Supermicro X7DBi+ Handleiding

Supermicro Moederbord X7DBi+

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X7DBi+ (93 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/93

SUPER

X7DBi+

USER’S MANUAL

Revision 1.1

Manual Revision 1.1

Release Date: June 25, 2009

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.

The vendor assumes no responsibility for any inaccuracies that may be contained in this document,

makes no commitment to update or to keep current the information in this manual, or to notify any

person or organization of the updates. Please Note: For the most up-to-date version of this

manual, please see our web site at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product

described in this manual at any time and without notice. This product, including software, if any,

and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO

USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY

HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE

COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH

HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa

Clara County in the State of California, USA. The State of California, County of Santa Clara

shall be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for

all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class

A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the manufacturer’s instruction manual, may cause harmful

interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your

own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate

Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to

the State of California to cause birth defects and other

reproductive harm.

Unless you request and receive written permission from Super Micro Computer, Inc., you may not

copy any part of this document.

Information in this document is subject to change without notice. Other products and companies

referred to herein are trademarks or registered trademarks of their respective companies or mark

holders.

Printed in the United States of America

Preface

About This Manual

This manual is written for system integrators, PC technicians and knowledge-

able PC users. It provides information for the installation and use of the

X7DBi+ motherboard. The X7DBi+ supports dual Intel Quad-Core and

Dual-Core Xeon 5300/5100/5000 Series processors with a front side bus speed of

1.333 GHz/1.066 GHz/667 MHz. With two 64-bit Quad-Core/Dual-Core processors

installed, the X7DBi+ offers superior performance, system reliability and power ef-

ﬁ ciency for storage platforms. The features supported by this motherboard include

the Intel Core Microarchitecture, ultra dense low-power platform, larger cache with

4 MB shared L2 capacity, the Intel Virtualization Technology, the Intel Extended

Memory 64 Technology (EM64), and the Intel I/O Acceleration Technology (Intel I/

OAT). The X7DBi+ offers a superb solution for intense computing and complex I/O

performance, especially ideal for high-end server platforms. Please refer to our web

site (http://www.supermicro.com/products/motherboard/) for updates on supported

processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 describes the features, speciﬁ cations and performance of the main board

and provides detailed information about the chipset.

Chapter 2 provides hardware installation instructions. Read this chapter when in-

stalling the processor, memory modules and other hardware components into the

system. If you encounter any problems, see , which describes trouble-Chapter 3

shooting procedures for video, memory and system setup stored in the CMOS.

Chapter 4 includes an introduction to BIOS and provides detailed information on

running the CMOS Setup utility.

Appendix A Appendix Cprovides BIOS Beep Codes. Appendix B and list the

Windows OS and other software installation instructions.

Conventions Used in the Manual:

Special attention should be given to the following symbols for proper installation and

to prevent damage done to the components or injury to yourself:

Danger/Caution: Instructions to be strictly followed to prevent catastrophic

system failure or to avoid bodily injury.

Warning: Important information given to ensure proper system installation or

to prevent damage to the components.

Note: Additional Information given to differentiate various models or to ensure cor-

rect system setup.

iii

Preface

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X7DBi+
Breedte:	3300 mm
Diepte:	3470 mm
Ethernet LAN:	Ja
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Duurzaamheidscertificaten:	RoHS
Temperatuur bij opslag:	-40 - 70 °C
Processor socket:	LGA 771 (Socket J)
Processorfabrikant:	Intel
Maximum intern geheugen:	64 GB
On-board graphics adapter model:	AMD ES1000
Luchtvochtigheid bij opslag:	5 - 95 procent
ECC:	Ja
Ethernet interface type:	Gigabit Ethernet
Chipset moederbord:	Intel® 5000P
Ondersteunde opslagstationinterfaces:	IDE/ATA
PS/2 poort(en):	2
Seriële poort(en):	2
PCI Express x8 slots:	2
PCI Express x4 slots:	3
Geheugen voltage:	1.8 V
LAN controller:	Intel® 82563EB
Soorten RAID:	0, 1,5, 10
Wake-on-LAN:	Ja
Aantal ondersteunde processoren:	2
Intel® Xeon series:	5100,5000,5300,5400
Aantal DIMM sloten:	16
Ondersteunend DIMM module capaciteiten:	1GB, 2GB, 4GB, 512MB
Parallelle poort(en):	1
Ondersteunde geheugen types:	DDR2-SDRAM
Ondersteuning voor processor FSB:	667,1066,1333 MHz
Wifi:	Nee
Bedrijfstemperatuur (T-T):	10 - 35 °C
Relatieve vochtigheid in bedrijf (V-V):	8 - 90 procent
PCI-X slots:	1
Moederbord form factor:	Verlengd ATX
Supported memory clock speeds:	533,667 MHz
BIOS type:	EEPROM
Grootte BIOS-geheugen:	64 Mbit
ACPI version:	2.0
ATX Power connector (24-pin):	Ja
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	3
Chassis intrusion aansluiting:	Ja
On-board graphics adapter geheugen:	16 MB
Processor aantal cores ondersteund:	2, 4