Supermicro SuperServer 5018D-FN4T Handleiding
Supermicro
Niet gecategoriseerd
SuperServer 5018D-FN4T
Bekijk gratis de handleiding van Supermicro SuperServer 5018D-FN4T (118 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 36 mensen en kreeg gemiddeld 4.5 sterren uit 18.5 reviews. Heb je een vraag over Supermicro SuperServer 5018D-FN4T of wil je andere gebruikers van dit product iets vragen? Stel een vraag
Pagina 1/118

USER’S MANUAL
Revision 1.0
S SUPER ERVER®
5018D-FN4T

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Manual Revision 1.0
Release Date: April 27, 2015
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2015 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

iii
Preface
Preface
About this Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the SuperServer. Installation and
maintainance should be performed by experienced technicians only.
Please refer to the server specications page on our Web site for updates on
supported memory, processors and operating systems (http://www.supermicro.
com).
Warnings
Special attention should be given to the following symbols used in this manual.
Warning! Indicates high voltage may be encountered when performing
a procedure.
Warning! Indicates important information given to prevent equipment/
property damage or personal injury.
Product specificaties
Merk: | Supermicro |
Categorie: | Niet gecategoriseerd |
Model: | SuperServer 5018D-FN4T |
Kleur van het product: | Zwart, zilver |
Gewicht: | 3620 g |
Breedte: | 437 mm |
Diepte: | 249 mm |
Hoogte: | 43 mm |
LED-indicatoren: | Ja |
Aan/uitschakelaar: | Ja |
Processorfamilie: | Intel |
Ethernet LAN: | Ja |
VGA (D-Sub)poort(en): | 1 |
Aantal Ethernet LAN (RJ-45)-poorten: | 5 |
Netvoeding: | 200 W |
Duurzaamheidscertificaten: | RoHS |
Ethernet LAN, data-overdrachtsnelheden: | 10,100,1000 Mbit/s |
Temperatuur bij opslag: | -40 - 70 °C |
Aantal ventilatoren: | 1 ventilator(en) |
Aantal poorten USB 3.2 Gen 1 (3.1 Gen 1) Type A: | 2 |
Processor socket: | BGA 1667 |
Maximum intern geheugen: | 128 GB |
On-board graphics adapter model: | Aspeed AST2400 |
Luchtvochtigheid bij opslag: | 5 - 95 procent |
Type behuizing: | Rack (1U) |
ECC: | Ja |
Ethernet interface type: | Fast Ethernet, Gigabit Ethernet |
Trusted Platform Module (TPM): | Ja |
PCI Express x16 slots: | 1 |
Koperen ethernetbekabelingstechnologie: | 1000BASE-T, 100BASE-T, 10BASE-T |
Ondersteunde opslagstationinterfaces: | SATA II |
Seriële poort(en): | 2 |
Geheugen voltage: | 1.5 V |
LAN controller: | Intel I350-AM2, Realtek RTL8201N |
Aantal SATA III connectors: | 6 |
Non-ECC: | Ja |
Compatibele processors: | Intel® Xeon® |
Aantal ondersteunde processoren: | 1 |
Intel® Xeon series: | D-1500 |
Maximum UDIMM geheugen: | 128 GB |
Aantal DIMM sloten: | 4 |
Ondersteunend DIMM module capaciteiten: | 16GB, 32GB, 4GB, 8GB |
Aantal storage drives ondersteund: | 2 |
Opslagschijf afmetingen ondersteund: | 2.5, 3.5 " |
Ondersteunde geheugen types: | DDR4-SDRAM |
Hot-swap HDD bays: | Nee |
AC-ingangsspanning: | 100 - 240 V |
AC-ingangsfrequentie: | 50 - 60 Hz |
Bedrijfstemperatuur (T-T): | 10 - 35 °C |
Relatieve vochtigheid in bedrijf (V-V): | 8 - 90 procent |
Code geharmoniseerd systeem (HS): | 84714100 |
Trusted Platform Module (TPM) version: | 1.2 |
Ventilator diameter: | 40 mm |
BIOS type: | AMI |
Grootte BIOS-geheugen: | 64 Mbit |
ACPI version: | 4.0 |
Intelligent Platform Management Interface (IPMI) support: | Ja |
IPMI LAN (RJ-45) port: | Ja |
BIOS-functies: | PCI 2.3, APM 1.2, Plug & Play, UEFI |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro SuperServer 5018D-FN4T stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Niet gecategoriseerd Supermicro
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
13 Juni 2025
4 Juni 2025
2 Mei 2025
2 Mei 2025
12 April 2025
Handleiding Niet gecategoriseerd
- Rohl
- Hawke
- Kreg
- Doffler
- ProFlo
- Monacor
- DataComm
- Proviel
- CE Labs
- Lindam
- Grasslin
- Digigram
- Devolo
- Strymon
- Sage
Nieuwste handleidingen voor Niet gecategoriseerd
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025