Supermicro X12STD-F Handleiding
Supermicro
Moederbord
X12STD-F
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro X12STD-F (1 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/1
SUPERMICR R
ContaCt nformatIon I
• Manuals: http://www.supermicro.com/support/manuals
• Drivers & Utilities: https://www.supermicro.com/wdl/driver/
• Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2021 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P CaCkage ontents
X12stD-f
Q r g 1.00uICk eferenCe uIDe
• One Supermicro Motherboard
• One Quick Reference Guide
• Website: www.supermicro.com
• General Information: marketing@supermicro.com
• Technical Support: support@supermicro.com
• Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f or your system to work ProPerly Please DownloaD aPProPrIate,
DrIvers Images user s manual from the lInks below/ / ' :
MNL-2369-QRG 100
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
SRW3
CPU
X12STD-F
REV: 1.02
DESIGNED IN USA
MH6
SRW1
LEDM1
JTPM1
MH2
MH3
MH1
JKVM1
LED1
JMD1JMD2
MH7 MH4
SAS2
SAS1
J1
MH9
JPWR1
JBT1
SRW5
SRW4 SRW2
BT1
S-SGPIO1
DIMMB1
DIMMB2
DIMMA1
DIMMA2
MH8
JPG1
JVRM1
JVR1
JPME2
JWD1
J3
JBM1
JPO1
JPT1 JCPLD1
CPU SLOT1 PCIE 4.0 X8
CPU MICRO-LP PCIE 4.0 X8
MAC CODE
BAR CODE
BIOS LICENSE
LED2
JUIDB1
USB2 (3.0)
SW1 USB0/1
J2
JPCIE1
Connectors
DIMM Memory Installation
Jumpers, Connectors, and LED Indicators Memory SupportMotherboard Layout and Features
Jumpers
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in
this guide.
Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors, and LED indicators. Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
LED Indicators
The X12STD-F motherboard supports up to 128GB of ECC and Non-ECC
UDIMM DDR4 memory with speeds of up to 3200MHz in four memory slots.
Recommended Population (Balanced)
DIMMA1 DIMMB1 DIMMA2 DIMMB2 Total System Memory
4GB 4GB 8GB
4GB 4GB 4GB 4GB 16GB
8GB 8GB 16GB
8GB 8GB 8GB 8GB 32GB
16GB 16GB 32GB
16GB 16GB 16GB 16GB 64GB
32GB 32GB 64GB
32GB 32GB 32GB 32GB 128GB
64GB 64GB 128GB
Jumper Description Default Setting
J1 SATA/SAS Select Pins 1-2: Onboard SATA
Pins 2-3: AOC SAS
JBM1 Disable IPMI Share LAN Pins 1-1 (Enabled)
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME2 Manufacturing Mode Pins 1-2 (Normal)
JPO1 CPU Throttle When PWR_Fail Pins 2-3 (Disabled)
JPT1 Onboard TPM Enable/Disable Pins 2-3 (Disabled)
JWD1 Watch Dog Pins 1-2 (Reset)
LED Description Status
LED1 Unit Identiîš¿er LED Solid Blue: Unit Identiîš¿ed
LED2 OH/Power Fail/FAN Fail Blinking Red: Power Fail or FAN Fail
Solid Red: Overheat
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
Connector Description
BT1 Onboard Batttery
J2 CPU MICRO-LP PCIe 4.0 p1-x8 Slot
J3 RESET Button (Debug Only)
JKVM1 KVM Connector
JMD1 M.2 Slot (PCIe 3.0 x4/I-SATA 3.0)
JMD2 M.2 Slot (PCIe 3.0 x4/I-SATA 3.0)
JPCIE1 CPU PCIe 4.0 p1-x8 Slot
JPWR1 Power Connector
JTPM1 Trusted Platform Module/Port 80 Connector
JVR1 VRM SMBus to Header
JUIDB1 UID Button
SAS1, SAS2 SAS Ports
SRW1 - SRW5 M.2 Mounting Holes
S-SGPIO1 Serial Link General Purpose I/O Header
SW1 Power Switch, Power LED
USB0/1 USB 2.0 Ports
USB2 USB 3.2 Type-C Port
CPU Installation
Pin 1
Socket Key
CPU Key
Heatsink Installation
Thermal
Grease
Screw 1 Screw 2
Screw 3
Screw 4
Mounting
Holes
CPU Support
The X12STD-F motherboard supports an Intel Xeon E-2300 Family processor and
Pentium processor with up to 95W in an LGA1200 socket.
Back Panel I/O Connectors
1
4
1
3
1
2
1
1
# #Description Description
1. KVM 3. USB Type C
2. 4.Power Switch UID Button
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | X12STD-F |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro X12STD-F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
8 April 2024
8 April 2024
8 April 2024
8 April 2024
20 November 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
25 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024
20 Maart 2024
20 Maart 2024
19 Maart 2024