Swann PRO-870 Handleiding

Swann Bewakingscamera PRO-870

Lees hieronder de 📖 handleiding in het Nederlandse voor Swann PRO-870 (18 pagina's) in de categorie Bewakingscamera. Deze handleiding was nuttig voor 22 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/18

Professional

All-Purpose Security

Camera

INSTRUCTION MANUAL

MLFBCAM150514T

ENGLISH

Congratulations on your purchase of this PRO-CAM from Swann! You’ve chosen well: we

think this is one of the finest CCTV video cameras available. The PRO-CAM is great for

monitoring a specific area and is able to provide a high level of detail, even at night - it can

see up to 35m/115ft in the dark.

Placement Guide

The PRO-CAM has a 6mm, 45° lens built-in which

allows it to focus its attention onto one specific area.

What does this mean for you when placing it?

• The camera will focus on the one particular

area in front of the lens, but won’t see much

happening to the sides of it. You’ll need to aim

the camera specifically at what you want to see.

• Objects and people will look like they are slightly

closer to the camera than they really are. You’ll

be able to monitor a space which is as long (or

longer) than it is wide.

The PRO-CAM is great for monitoring long, narrow

spaces such as hallways or corridors. It’s also great

for monitoring a specific space, such as a doorway,

smaller room or staircase.

Typically, it is best mounted in a corner looking across and down into the room, so that it

can look over intervening obstacles. The higher the ceiling the camera is mounted on, the

more it will be able to see and the harder it’ll be for an intruder to access the camera or

interfere with it.

Tips: Positioning and Orienting

• Try to aim the camera at an area which is evenly lit, as objects or people in shadows

near brightly lit objects are very hard to see.

• It’s better to have the camera in the shade looking into the light than vice-versa.

• Avoid having bright light sources in your image. This includes the obvious (such as the

sun or an artificial light source) but also things such as reflections. Cars are notorious

for reflected light sources, as are buildings with a lot of windows, mirrors and so forth.

About the Camera

45°

10m

33ft

8.3m

27ft

ENGLISH

The camera mounts onto a flat surface using screws. The surface must have sufficient

strength to hold the camera. Materials such as hardwood, brick or masonry are good

options, and we’ve included all the gear you’ll need to mount it there (except the tools -

sorry, you’ll still need your own drill). You can mount the camera onto a metal surface, but

you’ll need to supply your own mounting hardware.

To mount the camera:

• Using the holes on the camera stand as a guide, mark the locations on your wall to

drill. Make sure the wall is thick and strong enough that you won’t drill through it.

• If the wall is masonry, brickwork or similar, use the provided wall plugs. If the wall is

made of wood, then the camera can be screwed directly onto the wall.

• Ensure that the cable is protected from the weather. The camera is weatherproof, but

the cable (particularly the power and video-out plugs) is not.

• Once the camera has been mounted, ensure that it is securely fixed in place. The camera

is vandal resistant, but that won’t help if an intruder can remove the whole camera!

Tips: Positioning your Cables

• When running your cable, try to avoid bending it at sharp angles.

• Don’t put your cable near live electrical wiring. AC electricity generates radio “noise”

which can interfere with the signal from your camera.

Tips: Weather Resistance

• The PRO-CAM is built to be weather resistant. It’ll stand up to getting wet occasionally,

but it’s not intended to be underwater all the time. When mounting the camera, ensure

that it’s not in a location where water is likely to pool or build up over time.

• Long term exposure to direct sunlight will adversely affect the camera. Over time, the

infrared and ultraviolet radiation will eventually begin to degrade the integrity of the

plastic and rubber components of the camera (particularly the seals, cable, protectors

and so on). Basically, put it in the shade!

• The camera itself is weather resistant, but the cables (most importantly the plugs)

are not. Ensure that all wiring and the connectors are suitably insulated and protected

from moisture and sunlight.

Tips: Night Vision

• Don’t place the camera so that there are any objects near the lens. Even transparent

or seemingly inconsequential objects (such as glass or spider’s webs) will reflect

infrared light, and effectively blind the camera at night.

Mounting the Camera

Product specificaties

Merk:	Swann
Categorie:	Bewakingscamera
Model:	PRO-870
Kleur van het product:	Wit
Gewicht:	395 g
Breedte:	70 mm
Diepte:	200 mm
Hoogte:	70 mm
Snoerlengte:	18 m
Soort:	CCTV-bewakingscamera
Gebruikershandleiding:	Ja
Materiaal behuizing:	Aluminium
Vormfactor:	Rond
Ondersteuning voor plaatsing:	Binnen & buiten
Connectiviteitstechnologie:	Bedraad
Ethernet LAN:	Nee
Montagewijze:	Plafond/muur
Stroomuitvoer (volt):	12
Minimale belichting:	0 Lux
Field of view (FOV) hoek:	50 °
Aantal cameras:	1
Meegeleverde kabels:	BNC
Nachtvisie:	Ja
LED-type:	IR
Vaste focale lengte:	6 mm
Inclusief AC-adapter:	Ja
Formaat analoog signaal:	NTSC,PAL
Aansluiting voor netstroomadapter:	Ja
Inclusief schroeven:	Ja
Aantal TV lijnen:	850
Dag/nacht modus:	Ja
BNC output ports:	1
Montagebeugels meegeleverd:	Ja
Nachtkijker afstand:	35 m
Aantal verlichtingen LEDS:	30
Wide Dynamic Range (WDR):	Ja
Wifi:	Nee
Bedrijfstemperatuur (T-T):	-20 - 45 °C
Waarschuwingsstickers:	Ja