 13:45 – Long press (10) , the hour digit will blink. Short press 1,3,4,5. The clock will
confirm the setting automatically after 3 seconds.
Setting Station for Wake-to-radio :
1. Turn on the radio and search for the required station.
2. Long press (11) ALARM. After you have set the alarm time , the radio will turn on at the preset
time and radio station. Please aware that at that time only (1) POWER/SLEEP , (4)
LIGHT/SNOOZE buttons will work.
Snooze Function
1.Turn on the radio with wake-to-radio function.
2. Short press (4) LIGHT/SNOOZE to turn off the radio. The radio will turn on again after 10
minutes. The snooze function can be turned on for three times. When you press the the snooze
button the fourth time. The radio will turn off without any further operation.
Sleep Function
1. You can set the radio to turn off in 1 to 120 minutes. Short press (POWER/SLEEP) button to turn
on the radio. The sleep icon will blink with 30 minutes as default setting.
2. Rotate (25) TUNING knob or short press (6) UP, (7) DOWN button to adjust the time to turn off
the radio.
Memory Deletion
Delete station :
1. Under radio on mode, short press (8) FREQ/PRESET to display the current page and station.
2. Rotate (25) TUNING knob or short press (6) UP, (7) DOWN button to switch to the station you
would like to delete.
3. Long press (15) DELETE button, the “del” icon will blink.
3
www.tecsunradio.com hch@cantonmade.com


Product specificaties

Merk: Tecsun
Categorie: Portable radio
Model: PL450

Heb je hulp nodig?

Als je hulp nodig hebt met Tecsun PL450 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden