Supermicro X6DH8-G2 Handleiding

Supermicro Moederbord X6DH8-G2

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X6DH8-G2 (104 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/104

X6DH8-G2

X6DHE-G2

USER’S MANUAL

Revision 1.1b

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be

contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please see our web site at

www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,

INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super

Micro's total liability for all claims will not exceed the price paid for the hardware product.

*California Best Management Practices Regulations for Perchlorate Materials: This Perchlo-

rate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells.

"Perchlorate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/

perchlorate".

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

FCC Statement: This equipment has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance with the manufacturer’s instruc-

tion manual, may cause harmful interference with radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case you

will be required to correct the interference at your own expense.

Revision Number: Rev. 1.1b

Release Date: June 5, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the X6DH8-G2/X6DHE-G2 motherboard. The X6DH8-G2/

X6DHE-G2 supports single or dual Intel® NoconaTM processors at a 800

MHz front side bus. Based upon Intel's NetBurst microarchitecture, the

Nocona processor supports the IA-32 software and includes features

found in the XeonTM processor such as Hyper Pipelined Technology, which

includes a multi-stage pipeline, allowing the processor to operate at much

higher core frequencies. Packaged in a 604-pin Flip Chip Micro Pin Grid

Array(FC-mPGA4) platform in a Zero Insertion Force(ZIF) socket (mPGA

604), the Nocona Processor, which supports Hyper-Threading Technology

and Intel EM64T, is ideal for high performance workstation and server

environments with up to two processors on one system bus. Please refer

to the motherboard specifications pages on our web site (http://

www.supermicro.com/Product_page/product-m.htm) for updates on sup-

ported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the mainboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE

interfaces, the parallel and serial ports, the keyboard and mouse, the power

supply and various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ [Frequently Asked

Questions] section is provided.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A provides BIOS POST codes.

Appendix B provides software and the OS installation instructions.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X6DH8-G2
Breedte:	305 mm
Diepte:	332 mm
Type stroombron:	ATX
Aantal USB 2.0-poorten:	2
VGA (D-Sub)poort(en):	1
Aantal Ethernet LAN (RJ-45)-poorten:	2
Meegeleverde software:	Super Doctor III, Watch Dog, NMI\n
Aansluitingen:	National 87427
Processor socket:	mPGA4
Processorfabrikant:	Intel
Maximum intern geheugen:	16 GB
Compatibele besturingssystemen:	Windows2000, Windows2003, xp, Linux, Fedora
Netwerkfuncties:	Intel 82546
ECC:	Ja
Chipset moederbord:	Intel® E7520
PS/2 poort(en):	2
Seriële poort(en):	1
Soorten RAID:	0, 1,10
Uitbreidingsslots:	PCI-Express 2(x8), 1(x4), PCI-X 1x (64-bit/133MHz), 2x(64-bit/100MHz)
Maximum geheugen grafische adapter:	8 MB
Parallelle poort(en):	1
Aantal eSATA-poorten:	2
Moederbord form factor:	Verlengd ATX
Aantal geheugenslots:	8
Grootte BIOS-geheugen:	64 Mbit
Aansluiting voor CPU koeler:	Ja
Aansluiting voor ventilator van voeding:	Ja
USB 2.0 aansluitingen:	3
Aansluiting voor diskettestation:	Ja
Grafische controller:	ATI Rage XL SVGA PCI
RAID-ondersteuning:	AOC-LPZCR1, AOC-LPZCR2, AOC-LPZCR3