Supermicro P8SCi Handleiding

Supermicro Moederbord P8SCi

Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro P8SCi (96 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/96

P8SC8

P8SCi

USER’S MANUAL

Revision 1.0c

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. The vendor assumes no responsibility for any inaccuracies that may be

contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please see our web site at

www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,

INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes. Super

Micro's total liability for all claims will not exceed the price paid for the hardware product.

*California Best Management Practices Regulations for Perchlorate Materials: This Perchlo-

rate warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells.

"Perchlorate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/

perchlorate".

WARNING: Handling of lead solder materials used in this

product may expose you to lead, a chemical known to the

State of California to cause birth defects and other repro-

ductive harm.

FCC Statement: This equipment has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio fre-

quency energy and, if not installed and used in accordance with the manufacturer’s instruc-

tion manual, may cause harmful interference with radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case you

will be required to correct the interference at your own expense.

Revision Number: Rev. 1.0c

Release Date: June 8, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the P8SC8/P8SCi motherboard. The P8SC8/P8SCi supports

single Intel Pentium® 4 Processor (the Prescott Processor) in the 775-Land

Grid Array Package (LGA 775) at a system bus speed of 800 MHz. The

Pentium 4 Processor in the 775-Land Grid Array Package is housed in a

Flip-Chip Land Grid Array (FC-LGA4) package that interfaces with the moth-

erboard via an LGA775 socket. The package consists of a processor core

mounted on a substrate land-carrier. An integrated heat spreader (IHS) is

attached to the package substrate and core and serves as the contacting

surface for processor component thermal solutions, such as a heatsink.

Please refer to the motherboard specifications pages on our web site (http:/

/www.supermicro.com/Product_page/product-m.htm) for updates on sup-

ported processors. This product is intended to be professionally installed.

Manual Organization

Chapter 1 includes a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the P8SC8/P8SCi mainboard and provides detailed information about the

chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when installing the processor and DDR2 memory modules

and when mounting the mainboard in the chassis. Also refer to this chapter

to connect the floppy and hard disk drives, the IDE interfaces, the parallel

and serial ports, the mouse and keyboard and the twisted wires for the

power supply, the reset button, the keylock/power LED and the speaker.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ (Frequently Asked

Questions) section is provided. Instructions are also included for contact-

ing technical support. In addition, you can visit our web site at

www.supermicro.com/techsupport.htm for more detailed information.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A provides BIOS POST Messages.

Appendix B lists BIOS POST Codes.

Appendix C lists Software Drivers and the OS Installation Instructions.

Preface

iii

Product specificaties

Merk:	Supermicro
Categorie:	Moederbord
Model:	P8SCi
Type stroombron:	ATX
Meegeleverde software:	Optional IPMI (Intelligent Platform Management Interface) 2.0 \nSuper Doctor III \nWatch Dog \nNMI\n
Processor socket:	LGA 775 (Socket T)
Processorfabrikant:	Intel
Netwerkfuncties:	2x Broadcom BCM5721 Gigabit Ethernet Controllers
Flash memory:	8 MB
Chipset moederbord:	Intel® E7221
Afmetingen (B x D x H):	305 x 240 mm
Uitbreidingsslots:	2 (x1) PCI-Express, \n 1x 64-bit 133MHz PCI-X, \n 1x 32-bit 33MHz PCI
Moederbord form factor:	ATX
Grafische controller:	Onboard integrated server quality graphics in MCH
Soort aansluiting controller:	Intel ICH6R SATA controller