Supermicro X7DCU Handleiding

Supermicro Moederbord X7DCU

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DCU (88 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 20 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/88

SUPER

X7DCU

USER’S MANUAL

Revision 1.0

Manual Revision 1.0

Release Date: April 11, 2008

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all

claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

manufacturer’s instruction manual, may cause interference with radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, you are encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X7DCU motherboard. The X7DCU supports dual Intel Xeon

Quad-Core/Dual-Core 5400/5300/5200/5100 Sequence processors with a front side

bus speed of up to 1333 MHz. With dual 64-bit Xeon Quad-Core/Dual-Core LGA

771 processors built-in, the X7DCU offers substantial functionality enhancements

to the motherboards based on the Intel Core microarchitecture while remaining

compatible with the IA-32 software. The features include Intel Virtualization Technol-

ogy, Enhanced Intel SpeedStep technology, and Extended Memory 64 Technology

(EM64T). These features allow the motherboard to operate at much higher speeds

with better power management in much safer thermal environments than the tra-

ditional motherboards. The X7DCU is ideal for intense computing environments,

and complex business applications. Please refer to the motherboard speciﬁ cations

pages on our web site (http://www.supermicro.com/products/motherboard/) for

updates. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see , which describes Chapter 3

troubleshooting procedures for the video, the memory and the system setup stored

in the CMOS.

Chapter 4 includes an introduction to the BIOS, and provides detailed information

on running the CMOS Setup utility.

Appendix A Appendix B and Appendix Clists BIOS POST Error Codes. provide

Windows OS and Other Software Programs Installation Instructions.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DCU
Breedte:	330.2 mm
Diepte:	205.7 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	6
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Processor socket:	LGA 771 (Socket J)
PCI Express slots versie:	2.0
Processorfabrikant:	Intel
On-board graphics adapter model:	AMD ES1000
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5100
PCI Express x16 slots:	1
PS/2 poort(en):	1
PCI Express x8 slots:	2
Component voor:	Server
Geheugen voltage:	1.8 V
Soorten RAID:	0, 1,5, 10
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	48 GB
Aantal DIMM sloten:	6
Ondersteunende RDIMM klok snelheden:	667 MHz
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 8GB
Ondersteunde geheugen types:	DDR3-SDRAM
Ondersteuning voor processor FSB:	1066,1333 MHz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Supported memory clock speeds:	533,667 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	16 Mbit
ACPI version:	3.0
USB 2.0 aansluitingen:	6
On-board graphics adapter geheugen:	32 MB
Ondersteunende UDIMM module capaciteit:	1GB, 2GB, 4GB, 8GB