SVS 3000 In-Wall Subwoofer System Handleiding

SVS Speaker 3000 In-Wall Subwoofer System

Lees hieronder de đź“– handleiding in het Nederlandse voor SVS 3000 In-Wall Subwoofer System (9 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
1
Unbox It
After unboxing the 3000 In-Wall Subwoofer System you will have the following items in
front of you. Please con rm all pieces are available before continuing.Č´
Congratulations on choosing the SVS 3000 In-Wall Subwoofer, a groundbreaking achievement in architectural
subwoofer design. The following steps will guide you through the quick and easy installation process.
We strongly recommend reading the 3000 In-Wall Subwoofer Owner’s Manual to get the best possible
performance. You’ll ȴ ȴnd useful information about ampli er placement, connections, DSP functions and more.
[3000 In-Wall Subwoofer]
x2 for Dual System
[Removable Magnetic Grille]
x2 for Dual System
[Subwoofer Cutout Template]
[3000 In-Wall Subwoofer AmpliČ´er]
[Subwoofer Banana Plug Pair]
x2 for Dual System
[Detachable Power Cord]
[AmpliČ´er Rack Mount Kit]
Installation Guide
3000 In-Wall Subwoofer System
3000 In-Wall
Subwoofer Cutout Template
2
Install the Subwoofer
Placement of the 3000 In-Wall Subwoofer can aÎŤect performance. If possible, it is recommended to aim for corner placement on the same wall as the front speak
the front stage in between or outside the main speakers.
The 3000 In-wall subwoofer is designed to t between standard 16” on-center stud spacing. Be sure to ȴ
check for stud placement or other obstructions when choosing where to place the subwoofer.
Use the supplied Subwoofer Cutout Template as a guide for subwoofer placement, and follow the included
instructions for preparing the wall for installation.
In most installations the 6 Dog Leg Mounting screws
can be used to lock the subwoofer to the wall. Each
of the 6 screw locations should be tightened to
engage out and lock the dog screws.
High torque drills should be set to a low or medium
clutch setting so not to over drive the screws.
In some instances, the subwoofer will be too close to a stud to
engage the dog screws.
In this case, the subwoofer front baÉže has 8 screw holes to
aÉťx the front baÉže frame of the subwoofer to the stud
directly (hardware not included).
You can now insert the
subwoofer into the
cutout.
Be sure to pay attention
to the speaker wire
position when installing
the subwoofer to avoid
pinching or cutting the
speaker wire.
If the speaker wire is coming from above,
align the subwoofer so the terminals are at
the top of the cabinet. If the speaker wire
is coming from below, ȵip the subwoofer
so the terminals are at the bottom.
The subwoofer is designed to work with
terminals at the top or bottom, the top
woofer will show the SVS logo in the
correct position. Be sure to pay attention
to the polarity of the Banana plugs and the
subwoofer binding posts.
While balancing the subwoofer with one
hand, insert the banana plugs into the
subwoofer binding posts with the other
hand.
The In-wall rated speaker wire for the subwoofer should be acce
either above or below. Strip the jacket from the speaker wire en
Pay close attention to the polarity and color of the speaker wire a
(+). The black terminal is negative (-). Unscrew the gold terminal
from the banana plug and insert the exposed bare speaker wire
into the bottom of terminal body. Then, fold the bare copper
speaker wires over the inner teeth of the terminal body.
Reassemble the gold banana plug to the terminal body and give
the speaker wire a good pull to ensure it does not come loose.
Repeat for the other speaker wire.
Cut the Hole:
Connect the Subwoofer:
Standard Mounting: Mounting Near Studs:
Insert the Subwoofer:
Connect Banana Plugs:
A
C
E F
D
B
3Install the AmpliČ´er
The best location for your 3000 In-Wall Subwoofer AmpliČ´er is close to the other
electronics in the playback system so line level and power can be connected easily.
It is also important that the AmpliČ´er can easily connect to pre-installed in-wall rated
speaker wire connected to the 3000 In-Wall Subwoofer.
On each side of the 3000 In-Wall Subwoofer
AmpliČ´er, attach the rack mount kit by
inserting the 3 screws in each rack ear by
guiding each directly into the correlating
screw holes on the side of the ampliČ´er.
Don’t overdo it, simple hand-tightening is
enough. Repeat for the second rack-mount
ear.
Once the rack-mount ears are secured, the ampliČ´er
can be installed in a standard 19-inch electronics rack
where 2U rack space is available (mounting hardware
not included). Removing the feet from the bottom of
the ampliČ´er will ensure plenty of clearance for
neighboring electronics.
The 3000 In-Wall Subwoofer Ampli er can be placed on a shelf or installed in a standard 19” equipment ȴ
rack. If installing the ampliČ´er on a shelf, the included rack-mount ears are not required. If installing the
ampliČ´er in a rack, attach the rack-mount ears before installation.
2URACK
HEIGHT
AmpliČ´er Placement:
Notes for Optimal Performance:
Attaching the Rack Mount Kit:
Rack Mounting:
It is best to leave free air space on all sides if possible to provide optimal air
ȵow and ventilation.
Place the ampliČ´er in a horizontal position, away from direct sunlight and heat
sources such as hot air ducts or radiators.
Do not place objects on top of the ampliČ´ Č´er, place the ampli er on thick
carpet, or obstruct ventilation in any way.
•
•
•
A
B
C

Product specificaties

Merk: SVS
Categorie: Speaker
Model: 3000 In-Wall Subwoofer System

Heb je hulp nodig?

Als je hulp nodig hebt met SVS 3000 In-Wall Subwoofer System stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Speaker SVS

SVS

SVS Ultra Evolution Bookshelf Handleiding

12 April 2024
SVS

SVS Ultra Evolution Titan Handleiding

12 April 2024
SVS

SVS Ultra Evolution Tower Handleiding

12 April 2024
SVS

SVS Ultra Elevation Handleiding

12 April 2024
SVS

SVS Ultra Evolution Pinnacle Handleiding

12 April 2024
SVS

SVS Ultra Evolution Nano Handleiding

12 April 2024
SVS

SVS Ultra Evolution Center Handleiding

12 April 2024
SVS

SVS Ultra Bookshelf Handleiding

3 Juli 2023
SVS

SVS Prime Elevation Handleiding

28 Juni 2023
SVS

SVS Prime Sat 5.1 Sys BA Handleiding

28 Juni 2023

Handleiding Speaker

Nieuwste handleidingen voor Speaker

OTTO

OTTO Bluetooth Revo NC2 Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata Handleiding

20 April 2024
REL Acoustics

REL Acoustics Strata III Handleiding

20 April 2024
Soen

Soen Transit Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP300RC Handleiding

18 April 2024
Soen

Soen Transit XS Handleiding

18 April 2024
Miller & Kreisel

Miller & Kreisel MP7 Handleiding

18 April 2024
Qian

Qian QRBT1801 Handleiding

17 April 2024
Focal

Focal Twin6 Handleiding

17 April 2024
Kenwood

Kenwood KFC-WPS1000F Handleiding

16 April 2024