Supermicro X7DBR-i+ Handleiding

Supermicro Moederbord X7DBR-i+

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DBR-i+ (128 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 17 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/128

SUPER

X7DBR-8+

X7DBR-i+

USER’S MANUAL

Revision 1.0b

Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Revision Number: 1.0b

Release Date: June 13, 2007

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in this

manual at any time and without notice. This product, including software, if any, and documenta-

tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any

medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,

INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE

OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL NOT

HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE

PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING

OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara shall

be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use of the

X7DBR-8+/X7DBR-i+ motherboard. The X7DBR-8+/X7DBR-i+

supports dual Intel XEON 64-bit dual core processors at a front side bus speed of

667 MHz/1.066 GHz/1.333 GHz. With dual 64-bit Xeon dual core processors, the

5000P chipset, and 16 DDR2 FBD 667/533 memory modules built-in, the X7DBR-

8+/X7DBR-i+ offers substantial functionality and performance enhancements to the

motherboards based on the NetBurst microarchitecture while remaining compat-

ible with the 32-bit based software. The features include Intel Hyper-Threading

Technology, Virtualization Technoogy, Hyper Pipelined Technology, Execution Trace

Cache, Thermal Monitor 1/2 (TM1/TM2), Enhanced Intel SpeedStep technology,

Advanced Dynamic Execution, Advanced Transfer Cache, Streaming SIMD Exten-

sions 3 (SSE3) and Extended Memory 64 Technology (EM64T). These features

allow the motherboard to operate at much higher speeds with better power manage-

ment in much safer environments than the traditional motherboards. The X7DBR-

8+/X7DBR-i+ is ideal for high performance dual processor (DP) enterprise server

environments. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the mainboard

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when

installing the processor, memory modules and other hardware components into

the system. If you encounter any problems, see , which describes Chapter 3

troubleshooting procedures for the video, the memory and the system setup stored

in CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A and Appendix B provide BIOS POST Messages and POST Codes.

Appendix C, Appendix D and Appendix E list HostRAID Setup Guidelines and

Other Software Driver and Program Installation Instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent

catastrophic system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation

or to prevent damage to the components.

(*Note): Note: Additional Information given to differentiate various models or

to ensure correct system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DBR-i+
Breedte:	347 mm
Diepte:	330 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	6
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Processor socket:	LGA 771 (Socket J)
PCI Express slots versie:	2.0
Processorfabrikant:	Intel
Maximum intern geheugen:	64 GB
On-board graphics adapter model:	AMD ES1000
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5000P
Ondersteunde opslagstationinterfaces:	SATA
PS/2 poort(en):	1
Component voor:	Server
Geheugen voltage:	1.5, 1.8 V
Soorten RAID:	0, 1,5, 10
Aantal ondersteunde processoren:	2
Maximum UDIMM geheugen:	64 GB
Aantal DIMM sloten:	16
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 512MB
Ondersteunde geheugen types:	DDR2-SDRAM
Ondersteuning voor processor FSB:	667,1066,1333 MHz
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
Supported memory clock speeds:	533,667 MHz
BIOS type:	AMI
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	1.0
USB 2.0 aansluitingen:	6