Tanaka PureFire PF-4000 Handleiding

Tanaka Niet gecategoriseerd PureFire PF-4000

Lees hieronder de 📖 handleiding in het Nederlandse voor Tanaka PureFire PF-4000 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
Owner’Owner’
Owner’Owner’
Owner’s Mans Man
s Mans Man
s Manualual
ualual
ual
PF-4000, PF-4010, PF-4210PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210PF-4000, PF-4010, PF-4210PF-4000, PF-4010, PF-4210
MULMUL
MULMULMULTI-PURPOSE ENGINETI-PURPOSE ENGINE
TI-PURPOSE ENGINETI-PURPOSE ENGINETI-PURPOSE ENGINE
Date 09-26-01
Supplier To The Outdoor Power Equipment Industry
ISM, Inc. • 1028 4th Street SW • Auburn, WA 98001 • Phone: (253) 333-1200 • Fax: (253) 333-1212
WWW.TANAKA-USA.COM custsvc@tanaka-ism.com
www.tanaka-usa.com 1 custsvc@tanaka-ism.com
Owner’s Manual
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210 PF-4000, PF-4010, PF-4210
Warnings and safety instructions.
Operator Safety
• Never let a child or inexperienced person
operate the machine.
• Never start or run the engine inside a closed
room or building. Breathing exhaust fumes can
kill.
Equipment Safety
• Inspect the engine and equipment before each
use. Replace damaged parts. Check for fuel
leaks and make sure all fasteners are in place
and securely fastened.
• Replace parts that are cracked, chipped or
damaged in any way before using the engine
and equipment.
Fuel Safety
• Mix and pour fuel outdoors and where there are
no sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near fuel or the
tool or while using the tool.
• Wipe up all fuel spills before starting engine.
• Move at least 3 m (10 ft) away from fueling site
before starting engine.
• Stop engine before removing fuel cap.
• Empty the fuel tank before storing. It is
recommended that the fuel be emptied after
each use. If fuel is left in the tank, store so fuel
will not leak.
• Store engine and fuel in area where fuel vapors
cannot reach sparks or open flames from water
heaters, electric motors or switches, furnaces,
etc.
Maintenance Safety
• Maintain the engine and equipment according to
recommended procedures.
• Disconnect the spark plug before performing
maintenance except for carburetor adjustments.
• Keep others away when making carburetor
adjustments.
• Use only genuine replacement parts as
recommended by the manufacturer.
Transport and storage
• Allow the engine to cool, empty the fuel tank,
and secure the engine and equipment before
storing or transporting in a vehicle.
• Empty the fuel tank before storing. It is
recommended that the fuel be emptied after
each use.
If fuel is left in the tank, store so fuel will not
leak.
• Store out of the reach of children.
• Clean the unit carefully and store it in a dry
place.
• Make sure engine switch is off when trans-
porting or storing.
If situations occur which are not covered in this manual,
take care and use good judgment. Contact your dealer if
you need assistance.
Pay special attention to statements preceded by the
following words:
WARNING!
Indicates a strong possibility of severe personal injury or
loss of life, if instructions are not followed.
CAUTION!
Indicates a possibility of personal injury or equipment
damage, if instructions are not followed.
NOTE!
Helpful information for correct function and use.
WARNING Read, understand and follow all warnings
and instructions in this manual and on
the unit.
It is important that you read, fully understand and observe the following safety precautions
and warnings for use of this engine, as well as the equipment it powers. Careless or improper
use may cause serious or fatal injury.
The engine exhaust from this product
contains chemicals known to the State
of California to cause cancer, birth
defects and other reproductive harm.
www.tanaka-usa.com 2 custsvc@tanaka-ism.com
Owner’s Manual
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210
PF-4000, PF-4010, PF-4210 PF-4000, PF-4010, PF-4210
Operating procedures
WARNING!
This a two-stroke engine. Always run the engine on fuel, which is mixed with oil.
Provide good ventilation, when fueling or handling fuel.
Fuel
• Always use branded 89 octane unleaded gasoline.
• Use Tanaka two-cycle oil or a quality two-cycle oil at mixing ratio of 50:1 (Gasoline (A) : Oil (B)).
• Never use multi-grade oil (10 W/30) or waste oil.
• Always mix fuel and oil in a separate clean container.
• Always start by filling half the amount of fuel, which is to be used. Then add the whole amount of oil. Mix (shake) the fuel
mixture.
• Add the remaining amount of fuel.
• Mix (shake) the fuel-mix thoroughly before filling the fuel tank.
Fueling
WARNING!
• Always shut off the engine before refueling.
• Slowly open the fuel tank, when removing cap, so that possible over-pressure disappears.
• Tighten the fuel cap carefully, after fueling.
• Always move the engine/equipment at least 3 m (10 ft.) from the fueling area before starting.
Before fueling, clean the tank cap area carefully, to ensure that no dirt falls into the tank.
Make sure that the fuel is well mixed by shaking the container, before fueling.
Starting
1. Set ignition switch to the ON position.
**Push priming bulb (4) several times so that fuel flows through return pipe (5).
2. Set choke lever to CLOSED position (4).
3. Pull recoil starter briskly, taking care to keep the handle in your grasp and not allowing it to snap back.
4. When you hear the engine want to start, return choke lever to RUN position (open). Then pull recoil starter briskly again.
NOTE!
If engine does not start, repeat procedures from 2 to 5.


Product specificaties

Merk: Tanaka
Categorie: Niet gecategoriseerd
Model: PureFire PF-4000

Heb je hulp nodig?

Als je hulp nodig hebt met Tanaka PureFire PF-4000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Tanaka

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd