Technoline WS 7019 Handleiding

Technoline Weerstations WS 7019

Lees hieronder de 📖 handleiding in het Nederlandse voor Technoline WS 7019 (7 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7

INSTRUCTION MANUAL OF WS 7019

ENVIRONMENTAL RECEPTION EFFECTS

Your radio controlled clock obtains the accurate time with wireless technology. Same as

All wireless devices, the receiving ability maybe affected by, but not limited to, the following

circumstances:

 Long transmitting distance

 Nearby mountains and valleys

 Among tall buildings

 Near railway, high voltage cable etc.

 Near freeway, airport, etc

 Near construction site

 Inside concrete buildings

 Near electrical appliances

 Neat computers and TV’s

 Inside moving vehicles

 Near metallic structures

Place your clock at a location with optimal signal, i.e. close to a window and way from metal surfaces or

electrical appliances.

Step 1 Inset the stand to the bottom of your weather station.

Step 2 Slide open the battery cover at the back of your weather station, then insert 3 x AA alkaline

batteries into the battery compartment to the back of your weather station by observating the correct +/-

polarity signs inside the battery compartment. Replace the battery cover.

Step 3 Keep your Weather Station and wireless sensor next to each other. Slide open the battery

cover at the back of your wireless outdoor sensor, then insert 2 x AA alkaline batteries to the back of it.

Replace the battery cover. Your weather station will receive data signal from the outdoor sensor in few

seconds. Then place your outdoor sensor in a dry and shaded area outdoor.

Step 4 Peel off the protective label on the front. Your Weather Station is ready to work for you.

Step 5 After your weather station receives the outdoor temperature and humidity, it will start to search

for the DCF signal. This may take overnight. In case your weather station does not catch the DCF

signal during the day, set the clock manually.

Remarks:

1. Keep in mind that your outdoor sensor has a 100-feet open air transmission with no obstructions.

Actual transmission range will vary depending on what is in the path of the signal. Each obstruction

(roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in half.

2. During reception of the DCF time signal, all buttons do not function and your weather station does

not take temperature and humidity measurement. After first time installation, the temperature and

relative humidity readings will get stable and become more accurate in around 30 minutes.

3. The backlight of LCD is on when the user press the Snooze / Light button.

DCF SIGNAL RECEPTION AND SIGNAL INDICATOR

After your clock is powered up, it starts to receive DCF signal. The icon flashes.

Weak or no DCF signal (only icon flashing)

Receiving strong DCF signal ( icon flashing)

Successful Reception ( icon becomes static)

Failed Reception ( icon disappear)

Remark : when your clock is receiving radio controlled time signal, all buttons except the snooze / light

button do not function.

DCF TIME SIGNAL RECEPTION

Your weather station will automatically update itself to the exact time after receipt of the DCF time code.

This typically takes over night. The clock will automatically attempt to receive the DCF signal every

night at 1:00 am, 2:00 am, 3:00 am, 4: 00 am and onwards. If it receives DCF signal at 3:00 am it will

stop receiving until 1: 00 am next day.

To start DCF reception manually, press WAVE / - / C/ F button for 2 seconds. To stop DCF reception,

press and hold WAVE / - / C/ F for 2 seconds.

TO ADJUST THE VIEWING ANGLE

You could adjust your weather station clock to 3 different angles for better viewing.

Remark: Do not over push the top case backward with force or you may break the stand.

TO SET CALENDAR, TIME, 12/24 HR TIME FORMAT

1. Press and hold SET / ALM SET for 2 seconds, time digits change to year “2009” and flash. Press + /

- to set year.

2. Then press SET / ALM SET once again, month digits flash. Press +/- button to set month.

3. Then press SET / ALM SET once again, date digits flash. Press +/- button to set date.

4. Then press SET / ALM SET once again, time digits change to “00”, press +/- to select time zone: -

“00” = GMT +1 hour (e.g. Germany)

“01” = GMT +2 hours (e.g. Finland)

“-01” = GMT 00 hour (e.g. U.K.)

6. Then press SET / ALM SET once again, hour digits flash. Press+/- to set the hours.

7. Then press SET / ALM SET once again, minute digits flash. Press +/- button to set the minutes.

Product specificaties

Merk:	Technoline
Categorie:	Weerstations
Model:	WS 7019
Kleur van het product:	Wit
Ingebouwd display:	Ja
Breedte:	80 mm
Diepte:	195 mm
Hoogte:	145 mm
Meeteenheid temperatuur:	F, °C
Accu/Batterij voltage:	1.5 V
Alarm functie:	Ja
Klok functie:	Ja
Ophangsysteem voor aan de muur:	Ja
Meetfuncties:	Indoor hygrometer, Indoor thermometer, Outdoor hygrometer, Outdoor thermometer, Rain sensor
Meetfuncties trend display:	Hygrometer, Thermometer
weerstation extremum data:	Hygrometer, Thermometer
Weersvoorspelling:	Ja
Type batterij:	AA
Aantal batterijen (receiver):	3
Aantal batterijen (sensor):	2
DCF radio klok:	Ja
Voorspellingsdata ontvanger:	Ja