Technoline WS 9032 Handleiding

Technoline Weerstation WS 9032

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 9032 (16 pagina's) in de categorie Weerstation. Deze handleiding was nuttig voor 104 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16

Stand

LCD Display

Function keys

WEATHER STATION

Instruction Manual

INTRODUCTION:

Congratulations on purchasing this state-of-the-art weather station as an example of innovative

design and quality piece of engineering. Providing radio controlled time, date, calendar, Moon

phase, indoor and outdoor temperature, indoor and outdoor relative humidity, and air pressure

history information. This unit will never keep you guessing on current and future weather conditions.

Operation of this product is simple and straightforward. By reading this operating manual, the user

will receive a better understanding of the Weather Station together with the optimum benefit of all its

features.

FEATURES:

The Weather Station

DCF Radio controlled time with manual setting option

Time reception ON/OFF (user selectable)

12/24 hour time display

Time zone option ±12 hours

Weekday and day calendar display (year and month only in setting mode)

Alarm setting with snooze function

Display 12 Moon phases throughout the year

Weather forecasting with weather tendency indicator

Indoor comfort indicator

Temperature display in ºC/ºF

Indoor and outdoor temperature display with MIN/MAX records and time of reception

Humidity data display as RH%

Indoor and outdoor humidity display with MIN/MAX records

Relative air pressure hPa/ inHg with adjustable reference value

Weather icon sensitivity setting

Relative air pressure history for the past 24 hours (electronic barometer with barometric

pressure trend)

LCD contrast selectable

Can receive up to 3 outdoor transmitters

LED back light

Low battery indicator

Table standing or wall mounting

The Outdoor Thermo-Hygro Transmitter

Remote transmission of outdoor temperature

and humidity to weather station by 433MHz

signals

Shower proof casing

Wall mounting case

TO INSTALL AND REPLACE BATTERIES IN THE WEATHER STATION

The Weather Station uses 3 x AA, IEC LR6, 1.5V batteries. To

install and replace the batteries, please follow the steps below:

Hanging hole

1. Insert finger or other solid object in the space at the bottom

center of the battery compartment and lift up to remove the

cover.

2. Insert batteries observing the correct polarity (see

marking).

Battery

compartment 3. Replace compartment cover.

TO INSTALL AND REPLACE BATTERIES IN THE THERMO-HYGRO

TRANSMITTER

The Thermo-hygro transmitter uses 2 x AA, IEC LR6, 1.5V batteries. To install

and replace the batteries, please follow the steps below:

1. Remove the battery cover.

2. Insert the batteries, observing the correct polarity (see marking).

3. Replace the battery cover on the unit.

Note:

In the event of changing batteries in any of the units, all units need to be reset by following the

setting up procedures. This is because a random security code is assigned by the transmitter at

start-up and this code must be received and stored by the Weather station in the first 3 minutes of

power being supplied to it.

BATTERY CHANGE:

It is recommended to replace the batteries in all units on an annual basis to ensure optimum

accuracy of these units.

Please participate in the preservation of the environment. Return used batteries to

an authorized depot.

SETTING UP

1. First, insert the batteries into the Weather station (see “How to install and replace batteries

in the Weather station” above). Once the batteries are in place, all segments of the LCD will

light up briefly and a short signal tone will sound. Then the indoor temperature and humidity,

the time as 0:00 the date as TH.1., the moon icon, the weather icons (sun and clouds) will be

displayed. If the indoor temperature and humidity are not displayed after 15 seconds, remove

the batteries and wait for at least 1 minute before reinserting them. Once the indoor data is

displayed proceed to step 2.

2. Within 3 minutes of activating the Weather station, place the batteries into the transmitter (see

“How to install and replace batteries in the Thermo-Hygro outdoor transmitter“ above).

3. After inserting the batteries into the transmitter, the Weather station will start receiving data

from the transmitter. The outdoor temperature and humidity data should then be displayed on

the Weather station. If this does not happen after 3 minutes, the batteries will need to be

removed from both units and reset from step 1.

4. The Weather station can take up to 3 remote transmitters. If you have purchased additional

transmitters, follow step 2 for all extra transmitters. However, ensure that you leave 10

seconds in between the reception of the last transmitter and the set-up of the following

transmitter. The Weather station will number the transmitters in the order of set-up, i.e. the

first transmitter will have the temperature and humidity displayed with the number 1 against it

and so on.

5. Before all the transmitters are set up, there is a testing period, during which the display

switches quickly between all the received transmitters at random, according to which random

transmission it receives. The process will stop automatically if up to 3 transmitters are

received or no keys are pressed for a few minutes.

6. Once the remote data have been received and displayed on the Weather station, the DCF-77

time code reception is automatically started. This takes typically between 3-5 minutes in good

conditions. This time period is an excellent opportunity to locate the transmitter(s) in suitable

location(s) outdoors. In order to ensure sufficient 433 MHz transmission however, this should

under good conditions be no more than 100 meters from where the Weather station will be

finally positioned (see notes on “Positioning” and “433MHz Reception”).

IN key OUT/+ key

ALM/DATE key

SET key

7. If after 10 minutes, the DCF time has not been received, use the SET key to manually enter a

time and date initially. The clock will automatically attempt to receive the DCF time at each full

hour. When this is successful, the received time will override the manually set time. The date

is also updated with the received time. (Please refer also to notes on “Radio controlled Time

Reception” and “Manual Time Setting”).

SNOOZE/CH key

Note:

In the event of changing batteries of the units, ensure the batteries do not spring free from the

contacts. Always wait at least 1 minute after removing the batteries before reinserting, otherwise

start up and transmission problems may occur.

RESETTING

The Weather Station and the Thermo-hygro transmitter need to be reset when one of the following

conditions occur:

Unsuccessful 433MHz signal reception.

Malfunction on the units.

Batteries replacement.

For resetting, remove all batteries from the units. Wait at least for 1 minute before powering up the

Weather station again. Proceed from step 1 in “Setting Up”.

DCF RADIO CONTROLLED TIME

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch

Technische Bundesanstalt Braunschweig which has a time deviation of less than one second in one

million years. The time is coded and transmitted from Mainflingen near Frankfurt via frequency

signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. Your radio-

controlled Weather Station receives this signal and converts it to show the precise time in summer

or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases, there

should be no reception problems within a 1500km radius of Frankfurt.

Once the outdoor data reception test period is completed, the DCF tower icon in the clock display

will start flashing in the upper left corner. This indicates that the clock has detected that there is a

radio signal present and is trying to receive it. When the time code is received, the DCF tower

becomes permanently lit and the time will be displayed.

If the tower icon flashes, but does not set the time or the DCF tower does not appear at all, then

please take note of the following:

Recommended distance to any interfering sources like computer monitors or TV sets is a

minimum of 1.5 - 2 meters.

Within ferro-concrete rooms (basements, superstructures), the received signal is naturally

weakened. In extreme cases, please place the unit close to a window and/ or point its front or

back towards the Frankfurt transmitter.

During nighttime, the atmospheric disturbances are usually less severe and reception is

possible in most cases. A single daily reception is adequate to keep the accuracy deviation

below 1 second.

FUNCTION KEYS:

Weather Station:

The Weather Station has 5 easy to use function keys:

SET key

Press and hold the key to enter manual setting modes: LCD contrast, time zone, time

reception ON/OFF, 12/24 hour display, manual time setting, calendar, temperature °C/°F,

pressure hPa / inHg, relative pressure value, and weather icon sensitivity setting

Reset all MIN/MAX records

Stop the alarm during alarm ringing

Stop snooze mode

Back-light on

ALM/DATE key

Press and hold key for 3 seconds to enter the alarm setting mode

Active/de-active the alarm time

Stop the alarm during alarm ringing

Stop snooze mode

Display date

Back-light on

IN key

Press to toggle between MAX/MIN and current indoor temperature/humidity data

Press to set the alarm hour (inside alarm setting mode)

Decrease relative pressure value (within manual set mode)

Stop the alarm during alarm ringing

Stop snooze mode

Back-light on

Product specificaties

Merk:	Technoline
Categorie:	Weerstation
Model:	WS 9032
Kleur van het product:	Zilver
Ingebouwd display:	Ja
Breedte:	31.2 mm
Diepte:	117.4 mm
Hoogte:	227.1 mm
Meeteenheid temperatuur:	F, °C
Accu/Batterij voltage:	1.5 V
Alarm functie:	Ja
Klok functie:	Ja
Meetfuncties:	Indoor hygrometer, Indoor thermometer, Outdoor hygrometer, Outdoor thermometer
Meetfuncties trend display:	Hygrometer, Thermometer
weerstation extremum data:	Hygrometer, Thermometer
Weersvoorspelling:	Ja
Type batterij:	AA
Aantal batterijen (receiver):	3
Vochtigheid meetbereik (buiten) (H-H):	0 - 99 procent
Aantal batterijen (sensor):	2
DCF radio klok:	Ja
Oudoor sensorbereik:	100 m
Maanfase:	Ja
Zonsopkomst/zonsondergang tijd:	Ja