Teac LS-301 Handleiding

Teac Speaker LS-301

Lees hieronder de 📖 handleiding in het Nederlandse voor Teac LS-301 (24 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24

ENGLISH FRANÇAIS ESPAÑOL DEUTSCH ITALIANO NEDERLANDS SVENSKA

OWNER’S MANUAL

MODE D’EMPLOI

MANUAL DEL USUARIO

BEDIENUNGSANLEITUNG

MANUALE DI ISTRUZIONI

GEBRUIKERSHANDLEIDING

BRUKSANVISNING

Coaxial 2-Way Speaker System

LS-301

3-530008-029642

Safety instructions 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before use 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting up the speakers 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting the speakers 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Before useTable of contents

Safety instructions

Checking the included accessories

In the unlikely event that any of the following included items is missing or

damaged, please contact the store where you purchased the product.

Speaker cables (1.8 m or 6 ) × 2'

Cork speaker feet × 8

Owner's manual (this document) × 1

oKeep this manual in a safe place for future reference.

Warranty × 1 (for customers in the USA and Canada only)

oSee page 23 for information about the warranty in Europe and other

countries or areas.

Product registration

Customers in the USA, please visit the following TEAC website to register

your TEAC product online.

http://audio.teac.com/support/registration/

Precautions for use

oDo not strike the enclosure (cabinet) or front surface Saran Fiber with hard

objects. Doing so could cause scratching or damage the speaker units.

oAvoid contact with rubber and vinyl for long periods of time, because it

could damage the surface.

oThis product has been designed to minimize magnetic effects, but you

should not place cards, tapes and discs that use magnetic recording or

other items that are easily affected by magnetic force on top of it. Failure

to do so could result in data loss or damage.

oListen within an appropriate input level range from the amplifier.

Excessive input could damage the speaker units.

Moreover, even if the input level is less than the maximum, signals with a

frequent clipping, for example, will have a negative impact on the speaker

units. Please be careful to prevent distortion of the audio at the amplifier.

Cleaning

oWhen the surface becomes dirty, use a soft dry cloth to wipe it clean. Do

not wipe it with finemeshed cleaning cloths, chemical cleaning cloths,

thinner, abrasives or similar materials. Doing so could damage the surface.

oUse a clothing brush or a similar tool to remove dust that sticks to the

Saran Fiber.

Company names and product names in this document are the trademarks or

registered trademarks of their respective owners.

Thank you for choosing TEAC.

Read this manual carefully to get the best performance from this unit.

To use this product safely

V CAUTION

Please read the following cautions carefully in order to prevent injury to

yourself or others and damage to property.

Before connecting to an amplifier or similar equipment, turn off the

power, carefully read the manuals of the equipment that you are

connecting and follow their instructions.

Always use the specified cords to make connections.

Minimize the volume before turning the power on.

Failure to do so could cause sudden loud noises that might harm your

hearing or cause other trouble.

Do not install in an unstable location, such as on an unstable stand

or on a slope, or in a location with frequent vibrations.

It could fall down or fall over, causing injury.

Do not use for long periods of time to listen to distorted audio.

Doing so could cause the speaker units to generate heat, leading to fire or

injury.

ENGLISH

Connecting the speakers (1)

Speaker cables

oUse the included speaker cables or commercially-available cables

designed for speakers.

oWe recommend using the shortest speaker cables possible.

oWe recommend using left and right speaker cables of the same length.

CAUTION

Before connecting

Always turn the amplifier's power OFF before connecting speakers.

After connecting

Turn the volume down completely before turning the amplifier's power

ON to prevent sudden loud noises.

Confirm that the speaker terminals have been connected correctly and

that cables are not contacting other terminals.

Connecting the cables

Bare/sleeved wire

Insert the core wire through the hole

in the terminal completely and tighten

the cap firmly.

Spade lugs

Place the spade around the terminal

and tighten the cap firmly.

oWhen using spade lugs to connect

the speakers, they should have an

inside diameter of at least 8 mm

(3/8 )."

Banana plugs

Tighten the cap

After connecting the banana plug to

the speaker cable, insert the plug into

the terminal.

oCarefully read the instructions for

the banana plugs that you are

using.

Precautions for installation

oDo not install in a location that becomes hot, including places exposed to

direct sunlight or near heating equipment. Doing so could cause damage.

oDo not install in a location that becomes humid, including near humidifiers.

Moreover, do not install in a location that become smoky. Doing so could

cause damage.

oDo not place obstacles between the speakers and the listening position.

Obstacles block the direct sound, which can change the sound quality.

oIdeally, no items that reflect sound or resonate should be in the nearby

environment. For example, glass doors sometimes resonate. To prevent

this, fix them securely or use thick curtains or similar materials to absorb

sound.

In addition, parallel walls make it easy for standing waves to occur, so

place furniture to disrupt parallel surfaces and use thick curtains or similar

materials to absorb sound.

Speaker placement

oFor stereo playback, the left and right speakers should usually be placed

so that they form an equilateral or isosceles triangle with the listener at

the top corner.

Listening position

Attaching cork speaker feet (included)

When installing these speakers, you can attach the included cork speaker

feet to the bottoms of the speakers if desired.

oAttaching the cork speaker feet could change the sound quality. Use of

the feet is optional.

oAttaching the cork speaker feet should reduce rattling caused by uneven

contact between the speaker and floor surfaces.

Setting up the speakers

Product specificaties

Merk:	Teac
Categorie:	Speaker
Model:	LS-301
Kleur van het product:	Kers
Gewicht:	2700 g
Breedte:	161 mm
Diepte:	207 mm
Hoogte:	230 mm
Gebruikershandleiding:	Ja
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	20 W
Aanbevolen gebruik:	Luidsprekerset
Impedantie:	6 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Tafelblad/Boekenplank
Woofer:	Ja
Peak Music Power Output (PMPO):	50 W
Frequentiebereik:	65 - 40000 Hz
Gevoeligheid:	85 dB
Bass reflex:	Ja
Luidspreker soort:	2-weg
Diameter woofer:	4 "
Diameter hogetonenluidspreker:	0.75 "
Tweeter:	Ja
Banana connector:	2