Syma X25PRO Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Syma X25PRO (18 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 72 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18
USER MANUAL
12+
1
MAIN FEATURES
GYRO REMOTE CONTROL SERIES
â—Ź Utilizes the 4-axis structure, enabling the drone to be even more flexible ,speedy,
and possessing a relatively stronger wind-withstanding capability. It suitable for
both spacious indoor and outdoor areas.
â—Ź Built-in 6-axis gyro stabilizer to ensure the accuracy of in-flight position.
â—Ź The structure uses a modular design which makes it easier to install and repair.
â—Ź With the functions of outdoor GPS fixed-point, one key return, auto return when
the drone is out of control or in low-voltage, one key ascent/descent, geomagnetic
headless, position hovering mode and 4 channels function which are up/down ,
rise/decline,turn left/right, forward/backward, left/right side flight, follow me, circle
flight .
â—Ź HD wifi real-time transmission for getting the fun of different photography.
-1-
1.Use dry and soft cloth to clean this product.
2.Avoid exposing this product to heat.
3.Do not immerse this product in water, otherwise, the electronic parts will be
damaged.
4.Transformers used with the toy are to be regularly examined for damage to the
cord,plug,enclosure and other parts,and that,in the event of such damage,the toys
must be used with this transformer until the damage has been repaired.
Safety Guide
Repair and maintenance
1.Please store the smaller-sized drone accessories in places that are out of
reach of children.
2.This drone is very powerful. For all first-time flights, the left joystick must be
slowly pushed up in order to prevent the drone from ascending too fast to
avoid unnecessary collision and possible damage and injury.
3.When the flight is ended, first turn off the power of the remote control.
Then turn off the power of the drone.
4.Avoid placing the batteries in places with high temperatures and exposure
to heat.
5.Take extra precaution to ensure that the drone is at a minimum distance of
15 feet from the pilot, other people, and animals in order to prevent bodily
injury during flight operation. A minimum separation distance of 20 cm must
be maintained between the user’s body and the device under normal use
condition.
6.This drone is for people ages 12+. It must be flown always within the line of
sight of the pilot(or instructor) and flown safely.
7.Non-rechargeable batteries are not to be recharged; Batteries are to be
inserted with the correctpolarity; Different types of batteries or new and
used batteries are not be mixed.
8.When the drone is not in use, please remove the batteries in the remote
control.
9.The supply terminals are not be short-circuited.
10.Discharge the battery to 40%-50% (On a full charge, fly for half of the total
flight time) if it will not be used for 10 days or more, this can greatly extend
the battery life.
11.Please keep a safe distance from the spinning propellers to avoid injury.
12.To ensure the electromagnetic environment requirement of the aviation
radio (station), using remote controls in the zone, which is in a radius of
about 5000m zone from the circle center of the airport runway, is forbidden.
All users also should abide by the regulation of the radio set forth by
government and regulatory agencies including the duration and area.
13.Only uses the recommended transformer for the model, and the transformer
is not a model. Disconnect the transformer from the model which is available
cleaning with liquids before cleaning. Check the cord, plug, enclosure and
other parts of the transformer regularly. If any damages have been
discovered, please immediately stop using it, until it was completely repaired.
14.Never look steadily at the laser beam since the laser radiation.
15.Attention Drone assembly under adult supervision.:
16.The pilot is responsible for the safe operation and safe distance from
uninvolved persons and property on the ground and from other airspace
users and shall never fly the drone above crowds (> 12 persons).
17.Open the battery cover of the toy with screwdriver.
18.The packing has to be kept since it contains important information.
-2-
Blade’s installation
Protective Gear’s Installation
Blade and Protective Gear’s Installation Methods
Camera’s Installation and
Dismantling Methods
Installation steps for camera
The following items can be found in this product package:
Package description
â—ŹDrone
â—ŹRemote Control
â—ŹUser Manual
â—Ź4 Blades
â—ŹUSB Charger
â—Ź4 Protective Gears
â—ŹMobile Phone Retaining Clip
1.Connect the camera’s wire
connector to the drone.
2.Place the camera into the drone and
rotate the camera counterclockwise to
lock.
Press the blade lock down, and then the blade "A" is
rotated in A clockwise direction to remove, and it is
locked in A counterclockwise rotation;The blade B is
rotated in A counterclockwise to remove, and it is locked
in A clockwise rotation.
1. Insert the protective gear into the
two jack connectors underneath the
main body as shown in Figure 1.
2. Insert the stem on the protective
gear into the jack connector on the
main body as shown in Figure 2 and
press it.


Product specificaties

Merk: Syma
Categorie: Niet gecategoriseerd
Model: X25PRO

Heb je hulp nodig?

Als je hulp nodig hebt met Syma X25PRO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Syma

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd