Tannoy VTH TOP HAT Handleiding

Tannoy Speaker VTH TOP HAT

Lees hieronder de 📖 handleiding in het Nederlandse voor Tannoy VTH TOP HAT (1 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
VTH TOP HAT
Pole Mount Top Hat Accessory for VX Loudspeakers
WARNING: As the legal requirements for  ying vary from country to country, please consult your local safety standards o ce before installing any product.
We also recommend that you thoroughly check any laws and bylaws prior to installation. For more detailed information on rigging hardware and safety
procedures, please consult the full VX Series Quick Start Guide.
Installation:
1. Remove the 4 screws from the bottom of the VX speaker that hold the blanking plate in place.
2. Remove the blanking plate, then place the Top Hat  xture onto the speaker so that the pole receptacle goes into the speaker box.
3. Align the screw holes over the speaker and replace the original 4 screws to complete the installation.
2.0mm [0.08inch]
76mm [3.0inch]
4-Ø7.5mm [
Ø
0.30inch]
4.4mm [0.17inch]
Ø82mm [
Ø
3.2inch]
Ø118mm [Ø4.6inch]


Product specificaties

Merk: Tannoy
Categorie: Speaker
Model: VTH TOP HAT

Heb je hulp nodig?

Als je hulp nodig hebt met Tannoy VTH TOP HAT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Speaker Tannoy

Handleiding Speaker

Nieuwste handleidingen voor Speaker