TC Electronic Studio Konnekt 48D Handleiding

TC Electronic Niet gecategoriseerd Studio Konnekt 48D

Lees hieronder de 📖 handleiding in het Nederlandse voor TC Electronic Studio Konnekt 48D (37 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/37
User’s Manual
English Version
Studio Konnekt 48
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid
injury from tip-over.
13 Unplug this apparatus during lightning storms or when
unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
• This equipment should be installed near the socket
outlet and disconnection of the device should be easily
accessible.
• To completely disconnect from AC mains, disconnect the
power supply cord from the AC receptacle.
• The mains plug of the power supply shall remain readily
operable.
• Do not install in a confined space.
• Do not open the unit – risk of electric shock inside.
Caution:
You are cautioned that any change or modifications not expressly
approved in this manual could void your authority to operate this
equipment.
Service
• There are no user-serviceable parts inside.
• All service must be performed by qualified personnel.
Warning!
• To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture and objects filled with
liquids, such as vases, should not be placed on this
apparatus.
• This apparatus must be earthed.
• Use a three wire grounding type line cord like the one
supplied with the product.
• Be advised that different operating voltages require the use
of different types of line cord and attachment plugs.
• Check the voltage in your area and use the correct type.
See table below:
Voltage Line plug according to standard
110-125V UL817 and CSA C22.2 no 42.
220-230V CEE 7 page VII, SR section
107-2-D1/IEC 83 page C4.
240V BS 1363 of 1984.
Specification for 13A fused
plugs and switched and
unswitched socket outlets.
The lightning flash with an arrowhead symbol within
an equilateral triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
a
EMC/EMI
This equipment has been tested and found to comply
with the limits for a Class B Digital device, pursuant to
part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in residential
installations. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
For Customers in Canada:
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
Certificate of Conformity
TC Electronic A/S, Sindalsvej 34, 8240
Risskov, Denmark, hereby declares on own
responsibility that the following product:
Studio Konnekt 48
that is covered by this certificate and
marked with CE-label conforms with
following standards:
EN 60065 Safety requirements for mains
(IEC 60065) operated electronic and
related apparatus for household
and similar general use
EN 55103-1 Product family standard for
audio,video, audio-visual and
entertainment lighting control
apparatus for professional use.
Part 1: Emission.
EN 55103-2 Product family standard for
audio, video, audio-visual and
entertainment lighting control
apparatus for professional use.
Part 2: Immunity.
With reference to regulations in following
directives:
73/23/EEC, 89/336/EEC
Issued in Risskov, September 2007
Mads Peter Lübeck
Chief Executive Officer
TC Electronic, Sindalsvej 34, DK-8240 Risskov – info@tcelectronic.com Manual revision 1.0English Version
INTRODUCTION
Safety instructions . . . . . . . . . . . . . . . . . . . . . .a
EMC/EMI & Certificate of Conformity . . . . . . . .b
Table of contents . . . . . . . . . . . . . . . . . . . . . . .3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Setup notes . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Computer requirements . . . . . . . . . . . . . . . . . .5
OVERVIEW
Front panel overview . . . . . . . . . . . . . . . . . . . .6
Rear panel overview . . . . . . . . . . . . . . . . . . . . .8
CONTROL PANEL
Mixer page . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Preset handling . . . . . . . . . . . . . . . . . . . . . . .15
Setup page . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Bass management . . . . . . . . . . . . . . . . . . . . .20
SETUP EXAMPLES
Studio recording & monitoring . . . . . . . . . . . .22
Bass management & integration . . . . . . . . .24
Integrator . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Konnekt WDM driver . . . . . . . . . . . . . . . . . . .29
System settings . . . . . . . . . . . . . . . . . . . . . . .30
Studio Kontrol Remote . . . . . . . . . . . . . . . . . .34
Studio Kontrol Remote page . . . . . . . . . . . . .38
Fabrik C Studio . . . . . . . . . . . . . . . . . . . . . . . .40
Fabrik R Studio . . . . . . . . . . . . . . . . . . . . . . . .52
Preset Handling . . . . . . . . . . . . . . . . . . . . . . .58
ResFilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Tuner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64
APPENDIX
ASIO channel names . . . . . . . . . . . . . . . . . . .66
Signal flow . . . . . . . . . . . . . . . . . . . . . . . . . . .67
FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68
Shortcut keys . . . . . . . . . . . . . . . . . . . . . . . . .68
DICE background . . . . . . . . . . . . . . . . . . . . . .68
Firmware update & Reset to default . . . . . . . .69
EMC / EMI & CERTIFICATE OF CONFORMITY TABLE OF CONTENTS
3b

Product specificaties

Merk: TC Electronic
Categorie: Niet gecategoriseerd
Model: Studio Konnekt 48D

Heb je hulp nodig?

Als je hulp nodig hebt met TC Electronic Studio Konnekt 48D stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd TC Electronic

TC Electronic

TC Electronic DYN 3000 Native Handleiding

31 Maart 2024
TC Electronic

TC Electronic V550 Handleiding

1 September 2023
TC Electronic

TC Electronic Dual Wreck Handleiding

1 September 2023
TC Electronic

TC Electronic JIMS 800 Handleiding

1 September 2023
TC Electronic

TC Electronic Vintage Overdrive Handleiding

14 Juni 2023
TC Electronic

TC Electronic Forcefield Compressor Handleiding

8 Juni 2023
TC Electronic

TC Electronic Master X3 Handleiding

5 Juni 2023
TC Electronic

TC Electronic LCn Loudness Correct Handleiding

4 Juni 2023
TC Electronic

TC Electronic Vintage Compressor Handleiding

3 Juni 2023
TC Electronic

TC Electronic PEQ 3000-DT Handleiding

2 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Playtive

Playtive IAN 327221 Handleiding

1 Mei 2024
Samsung

Samsung UN32J4001AF Handleiding

1 Mei 2024
Bauknecht

Bauknecht KSI 18GF2 P2 Handleiding

27 April 2024
Fakir

Fakir Artemis TS 150 Handleiding

26 April 2024
Sony

Sony UTX-M03 Handleiding

26 April 2024
Sony

Sony URX-P03 Handleiding

26 April 2024
Sony

Sony WRU-806B Handleiding

26 April 2024
Sony

Sony UTX-B03 Handleiding

26 April 2024
Sony

Sony UTX-P03 Handleiding

26 April 2024
Sony

Sony ODS-L10 Handleiding

26 April 2024