Tacklife SC-L01 Handleiding
Tacklife
Laserpointer
SC-L01
Lees hieronder de 📖 handleiding in het Nederlandse voor Tacklife SC-L01 (2 pagina's) in de categorie Laserpointer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
- EN - - EN - - EN - - EN - - EN - - EN - - EN - - EN - - EN -
Shenzhen Temie Technology Co. Ltd.
Web:www.tacklife.net
E-mail:support@tacklife.net
ADD:No.31, Qing Linxi Road, Longgang
District,Shenzhen, Guangdong, China 518172 CN
Mini Cross Line Laser
Model: SC-L01
User Manual
Contents
Congratulations!
You have chosen one of our laser tools that’s guaranteed reliable and
tough for professional tool users at various job sites.
• Safety
• Product Overview
• Operation Modes
• Applications
• User Guide, Maintenance and Care
• Specifications
• Warranty
Product Overview
1. Laser Windows
2. Power/Lock
3. Battery Compartment
4. 1/4-20 Mounting Thread
1
2
Safety
WARNING:
Read the Safety Instructions and User Manual thoroughly before using this
product. All users must fully understand and adhere to these instructions.
CAUTION:
While the product is in operation, be careful not to expose your eyes to the
emitting laser beam (red or green light source). Exposure to a laser beam
for an extended time may be hazardous to your eyes.
CAUTION:
Glasses may be supplied in some of the laser tool kits. These are NOT
certified safety glasses. These glasses are ONLY used to enhance visibility of
beam in brighter environments or at greater distances from laser source.
WARNING:
The following label/print samples are placed on the product to inform of
the laser class for your convenience and safety.
• Do not stare directly into the beam or view directly with optical instruments
or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in
hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate
the laser. Serious eye injury may result.
• An exposure to the beam of a Class 2 laser is considered safe for a
maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate
protection.
Applications
User Guide, Maintenance and Care
• The laser tool is sealed and calibrated at the plant to the accuracies
specified.
• It’s recommended to carry out an accuracy check before its first use
and periodic checks during future use especially for precise layouts.
• When not in use please power OFF the tool and place the pendulum
lock in its locked position.
• In Manual Mode, self leveling is OFF. The accuracy of the beam is not
ensured to be level.
• Do not short any battery terminals or charge alkaline batteries or dispose
of batteries in fire.
• Do not mix old and new batteries. Replace all of them at the same time
with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures.
The housing and some internal parts are made of plastics and may
become deformed at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although
these parts are solvent resistant, NEVER use solvents. Use a soft, dry cloth
to remove moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for extended time,
remove batteries before storage to prevent possible damage.
3
4
Warranty
We are confident of the quality of our products and offer outstanding
guarantee for professional users of the products. This statement is in addition
to and in no way prejudices your contractual rights as a professional user
Laser Class
Laser Wavelength
Leveling Accuracy
Horizontal/Vertical Accuracy
Leveling/Compensation Range
Working Distance (Line)
Working Distance
(Line with Detector)
Power Source
IP Rating
Operation Temperature Range
Storage Temperature Range
Class 2 (IEC/EN60825-1/2007)
635±5nm
±4.5mm/15m
±4.5mm/15m
4°±1°
15m
approximately 12Hours
( )10 mw diode used to split beams
2×˝AA˝ (LR6)
IP54
-10 – 50℃ ＋ ℃
-20 – 70℃ ＋ ℃
or your statutory rights as a private non-professional user. We warrant our
laser level(s) against faults in materials and/or workmanship for one year
from date of purchase provided that:
• Proof of purchase is produced.
• Service/repairs have not been attempted by unauthorized persons;
• The product has been subject to fair wear and tear;
• The product has not been misused;
Defective products will be repaired or replaced, free of charge or at our
discretion, if sent together with proof of purchase to our authorized
distributor(s).
This Warranty does not cover faults caused by accidental damage, unfair
wear and tear, and use other than in accordance with the manufacturers’
instructions or repair or alteration of this product not authorized by us.
Repair or replacement under this Warranty does not affect the expiry date
of the Warranty.
To the extent permitted by law, we shall not be liable under this Warranty
for indirect or consequential loss resulting from faults in this product. This
Warranty may not be varied without our authorization. Calibration and
care are not covered by warranty.
NOTE:
The customer is responsible for the correct use and care of the tool. Moreover,
the customer is completely responsible for periodically checking the
accuracy of the laser, and therefore for the calibration of the tool
35m
Operating Time
Operation Modes
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle in line with local provisions for the collection and disposal
of electrical and electronic waste under the WEEE Directive.
Specifications – Red Beams
1. Unlock the laser tool by switching to the Unlocked Position to turn the
laser tool ON and project the cross line.
2. Lock the laser tool by switching to the Locked Position to turn the laser
tool OFF and shut off the cross line.
3. Short press the key on the keypad while the laser tool is powered On in
the Unlocked Position to deactivate or activate out-of-self-leveling alert.
4. Laser beams will flash once every 5 seconds when out of self-leveling
range alert in the Unlocked Position is deactivated.
5. Laser beams will flash twice a second when the laser tool is out of its
self leveling range in the Unlocked Position with its self-leveling range
alert activated.
Product specificaties
| Merk: | Tacklife |
| Categorie: | Laserpointer |
| Model: | SC-L01 |
Heb je hulp nodig?
Als je hulp nodig hebt met Tacklife SC-L01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Laserpointer Tacklife
17 Juli 2023
Handleiding Laserpointer
- Laserpointer Bosch
- Laserpointer Nikon
- Laserpointer DeWalt
- Laserpointer BeamZ
- Laserpointer Bushnell
- Laserpointer GPO
- Laserpointer Hama
- Laserpointer Kensington
- Laserpointer Laserliner
- Laserpointer LED Lenser
- Laserpointer Makita
- Laserpointer Melinera
- Laserpointer Milwaukee
- Laserpointer Parkside
- Laserpointer Powerplus
- Laserpointer Ryobi
- Laserpointer Silvercrest
- Laserpointer Skil
- Laserpointer Stanley
- Laserpointer Toolcraft
- Laserpointer Uni-T
- Laserpointer Velleman
- Laserpointer Vortex
- Laserpointer Klip Xtreme
- Laserpointer Black And Decker
- Laserpointer Connect IT
- Laserpointer Steren
- Laserpointer Cocraft
- Laserpointer Hilti
- Laserpointer Kaiser
- Laserpointer Eurolite
- Laserpointer Carson
- Laserpointer Stabila
- Laserpointer ADA
- Laserpointer Da-Lite
- Laserpointer Speed-Link
- Laserpointer Vernier
- Laserpointer Stairville
- Laserpointer Laserworld
- Laserpointer Kreator
- Laserpointer Cameo
- Laserpointer Perfect Choice
- Laserpointer Prexiso
- Laserpointer Picotronic
- Laserpointer Meopta
Nieuwste handleidingen voor Laserpointer
25 Maart 2024
25 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024
6 Maart 2024