Supermicro X6DAL-TB2 Handleiding

Supermicro Moederbord X6DAL-TB2

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X6DAL-TB2 (116 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/116

X6DAL-B2

X6DAL-TB2

USER’S MANUAL

Revision 1.1

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be contained

in this document, makes no commitment to update or to keep current the information in this

manual, or to notify any person or organization of the updates. Please Note: For the most

up-to-date version of this manual, please see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described in

this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or

reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM

THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF AD-

VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO

COMPUTER SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA

STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, RE-

PLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE,

OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of Santa

Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro’s total

liability for all claims will not exceed the price paid for the hardware product.

This equipment has been tested and found to comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed and used in accordance with

the manufacturer’s instruction manual, may cause interference with radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, you are encouraged to try to correct the

interference by one or more of the following measures: · Reorient or relocate the receiving

antenna. · Increase the separation between the equipment and the receiver. · Connect the

equipment into an outlet on a circuit different from that to which the receiver is connected.

· Consult the dealer or an experienced radio/television technician for help.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate

warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Per-

chlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlor-

ate”

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other reproduc-

tive harm.

Revision Number: Rev. 1.1

Release Date: June 12, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the X6DAL-B2/X6DAL-TB2 motherboard. The X6DAL-

B2/X6DAL-TB2 supports single or dual Intel® Xeon NoconaTM processors at

a 800 MHz front side bus. Based upon Intel's NetBurst microarchitecture,

the Xeon EM64T (Nocona) processor supports IA-32 and IA-64 software

and includes features found in the XeonTM processor such as Hyper

Pipelined Technology, which includes a multi-stage pipeline, allowing the

processor to operate at much higher core frequencies. Packaged in a 604-

pin Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion

Force(ZIF) socket (mPGA 604), the Xeon EM64T Processor (800 MHz) sup-

ports Hyper-Threading Technology and is ideal for high performance work-

station and server environments with up to two processors on one system

bus. Please refer to the motherboard specifications pages on our web site

(http://www.supermicro.com/products/motherboard/) for updates on sup-

ported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the mainboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE

interfaces, the parallel and serial ports, the keyboard and mouse, the power

supply and various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ [Frequently Asked

Questions] section is provided.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A lists BIOS Error Beep Codes and DS LED POST Codes.

Appendix B provides BIOS POST codes.

Appendix C provides software installation instructions.

Appendix D provides installation instructions on the Adaptec SATA

HostRAID Driver based on Marvell's chip.

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	X6DAL-TB2
Type stroombron:	ATX
Aantal USB 2.0-poorten:	2
Aantal Ethernet LAN (RJ-45)-poorten:	2
Aansluitingen:	2x EIDE
Processor socket:	Socket 604(mPGA604)
Processorfabrikant:	Intel
Maximum intern geheugen:	12 GB
Flash memory:	8 MB
Chipset moederbord:	Intel® E7525
Afmetingen (B x D x H):	305 x 254 mm
PS/2 poort(en):	2
Seriële poort(en):	2
LAN controller:	Broadcom BCM5721
Soorten RAID:	0, 1,10
Uitbreidingsslots:	1 (x16) PCI-Express, \n2x 64-bit 66MHz PCI-X, \n2x 32-bit 33MHz PCI
Parallelle poort(en):	1
Ondersteuning voor processor FSB:	800 MHz
Moederbord form factor:	ATX
Aantal SATA-aansluitingen:	6
USB 2.0 aansluitingen:	2
Aansluiting voor diskettestation:	Ja