Supermicro PDSML-E+ Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro PDSML-E+ (101 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/101
PDSML-LN1+
PDSML-LN2+
PDSML-E+
USER’S MANUAL
Revision 1.1b
Manual Revision: Rev. 1.1b
Release Date: June 9, 2009
Unless you request and receive written permission from SUPER MICRO COMPUTER, INC., you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER, INC. BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE
USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC.
SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED
WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,
INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best rnia Best Management Practices Regulations for Perchlorate Materials: This Per-
chlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells.
“Perchlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlo-
rate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Preface
About This Manual
Thi s man ual is wr itte n for sys tem in teg rato rs, PC te chn ici ans and
knowledgeable PC users. It provides information for the installation and use of the
PDSML-LN1+/PDSML-LN2+/PDSML-E+ motherboard. It supports single
Intel® Xeon® 3200/3000, Core™ 2 Duo Series, Pentium
® D (Dual-Core), Pentium
4, and Celeron® D LGA (Land Grid Array) 775 Processors at system bus speeds of
1066/800/533 MHz. The processor is housed in a Flip-Chip Land Grid Array (FC-
LGA4) package that interfaces with the motherboard via an LGA775 socket. The
PDSML-LN1+/PDSML-LN2+/PDSML-E+ also supports Intel Hyper-Threading (HT)
technology, EM64T technology, Enhanced Intel SpeedStep
® Technology (EIST) and
Matrix Storage Technology. Please refer to the motherboard specications pages
on our web site (http://www.supermicro.com/products/motherboard/) for updates or
visit Intel's web site for processor support. This product is intended to be installed
and serviced by a professional technician.
Manual Organization
Chapter 1 describes features, specications and detailed information about the
motherboard and the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into
the system.
Chapter 3 describes troubleshooting procedures for the video, the memory and the
system setup stored in CMOS if you encounter problems.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A Appendix B Apand list BIOS POST Error Codes and Messages. -
pendix C provides Software Installation Instructions.
Conventions Used in the Manual
Special attention should be given to the following symbols for proper installation
of the components and to prevent damage done to the components or injury to
yourself:
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation or
to prevent damage to the components.
Note: Additional Information given to differentiate various models or to ensure
correct system setup.
Preface
iii


Product specificaties

Merk: Supermicro
Categorie: Moederbord
Model: PDSML-E+

Heb je hulp nodig?

Als je hulp nodig hebt met Supermicro PDSML-E+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden