Supermicro P4SPA+ Handleiding
Supermicro
Moederbord
P4SPA+
Lees hieronder de 📖 handleiding in het Nederlandse voor Supermicro P4SPA+ (68 pagina's) in de categorie Moederbord. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/68
P4SPA+
P4SPE
USER’S MANUAL
Revision 2.1a
Manual Revision: 2.1a
Release Date: July 20, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described in this
manual at any time and without notice. This product, including software, if any, and documenta-
tion may not, in whole or in part, be copied, photocopied, reproduced, translated or reduced to any
medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL NOT
HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING
OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
manufacturer’s instruction manual, may cause interference with radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, you are encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/television technician for help.
*California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
•
•
•
•
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of
the SUPER P4SPA+/P4SPE motherboard. The P4SPA+/P4SPE supports single
Intel Pentium® 4 478-pin, 0.13 micron processors up to 3.4 GHz at a system bus
speed of 800/533/400 MH, or Intel Celeron 478-pin, 0.13 micron processors up to
2.4 GHz at a system bus speed of 400 MHz. Pentium 4 processors are housed in
a 478-pin micro PGA (Plastic Grid Array) package. Please refer to the motherboard
specifi cations pages on our web site (http://www.supermicro.com/products/moth-
erboard/) for updates on supported processors. This product is intended to be
professionally installed.
Manual Organization
Chapter 1 includes a checklist of what should be included in your mainboard box,
describes the features, specifi cations and performance of the P4SPA+/P4SPE main
board and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices. Read
this chapter when installing the processor and DDR memory modules and when
mounting the mainboard in the chassis. Also refer to this chapter to connect the
fl oppy and hard disk drives, the IDE interfaces, the parallel and serial ports, the
mouse and keyboard and the twisted wires for the power supply, the reset button,
the keylock/power LED and the speaker.
If you encounter any problems, see Chapter 3, which describes troubleshoot-
ing procedures for the video, the memory and the setup confi guration stored in
CMOS. For quick reference, a general FAQ (Frequently Asked Questions) section
is provided. Instructions are also included for contacting technical support. In ad-
dition, you can visit our web site at www.supermicro.com/techsupport.htm for more
detailed information.
Chapter 4 includes an introduction to BIOS and provides detailed information on
running the CMOS Setup utility.
Appendix A provides BIOS POST Codes.
Appendix B lists BIOS POST Messages.
iii
Preface
Product specificaties
| Merk: | Supermicro |
| Categorie: | Moederbord |
| Model: | P4SPA+ |
Heb je hulp nodig?
Als je hulp nodig hebt met Supermicro P4SPA+ stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Moederbord Supermicro
8 April 2024
8 April 2024
8 April 2024
8 April 2024
20 November 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
6 September 2023
Handleiding Moederbord
- Moederbord Asus
- Moederbord Asrock
- Moederbord EPoX
- Moederbord Evga
- Moederbord Gigabyte
- Moederbord MSI
- Moederbord Sharkoon
- Moederbord NZXT
- Moederbord Intel
- Moederbord ECS
- Moederbord Foxconn
- Moederbord Elitegroup
- Moederbord Biostar
Nieuwste handleidingen voor Moederbord
25 April 2024
31 Maart 2024
31 Maart 2024
30 Maart 2024
30 Maart 2024
30 Maart 2024
25 Maart 2024
20 Maart 2024
20 Maart 2024
19 Maart 2024