Tamron 20mm F/2.8 Di III OSD M1:2 Handleiding

Tamron Lens 20mm F/2.8 Di III OSD M1:2

Lees hieronder de 📖 handleiding in het Nederlandse voor Tamron 20mm F/2.8 Di III OSD M1:2 (3 pagina's) in de categorie Lens. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3

TLM-F050F051F053-T/T-1910-02

Model:

F 050

F 051

F 053

Owner’s manual

20mm F/2.8 Di

III

OSD M1:2

24mm F/2.8 Di

III

OSD M1:2

35mm F/2.8 Di

III

OSD M1:2

For Sony E

󱄏

Sony

Model: F05 F0510/

Model: F053

* The Marking is a directive conformity mark of the European Community (EC).

* Das -Zeichen entspricht der EC Norm.

* La marquage est un marquage de conformité .à la direcive CEE (CE)

* La marca es marca de conformidad segun directiva de la Comunidad Europea (CE).

* Il marchio attesta la conformita alla directtiva della Comunit .à Europea (CEE)

* 标志表示符合欧州共同体(EC)指标

The EEC Conformity Report applies to the Council

Directive 2014/30/EU, 2011/65/EU and is used by

Tamron Co., Ltd., manufacturer of this product.

󱄕

󱄑

󱄓

󱄗

󱄙 󱄛

Focusing

ENGLISH

Disposal of Electrical and Electronic Equipment in Private Households.

Disposal of used Electrical & Electronic Equipment (Applicable in the

European Union and other European countries with separate collection

systems)

This symbol indicates that this product shall not be treated as household waste.

Instead it shall be collected separately for the recycling of electrical and

electronic equipment.

If the new products are purchased, this product might be handed over to the distributor or

the collection system of waste electrical and electronic equipment eventually.

By ensuring this product is disposed of correctly, you will help prevent potential negative

consequences for the environment and human health, which could otherwise be caused by

inappropriate waste handling of this product or components of this product.

If this product is disposed illegally, it might cause a possibility of penalties. For more detailed

information about recycling of this product, please contact your local Civic Ofce, your

household waste disposal service or the shop where you purchased the product.

Thank you for purchasing the Tamron lens as the latest addition to your photographic equipment.

Before using your new lens, please read the contents of this Owner’s Manual thoroughly to

familiarize yourself with your lens and the proper techniques for creating the highest quality

images possible. With proper handling and care, your Tamron lens will give you many years of

photographing beautiful and exciting pictures.

•

Explains precautions that help to prevent problems.

•

Explains things you should know in addition to basic operations.

PART NAMES (Refer to Fig. )󱄏

①

Lens hood

②

Hood attaching alignment mark

③

Hood locking mark

④

Filter ring

⑤

Hood release mark

⑥

Focus ring

⑦

Lens attachment mark

⑧

Lens-camera interface contacts

MAIN SPECIFICATIONS

Model F050 F051 F053

Focal Length 20 mm 24 mm 35 mm

Maximum Aperture F/2.8 F/2.8 F/2.8

Angle of View 94

Lens Construction 9/10 9/10 8/9

Minimum Object Distance (MOD) 0.11 m (4.3

) 0.12 m (4.7

) 0.15 m (5.9

)

Maximum Magnication Ratio 1:2 1:2 1:2

Filter Size

67 mm

Length 64 mm (2.5

) 64 mm (2.5

)

Diameter

73 mm

Weight 220 g (7.8 oz) 215 g (7.6 oz) 210 g (7.4 oz)

Lens Hood HF050 HF050 HF053

•

Length: From lens front to mount surface.

•

Features and appearances of lenses listed in this owner's manual are subject to change without

notice.

ATTACHING AND REMOVING THE LENS

Remove the rear cap of the lens. Align the lens attachment mark

⑦

and mounting mark on the

camera, and then insert the lens.

Turn the lens clockwise until it locks.

To remove the lens, turn the lens in the opposite direction while pressing the lens release button

on the camera.

•

Turn off the power of the camera before attaching or removing the lens.

•

For details, please read the instruction manual of your camera.

SWITCHING FOCUS MODE (Ref. Figs. )󱄏, 󱄑

Select the desired focus mode on the camera.

For manual focusing, turn the focus ring

⑥

to acquire the desired focus.

For details, please read the instruction manual of your camera.

•

Under AF mode, there may be difculty for autofocus to work depending on the subject.

LENS HOOD (Ref. Figs. - )󱄏, 󱄓 󱄛

A bayonet-type lens hood

①

is provided as standard equipment.

We recommend shooting with the hood properly attached because the lens hood eliminates stray

light that may affect the picture.

■

Using the lens hood

(Ref. Figs.

󱄓

󱄕

- Model F050/F051, Ref. Fig.

󱄙

- Model F053)

Align the hood attaching alignment mark

②

of the hood with the hood release mark

⑤

of the

lens.

Rotate the hood

①

in the direction of the arrow until the hood locking mark

③

meets the hood

release mark

⑤

■

Stowing the lens hood

Model F050/F051: You can stow the lens hood

①

by attaching it in reverse. Align the hood

locking mark

③

of the hood with the hood release mark

⑤

of the lens.

Rotate the hood

①

in the direction of the arrow until the hood attaching

alignment mark

②

meets the hood release mark

⑤

. (Ref. Fig.

󱄗

)

Model F053: The lens hood

①

of model F053 cannot be stowed by attaching it in

reverse. (Ref. Fig.

󱄛

) It has to be stored separately when you are not using

it.

•

Be aware that the perimeter of the photographed image may be darkened if the hood

①

is not

attached properly.

•

When using the lens hood

①

with the model F053, attach the front cap and the lter to the lens

hood

①

. Only for the model F053 the front cap and the lter can be attached to the lens hood

①

PRECAUTIONS WHEN SHOOTING

•

When using the ash, remove the lens hood and stand as far as possible from the subject.

Depending on the lens and ash used, the lens may block the light from the ash and darken the

bottom of the screen.

•

Differences in the display systems of cameras may result in the display of values different from

the maximum and minimum aperture values in the specications. This is not an indication of an

error.

•

For information on the compatibility of the product with cameras, see our website.

https://www.tamron.jp/en/support/

TO ENSURE LONG-TERM SATISFACTION

•

Remove dust and soiling on the lens by using a blower or soft brush. Do not touch the lens with

your ngers.

•

The lens surface of the front element has been coated to prevent water and oily substances from

adhering. Since it will repel water, do not use lens cleaners or other substances but only a dry

cloth to clean the front element.

•

To clean the lens surface of the rear element, lightly wipe it starting from the center with a

commercially available lens cleaning paper, a clean cotton cloth or a microber cloth (cleaning

cloth for glasses, etc.) soaked in lens cleaner. Do not use a silicone cloth.

•

Clean the lens barrel using a silicone cloth. Never use benzene, thinner, or other organic

solvents.

•

Mildew is a major problem for lenses. Store your lens in a clean, cool, and dry place. When you

store the lens in a lens case, store it with a commercially available drying agent and replace the

drying agent occasionally.

•

Do not touch the lens-camera interface contacts. If dust or stains cause contact problems,

signals are not transmitted properly between the lens and camera, and malfunctions may occur.

•

If the temperature changes suddenly, moisture may form within the camera and lens and cause

malfunctions. To prevent this, seal your equipment in a plastic bag or similar container. After your

equipment has adjusted to the ambient temperature, remove it from the bag and use it as usual.

For safe operation be sure to carefully read the "Precautions for Safe Use of Tamron Lenses" and the

manual before using the product.

After reading them, store them in a place where they can easily be reviewed whenever needed.

Caution instructions are divided into the following two categories according to the degree of danger

involved.

 Do not view the sun or other strong light source directly through the lens or through a camera

while using this lens.

Doing so could cause loss of vision, damage to the lens and/or the camera, and possibly cause

the lens and/or camera to ignite.

 Do not dissemble, repair, or modify the lens.

This could damage the lens or camera.

 Keep the lens out of the reach of small children.

There is a risk of injury if the lens is dropped or falls down.

TPL-EN-Lens-T-1701

This indicates instructions which if not followed or if performed

incorrectly could lead to death or serious injury.

Precautions for Safe Use of Tamron Lenses

ENGLISH

WARNING

 Do not place lens in direct sunlight or leave it in an extremely hot place such inside a car. Doing such

could damage the internal parts of the lens or cause a fire.

 Always attach the lens cap whenever the lens is not in use.

 When attaching the lens to the camera, ensure that the lens has been properly attached to the

camera and firmly locked.

If the lens is not attached properly, it could be difficult to remove or it could fall off causing damage

or injury.

 Do not use this lens for any application other than photography.

 Do not transport the lens while it is still attached to a tripod.

This indicates instructions which if not heeded or if performed

incorrectly could lead to bodily injury or physical damage

CAUTION

Product specificaties

Merk:	Tamron
Categorie:	Lens
Model:	20mm F/2.8 Di III OSD M1:2
Kleur van het product:	Zwart
Gewicht:	220 g
Automatisch scherpstellen:	Ja
Diameter:	73 mm
Vaste focale lengte:	20 mm
Lensstructuur (elementen/groepen):	10/9
Lengte:	64 mm
Scherpstellen:	Automatisch/handmatig
Dichtstbijzijnde focus afstand:	0.11 m
Maximum aperture number:	2.8
Minimum aperture number:	22
Maat filter:	67 mm
Lens type:	Ultra-groothoeklens
Lens kapje:	Ja
Lensdop inbegrepen:	Ja
Component voor:	MILC
Manuele focus:	Ja
Kijkhoek lens, diagonaal:	94 °
Lens mount interface:	Sony E
Aantal diafragma bladen:	7
Afbeeldingsensor format:	Full frame
Compatibele camera merken:	Sony
Lenskapvorm:	Kroonvormige lenskap
Cirkelvormige opening:	Ja
Vochtbestendig:	Ja
Kenmerken lenscoating:	Broad-Band Anti-Reflection (BBAR) coating, Fluorine coating