Tanaka THT-2100SB Handleiding

Tanaka Heggenschaar THT-2100SB

Lees hieronder de 📖 handleiding in het Nederlandse voor Tanaka THT-2100SB (16 pagina's) in de categorie Heggenschaar. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
Hedge Trimmer
Model THT- 210SB/2000SB/2000SLB/
2100SB/2520SB
Handling instructions
Note:
Before using this machine, carefully read through these HANDLING INSTRUCTIONS
to ensure e cient, safe operation. It is recommended that these INSTRUCTIONS be
kept readily available as an important reference when using this machine.
THT-210SB
MEANINGS OF SYMBOLS
NOTE: Some units do not carry them
symbols
WARNING
The following show symbols used for the machine. Be sure that you understand their meaning before use.
It is important that you read, fully understand and observe the following safety precautions and warnings.
Careless or improper use of the unit may cause serious or fatal injury.
Read, understand and follow all warnings and instructions in this manual and on the unit.
Always wear eye, head and ear protectors when using this unit.
Before using your machine
• Read the manual carefully.
• Check that the cutting equipment is correctly assembled and adjusted.
• Start the unit and check the carburetor adjustment. See “MAINTENANCE”.
Contents
WHAT IS WHAT? ...............................................................................3
WARNINGS AND SAFETY INSTRUCTIONS .....................................4
SPECIFICATIONS ..............................................................................5
OPERATING PROCEDURES .............................................................6
MAINTENANCE .................................................................................7
2
WHAT IS WHAT?
Since this manual covers several models, there may be some diff erence
between these illustrations and your unit. Use the instructions that
apply to your unit.
1. Recoil starter
2. Fuel tank
3. Throttle trigger lookout
4. Throttle trigger
5. Front handle
6. Rear handle
7. Spark plug
8. Hand guard
9. Cutting blade
10. Air cleaner
11. Ignition switch
12. Blunt guard
13. Gear case
14. Choke lever
15. Lock lever
16. Release lever
17. Priming pump
18. Blade cover
19. Combi box spanner
20. Handling instructions
5
8
9
12
1
2
15
16
417
14
10
7
13
6
3
11
19 20
18
THT-210SB
THT-2000SB/ SLB
THT-2100SB/ 2520SB
3


Product specificaties

Merk: Tanaka
Categorie: Heggenschaar
Model: THT-2100SB

Heb je hulp nodig?

Als je hulp nodig hebt met Tanaka THT-2100SB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heggenschaar Tanaka

Handleiding Heggenschaar

Nieuwste handleidingen voor Heggenschaar