Techno Line MA10450 Handleiding

Bekijk gratis de handleiding van Techno Line MA10450 (2 pagina’s), behorend tot de categorie Asztali. Deze gids werd als nuttig beoordeeld door 15 mensen en kreeg gemiddeld 4.0 sterren uit 7 reviews. Heb je een vraag over Techno Line MA10450 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Quick reference

MA10450 indoor and outdoor temperature sensor with

indoor display

MOBILE-ALERTS Sensor

This is a sensor set for the "MOBILE-ALERTS" system,

it can be used with this system only. To use the sensor

you need a MOBILE-ALERTS gateway.

Sensor set up

Open the battery compartment of the temperature

sensor TX51-IT and put in 2x AAA batteries with the

correct polarity. Now open the battery compartment of

the MA 10450 indoor display and put in 2x AAA

batteries with the correct polarity. After approx. one

minute, outdoor temperature is displayed.

In case of a disconnection between transmitter and

receiver, lines are displayed in the "Outdoor" section,

remove batteries from both devices for 2 minutes.

Reinsert batteries beginning with the outdoor sensor.

Add MA10450 Sensor

Open the app, dashboard is displayed. Tap "Add new

sensor" and scan the QR code on the back of the

temperature sensor. Then set a name for the sensor.

Placing sensors

Place the indoor sensor between the outdoor

temperature and the Mobile-Alerts Gateway. Place the

outdoor sensor outside, protected from direct sun and

rain.

Specications

Batteries MA10450: 2 x micro (LR03, AAA)

alkaline

Batteries TX51-IT: 2 x micro (LR03, AAA)

alkaline

Battery life: approx. 18 months

Measuring range indoor tem-

perature MA 10450: – 9.9°C to +59.9°C

Measuring range outdoor tem-

perature TX51-IT: – 29.9°C to +59.9°C

Accuracy: 1 °C

Measurement intervals: 30 seconds

Transmission to Gateway: 10 Minuten

Transmission range: 100m (open area)

Product specificaties